GNU ! D <@xc$ B$!( B4+( c4X B" c,o ?B& D%& Ms& C%& B$! V_& T_' ERROR:%s:%d: Device already open <7> ERROR:%s: Error from CPPI4 PAL Init() <7>%s: Using loopback SAR firmware <7> ERROR:%s: Error %08X from CPPI4 PAL DisableTxChannel() <7> ERROR:DDC: cpsarDisableChannel: Error %08X from CPPI4 PAL ChClose() <7> ERROR:DDC_cpsarChClose:%d: Error disabling channel %d in %s direction <7> ERROR:DDC: cpsarUnInitTxChannel:%d: TX CPPI Channel %d structure already freed <7> ERROR:DDC_cpsarChClose:%d: Error in UnInit of TX channel %d <7> ERROR:RX CPPI Channel %d structure already freed hDDC->rxIsCreated = %x <7> ERROR:DDC_cpsarDeleteInstance:%d: Instance NOT created / Already deleted <7> ERROR:DDC_cpsarChOpen:%d: %s channel %d should be in DDC_NET_CH_UNINITIALIZED state <7> ERROR:DDC_cpsarChOpen:%d: Invalid TX Channel=%d specified <7> ERROR:DDC_cpsarChOpen:%d: TX Channel %d already open <7> ERROR:DDC: cpsarInitTxChannel:%d: Failed to allocated %d bytes for BD pool memory for ch %d <7> ERROR:DDC_cpsarChOpen:%d: Error in initializing TX channel %d <7> ERROR:DDC_cpsarChOpen:%d: Invalid RX Channel=%d specified <7> ERROR:DDC_cpsarChOpen:%d: RX Channel %d already open <7> ERROR:DDC: cpsarInitRxChannel:%d: Failed to allocate memory for rxBufferPtr %d <7> ERROR:DDC: cpsarInitRxChannel:%d: Failed to allocate memory for rxDataToken %d <7> ERROR:DDC: cpsarInitRxChannel:%d: Failed to allocate memory for RX packet queue %d <7> ERROR:DDC: cpsarInitRxChannel:%d: Failed to allocate memory for RX buffer queue %d <7> ERROR:DDC_cpsarChOpen:%d: Error in initializing RX channel %d <7> ERROR:DDC: cpsarEnableChannel:%d: Invalid Channel %d. TX CPPI structure NULL <7> ERROR:%s: Error from CPPI4 PAL TxChOpen() for ch %d <7> ERROR:cpsarEnableChannel: Error %08X from CPPI4 PAL EnableTxChannel() <7> ERROR:cpmacEnableChannel: Error %08X from CPPI4 PAL EnableTxIntr() <7> ERROR:DDC: cpsarEnableChannel:%d: Invalid Channel %d. RX CPPI structure NULL <7> ERROR:DDC: cpsarEnableChannel: Error from CPPI4 PAL RxChOpen() <7> ERROR:%s:%d: Failed to allocate mem chunk for RX CPPI Ch %d <7> ERROR:%s:%d: Failed to allocated mem for BD pool memory for RX CPPI Ch %d <7> ERROR:DDC: %s: Error in RX Buffer allocation for channel %d <7> ERROR:%s: Error %08X from CPPI4 PAL EnableRxChannel() <7> ERROR:cpmacEnableChannel: Error %08X from CPPI4 PAL EnableRxIntr() <7> ERROR:DDC_cpsarChOpen:%d: Error enabling channel %d in %d direction <7> ERROR:%s DDC not initialized as yet <4>[dsl_ur8] DDC_cpsarChOpen done:%d: Ch=%d, Dir=%s <7> SAR Stats for channel %d <7> cpsarDumpRxStat: Invalid DDC handle for instance id %d. <7> QosType= %d <7> Priority = %d <7> CellRate = %d <7> Mbs = %d <7> Pcr = %d <7> CPSAR Instance %d , Ch %d Statistics <7> TX Teardown pending ... <7> <7> TX Int Count = %u <7> TX Int with no active pkts = %u <7> TX Out of BD's = %u <7> RX Teardown pending ... <7> RX Int Count = %u <7> RX Int with no active pkts = %u <7> RX Out of Buffers = %u <7> RX CRC Errors = %u <7> RX Length Errors = %u <7> RX Abort Errors = %u <7> RX Recycle Multi BDs = %u <7> ERROR:%s:TX CPPI Channel %d structure already freed <7>%s: Got incorrect teardown BD %p <7>%s: Warning: Channel %d is not open. <7>Channel %d is closed. cnt=%d <3>[ur8_dsl] %s skb1=0 <3>[ur8_dsl] %s vcc = 0 ! vcc=Null include/linux/skbuff.h <7>failed to setup OAM channel =%d. [dsl_ur8] sync dropped, reason flags: 0x%x tmode <7>%s : Setting mode to %#x T1413 GDMT GLITE MMODE NMODE AD2MOD AD2DEL A2PMOD A2PDEL <7>%s: Cannot allocate memory <7> ERROR:%s: Error %08X from DDC_cpsarCreateInstance() <7> ERROR:%s: Error %08X from DDC_cpsarInit() <3>[dsl_ur8] Could not get OAM tx queue resource (nb %d)! Conflicts will exist! <3>[dsl_ur8] Could not get OAM tx complete queue resource (nb %d)! Conflicts will exist! <3>[dsl_ur8] Could not get OAM rx queue resource (nb %d)! Conflicts will exist! <3>[dsl_ur8] Could not get OAM rx free queue resource (nb %d)! Conflicts will exist! <7>%s: SAR is already initialized. <7>Failed to init SAR. <7>Using Dummy DSL PHY <7>DSL start failed. Error Code (%d) and priv->pIhw is %p <7>Failed to init DSL. <7>%s : env var DSL_BIT_TMODE is set <3>[dsl_ur8] %s: Done <7>Using user input WDT enable: %d <7>Using user input TurboDSL: %d <7>Using user input CPPI Err Handling: %d <7>Using user input for the number of Rx Buffers %d <7>Using user input for the number of Rx Interrupts %d <7>Using user input for the number of Tx Buffers %d <7>Using user input for the number of Tx Interrupts %d <7>Using user input for the number of reserved (High-Priority) Tx Buffers %d <3>[dsl_ur8] %s: Done priv = %p UR8 <4>[dsl_ur8] deactivating vc <4>[dsl_ur8] %s: rc_rx = %#x rc_tx = %#x <4>[dsl_ur8] activating vpi=%d vci=%d <7>%s: Failed incorrect param. Got pcr = %d and scr = %d <7>failed to setup RX channel =%d with return code %d <7>failed to setup TX channel =%d with return code %d DSL_OAM_UR8 <7>[dsl_ur8] %s: Unbekanntes Event: %d! Closing channel not found. failed to close channel %d. <3>[AVMbk] current_p=%p lowest_p=%p highest_p=%p <3>[dsl_ur8] dslMemLeakCheck: starting. %d unsigned int from Addr %p will be compared <3>[dsl_ur8] dslMemLeakCheck: Mem Leak at Addr= %p val= 0x%08x <3>[dsl_ur8] dslMemLeakCheck: %d compares done. Last checked Addr = %p null priv DDA_atm_open: Clear EOC channel (dmachan=%d) already in use. DDA_atm_open: failed to setup clear_eoc PVC already opened. dmachan = %d No TX DMA channels available failed to activate hw channel <4>[dsl_ur8] Successfully opened vpi=%d vci=%d chan=%d <3>[dsl_ur8] %s cmd=%d u_arg=%p <3>[dsl_ur8] ioctl get status: Copy to Userspace failed! <3>[dsl_ur8] %s cmd=%d k_arg=%p u_arg=%p [dsl_ur8] ioctl could not get dsl parameters [dsl_ur8] ioctl device not initialized! [dsl_ur8] ioctl cannot get DSL features. <3>[dsl_ur8] ioctl retrain the modem [dsl_ur8] dsl test param get: Copy to Userspace failed! [dsl_ur8] ioctl set inventory invoked <3>[dsl_ur8] invalid echotest state: %d <3>[dsl_ur8] dslhal_api_avmTriggerEchotest failed <3>[dsl_ur8] ioctl unsupported IOCTL %d <7>[bk] DSL event: Could Not Allocate Memory for event HWRevision <3>[dsl_ur8] Error: could not read HWRevision, isATA_Ld_Hw=%d <3>[dsl_ur8] hwrev=%s is_ATA_Ld_Hw=%d <3>[dsl_ur8] from DSL to ATA Mode <3>[dsl_ur8] DSP in IDLE Mode <3>[dsl_ur8] SARAS PWDREG = 0x%04x <3>[dsl_ur8] from ATA to DSL Mode <3>[dsl_ur8] DSP in QUIET Mode. State Machine is being restarted <6>[dsl_ur8] ATA State Request: returned AtaState = %d <3>[dsl_ur8] DSL event: Could Not Allocate Memory for event <3>[dsl_ur8] %s: Invalid echotest mode: %d! dsl Konnte Major=%d und Minor=%d nicht registrieren! Error=%d: Konnte Major=%d und Minor=%d nicht registrieren! unable to kmalloc priv structure. Killing autoprobe. TI Avalanche DSL avsar atm_dev_register returning NULL Unable to read user inputs. Killing autoprobe. Error : Failed to Initialize the DSL subsystem !!. dsl_event_stat <7>[bk] avm event register failed ! SAR_TX Could not register DDA_atm_sar_tx_irq SAR_OAM_TX Could not register DDA_atm_sar_oam_tx_irq SAR_RX Could not register DDA_atm_sar_rx_irq SAR_OAM_RX Could not register DDA_atm_sar_oam_rx_irq <3>[dsl_ur8] %s: SAR Interrupt registered DSL Could not register DDA_atm_dsl_irq <3>[dsl_ur8] %s: DSL Interrupt registered <3>[dsl_ur8] Could not get ATM tx queue resource (nb %d)! Conflicts will exist! <3>[dsl_ur8] Could not get ATM tx complete queue resource (nb %d)! Conflicts will exist! <3>[dsl_ur8] Could not get ATM rx queue resource (nb %d)! Conflicts will exist! <3>[dsl_ur8] Could not get ATM rx free queue resource (nb %d)! Conflicts will exist! [dsl_ur8] Powermanagment (States => 1,10) supported! adsl <3>[dsl_ur8] Error: Couldn't register at powermanagment <3>[dsl_ur8] Loading Linux DSL Driver done [dsl_ur8] %s resetting dsl hardware <3>[dsl_ur8] force free dsl tasklet queue element Unable to free user inputs.. [dsl_ur8] %s done!n DDA_atm_exit() <3>[dsl_ur8] DSL Module Removed /dev/null DSL_ATM_UR8 <7>hdlc rx v0.6 len %d msg %x,%x,%x,%x,%x,%x,%x <7>WARNING: DDC_dsl -- max_raw_clear_eoc_msgsize is exceeded Clear EOC Channel: Enabled: %d TxBuf[0]: 0x%08x TxBuf[1]: 0x%08x TxBuf[2]: 0x%08x TxBuf[3]: 0x%08x RxBuf[0]: 0x%08x RxBuf[1]: 0x%08x RxBuf[2]: 0x%08x RxBuf[3]: 0x%08x txRdIndex: %d txWrIndex: %d rxRdIndex: %d rxWrIndex: %d TotalTxPkts: %d TotalRxPkts: %d TotalTxBytes: %d TotalRxBytes: %d ErrBufFull: %d ErrBufIndx: %d ErrBufMax: %d ErrMsgMax: %d ErrTxHDLC: %d ErrRxHDLC: %d ErrRxSnmp: %d ErrRxPush: %d /var/env [dsl_ur8] *** could not open file /var/env [dsl_ur8] *** file size zero:/var/env [dsl_ur8] *** could not read file:/var/env macdsl [dsl_ur8] *** error occurred while trying to set the dsl device serial number [dsl_ur8] *** error occurred while setting device serial number [dsl_ur8] dsl serial number successfully set to " %02x [dsl_ur8] %s *** error occurred while trying to read the EOC struct [dsl_ur8] %s *** error occurred while trying to read dspVersion %d.%02d.%02d.%02d AVM3 [dsl_ur8] %s *** error occurred while setting AVM Fw Version in the EOC struct [dsl_ur8] *** error occurred while getting dsl MAC address, cannot set dsl serial number (mac: "%s", maclen %d, %d) [dsl_ur8] AVM Fw Version successfully set into EOC Stuct %s <3>[dsl_ur8] driver version: %d.%02d.%02d.%02d <3>[dsl_ur8] before enabling Saras Digital Control: ADSLSS_PRCR(0x%08X)=0x%08X! <3>[dsl_ur8] after enabling Saras Digital Control: ADSLSS_PRCR(0x%08X)=0x%08X! <3>[dsl_ur8] %s busy <3>[dsl_ur8] %s ZERO pointer <3>[dsl_ur8] %s dslhal_support_blockRead failed <3>[dsl_ur8] peak %d val %d bin %d <3>[dsl_ur8] Min val %d (will be substracted for display) <3>[dsl_ur8] rfi overflow at bin %d, val=%d min=%d <3>[dsl_ur8] dslhal_support_blockRead (pdspOamInternalSharedInterface) failed! <3>[dsl_ur8] dslhal_support_blockRead (dspOamInternalSharedInterface) failed! <3>[dsl_ur8] dslhal_support_blockRead (modemEnv) failed! <3>[dsl_ur8] dslhal_support_blockRead (data) failed! <3>[dsl_ur8]finished data read <3>[dsl_ur8] %s ptidsl not initialised %d.%02d.%02d.%02d <3>[dsl_ur8] %s invalid values <3>[dsl_ur8] config 0x%08x <3>[dsl_ur8] maint done! MaintCmd: %d <3>[dsl_ur8] DSP_DBG_INFO: tag=0x%02x param1=0x%02x param2=0x%02x <4>[dsl_ur8] %s: Received DSP_ATM_TC_SYNC at %lu <4>[dsl_ur8] %s: Received DSP_ATM_NO_TC_SYNC at %lu <3>[dsl_ur8] AVM Datapump TIDSL <3>[dsl_ur8] PM2EMIF=%08x DM2EMIF=%08x at DSLSS Start Time. PM2EMIF changes when DSL DP runs <3>[dsl_ur8] %s: Done. Datapump version: %02d.%02d.%02d.%02d Invalid bin selected Bin%d : DSL Modem Rx SNR Per Bin for Bin%d : %04x Unknown DSL Modem Statistics: -------------------------------- [DSL Modem Stats] US Connection Rate: %u DS Connection Rate: %u DS Line Attenuation: %u.%u DS Margin: %d.%u US Line Attenuation: %u.%u US Margin: %d.%u US Payload : %u DS Payload: %u US Superframe Cnt : %u DS Superframe Cnt: %u US Transmit Power : %u (0.1dBm) DS Transmit Power: %u (0.1dBm) LOS errors: %u SEF errors: %u Frame mode: %u Max Frame mode: %u Errored Seconds: %u Severely Err Secs: %u Trained Path: %u US Peak Cell Rate: %u Trained Mode: %u Selected Mode: %u ATUC Vendor Code: %X ATUC Revision: %u Showtime Count: %u DS Max Attainable Bit Rate: %d kbps BitSwap: %u US Max Attainable Bit Rate: %u kbps BitSwap: %u US Max Attainable Bit Rate: n/a Annex: %s psd_mask_qualifier: 0x%04x ATUC ghsVid: %02x T1413Vid: %02x %02x T1413Rev: %02x VendorRev: %02x ATUR ghsVid: T1413Vid: %02x %02x T1413Rev: %02x VendorRev: %02x [Upstream (TX) Interleave path] CRC: %u FEC: %u NCD: %u LCD: %u HEC: %u [Downstream (RX) Interleave path] [Upstream (TX) Fast path] [Downstream (RX) Fast path] [ATM Stats] [Upstream/TX] Good Cell Cnt: %u Idle Cell Cnt: %u [Downstream/RX)] Good Cell Cnt: %u Idle Cell Cnt: %u Bad Hec Cell Cnt: %u Overflow Dropped Cell Cnt: %u [SAR AAL5 Stats] Tx PDU's: %u Rx PDU's: %u Tx Total Bytes: %u Rx Total Bytes: %u Tx Total Error Counts: %u Rx Total Error Counts: %u Rx SAR Interrupt Buffer Overflow Counts: %u [OAM Stats] Near End F5 Loop Back Count: %u Near End F4 Loop Back Count: %u Far End F5 Loop Back Count: %u Far End F4 Loop Back Count: %u C62xx Processed F4 Loop Back Cnt: %u C62xx Processed F5 Loop Back Cnt: %u SAR OAM Ping Response Drop Count %d unknown SHOWTIME failTrains=%d Chan Inuse ChanID VPI VCI ------------------------------------------------------------------ %02d %05d %05d %05d %05d DSL HAL version: [%d.%02d.%02d.%02d] DSP Datapump version: [%d.%02d.%02d.%02d] Annex B Annex C Annex A SAR HAL version: [ %d.%d PDSP Firmware version:[%01x.%02x] Chipset ID: [%s] DSL Modem US Bit Allocation: %02x DSL Modem DS Bit Allocation: %d,%d 0,0 <7> Error: Invalid DDC handle. UR8 SAR Instance %d Stats for %d channels: TX Int Count (#2) = %u TX Int with no active pkts = %u RX Int Count (#2) = %u RX Int with no active pkts = %u TX/RX Teardown pending ... SAR Stats for channel %d QosType = %d Priority = %d CellRate = %d Mbs = %d Pcr = %d TX Out of BD's = %u RX Out of Buffers = %u RX CRC Errors = %u RX Length Errors = %u RX Abort Errors = %u RX Recycle Multi BDs = %u trellison trellisoff innerpair outerpair idle retrain reset gainctlon gainctloff gaspolarityon <7>gaspolarityon gaspolarityoff <7>gaspolarityoff losalarmon <7>losalarmon losalarmoff <7>losalarmoff bitswapon bitswapoff rmsgsra <7>rMsgsRA = 0x <7>%02x <7> gainv idepth <7>name =%s, %d carrierperbit <7>address =0x%x <7>writing value =0x%x <7>dslReg=0x%x <7>write mail box cmd =%d <7>DDC_sar_oam_generation: OAM Ping Dropped! pingStat %d, oamHdr %X vpi-vci: (%d,%d) <3>[dsl_ur8] oam near timer! %s %#x ADSL_G.dmt.bis_DELT ADSL_G.dmt.bis_AnxM ADSL_G.dmt.bis_AnxI ADSL_G.dmt.bis_AnxJ DSL Modem SNRpsds: <7>dslhal_api_getSNRpsds failed with %d %d DSL Modem QLNpsds: <7>dslhal_api_getQLNpsds failed with %d UR8 US PMD Test: LATN=%d SATN=%d SNRM=%d attndr=%ld NearActatp=%d FarActatp=%d HLOG(%3d): %d QLN(%3d): SNR(%3d): <3>[dsl_ur8] %s failed <3>[dsl_ur8] DSL in Sync <3>[dsl_ur8] DSL disconnect <3>[dsl_ur8] ATM TC in Sync <3>[dsl_ur8] ATM TC out of Sync AnxA AnxB AnxC AnxI AnxJ AnxL AnxM IDLE INIT <3>[dsl_ur8] datapump path (%s) <6>Unable to load '%s'. <3>[dsl_ur8] DSP binary filesize = %d bytes <6>DSP binary file size exceeds the limit (%d). <6>Failed to read '%s': size is 0 <6>Failed to read '%s' read only %d bytes. <3>[dsl_ur8] %s: Completed Failed: Could not open DSP binary file failed atomic failed kernel EnableQoS = %d Error : Buffer Overflow Use "echo 1> avsar_qos_enable " to enable the QoS Error: Unknown Command sent. Use "echo 1 > avsar_qos_enable" to enable the QoS Use "echo 0 > avsar_qos_enable" to disable the QoS Use "echo 0> avsar_modem_stats " to reset the statistics Resetting AAL5 statistics. Error: Unknown operation on DSL/AAL5 statistics Use "echo 0 > avsar_modem_stats" to reset the statistics DSLDK version:[%03d.%03d.%03d.%03d] ATM Driver version:[%03d.%03d.%03d.%03d] DSP Datapump version: [%d.%02d.%02d.%02d] Private Data Structure(TI DSL): ---------------------------------------- DMEM2EMIF: 0x%08x PMEM2EMIF: 0x%08x gMemLeakErrorCnt %d DDA priv: 0x%p DDC priv: 0x%p dev: 0x%p sar_tx_irq: %02d sar_rx_irq: %02d sar_oam_tx_irq: %02d sar_oam_rx_irq: %02d dsl_irq: %02d Tx Packets Dropped Count: %lu Tx Bad Packets Count: %lu Rx Packets Dropped Count: %lu Rx Bad Packets Count: %lu Feature 0 Feature 1 Interop 0 Interop 1 [dsl ioctl] cannot get DSL features. %s enable : 0x%08x %s control: 0x%08x <3>[dsl_ur8] %s : bad struct pointer <3>[dsl_ur8] %s : Message too short. Format example: 1 0x00000000 <3>[dsl_ur8] %s : Buffer Overflow %u %x <6>[dsl_ur8] %s: channel %d, features 0x%08x <3>[dsl_ur8] %s : Erroneous Feature Channel = %d Define 0 Define 1 Define 2 [dsl ioctl] cannot get DSL datapump defines. %s: 0x%08x <7>%s: Got NULL skb <3>[dsl_ur8] AVM DSL labor Buf Addr: (%08X), size=%d <3>[dsl_ur8] AVM DSL trace Buf Addr: (%08X), size=%d <3>[dsl_ur8] DSP FW und AVM DSL labor und AVM DSL trace Buf Addr: (%08X), size=%d <3>[dsl_ur8] DSP FW und AVM DSL labor trace Buf Addr: (%08X), size=%d <3>[dsl_ur8] DSL Mem Leak Check: Start of reserved memory: 0x%08x, size of reserved memory: 0x%08x, start of DP memory: 0x%08x <3>[dsl_ur8] DSP image page address: (%08X) ARTT buffer page address: (%08X) [dsl_ur8] DSL Diagnose nicht eingeschaltet <3>[dsl_ur8] %s: Free 0x%08x Bytes from Addr 0x%08x <3>[bk] %s entered <3>[dsl_ur8] Cannot create socket! 192.168.178.20 <3>[dsl_ur8] no valid Socket available <3>[dsl_ur8] sock_sendmsg fehlgeschlagen %d 0x%p <3>[bk] tcp_server_init <3>server: Error creating serversocket. <3>server: Error serversocket <3>server: Error creating echo_server <3>[bk] thread created <3>[bk] socket created <3>pga1=%d pga2=%d rxDg=%d fft1Scale=%d echo <6>new connection (%d) from %u.%u.%u.%u <3>[bk] OFF: AFE NM R2 0x%08x <3>[bk] ON: AFE NM R2 0x%08x <3>[bk] Samples Request <3>[bk] rttPtr=%p <3>[bk] unknown command <3>[bk] %30x parmtype=dslMemLeakCheck:charp parmtype=product_fw_version:charp parmtype=avm_rtt:charp parmtype=dslDiagBuf:charp parmtype=ptest:charp parmtype=annex:charp parmtype=product_name:charp parmtype=firmware_load_file:charp license=Proprietary depends= vermagic=2.6.32.41 mod_unload MIPS32_R2 32BIT @ $ Q" yii iff y e0 Qff e0 .%E #.%E #.% $ ygV yg" y '' $## @ $ yNr @ $ Q" yii iff y e0 Qff e0 .%E #.%E #.% $ ygV yg" y '' $## @ $ yNr TSTC avalanche/avsar_ver avalanche/avsar_channels avalanche/avsar_sarhal_stats avalanche/avsar_oam_ping avalanche/avsar_pvc_table avalanche/avsar_rxsnr0 avalanche/avsar_rxsnr1 avalanche/avsar_rxsnr2 avalanche/avsar_rxsnr3 avalanche/clear_eoc_stats avalanche/avsar_bit_allocation_table avalanche/avsar_dsl_modulation_schemes avalanche/avsar_SNRpsds avalanche/avsar_QLNpsds avalanche/avsar_PMDTestus avalanche/avsar_private avalanche/avsar_modem_training avalanche/avsar_modem_stats avalanche/avsar_qos_enable avalanche/avsar_feature_bits avalanche/avsar_define_bits avalanche/avsar_dsllabor avalanche/dsllabor DSL_PHY_CNTL_1 cpufrequency DSL_FEATURE_CNTL_0 DSL_FEATURE_CNTL_1 DSL_PHY_CNTL_0 dsp_freq fine_gain_control fine_gain_value margin_threshold maximum_bits_per_carrier maximum_interleave_depth modulation oam_lb_timeout pair_selection sar_ipacemax SarRxBuf SarRxMax SarTxBuf SarTxMax trellis autopvc_enable bitswap dgas_polarity DSL_BIT_TMODE DSL_UPG_DONE dsp_noboost enable_margin_retrain enable_rate_adapt los_alarm TurboDSL ATM_ETSI eoc_vendor_revision invntry_vernum eoc_vendor_serialnum eoc_vendor_id SarLB CppiErrProc datapump_path SarTxRsv WdtEnable sysfrequency ARTT_MEM dsl_ur8