0>mhyuH 3070704 S?9? N0FH rdinit= init= loglevel quiet debug reset_devices rootdelay= rootfstype= rootflags= rootwait root= load_ramdisk= noinitrd retain_initrd lpj= reboot= nohlt l??b fpe= user_debug= keepinitrd uncached buffered writethrough writeback writealloc noalign boardtype mtdram1= no_console_suspend console= ignore_loglevel log_buf_len= reserve= print-fatal-signals= highres= profile= ntp_tick_adj= clock= clocksource= nohz= audit= irqpoll irqfixup noirqdebug /`bootmem_debug norandmaps noaliencache dhash_entries= ihash_entries= security= elevator= sysrq_always_enabled ar7wdt_no_reboot= max_loop= ethaddr mtdparts= (nxnetdev= (o@ether= <2>SNAP - unable to register with 802.2 rhash_entries= thash_entries= (rT<6>IPv4 over IPv4 tunneling driver ARMv6-compatible processor hsqssqsh 0,0&4 1~BC0 1~BC0 5NP; p_A; p_A; p_A; "I` #EXEC 7j8; p_A; p_A; 7nx; 7nx; 7nx; /=w; 0|0$0 P@ `0 0d"A PIPE bdev beer beep sqsh sqshhsqs esUF esUF esUC dbg "K0L% %cr%d:%08x Backtrace aborted due to bad frame pointer <%p> ! C1!! !~BB !~BB !~BB !~BB 1~BC0 !~BB 1~BC0 !~BB Q~BEP 1~BC0 1~BC0 UUUU3333 0t A TW@,T,@,T- TNVE_MVA xTNVE_MVA 4 h0 0hyuH hyuH hyuH UUUU K 4: 1~BC0 0opro SOCK 0C1"5 0@a& 250b0 1~BC0 V`(J initcall_debug Linux version 2.6.28.10 (jpluschke@EmbeddedVM) (gcc version 4.4.3 (Buildroot 2010.02) ) #1 PREEMPT Wed Sep 8 16:32:31 CEST 2010 %s version %s (jpluschke@EmbeddedVM) (gcc version 4.4.3 (Buildroot 2010.02) ) %s alloc_thread_info consistent_init dma_free_coherent __dma_alloc Ypuma_config_timer write_secure_debug_enable_register puma_cpu_cycle_init puma5_timer_init avalanche_soc_platform_init puma5_ram_mtd_set_rw get_erase_block_size_on_ram_device puma5_mtd_rm_notifier mtdram_setup puma5_squashfs_parser_function puma5_mtd_add_notifier puma5_mtd_init hupdate_sysclk_divisor pp_pref_exec_stats_cmd ti_pp_disable_psm ti_pp_enable_psm setup_host2pp_infra avalanche_ppd_init puma5_register_cpufreq puma5_target wlan_dect_read_config search_wlan_dect_config test_wlan_dect_config PAL_cppi4Init \vfp_single_add vfp_double_add i0RSDTtZX A W pause_on_oops panic <2>BUG: recent printk recursion! printk.time orderly_poweroff run_workqueue 2.6.28.10 preempt mod_unload ARMv6 sys_init_module spurious.irqfixup spurious.noirqdebug rcuclassic.qlowmark rcuclassic.qhimark rcuclassic.blimit write_secure_debug_enable_register __free __reserve alloc_bootmem_core mark_bootmem_node free_all_bootmem_core /k(pageout shrink_slab Unused swap offset entry Bad swap offset entry Unused swap file entry Bad swap file entry kmem_cache_destroy kmem_cache_create dentry_open mnt_init simple_fill_super remove_proc_entry sysfs_fill_super !"#$%&'()*+,-./0123456789:;<=>?@abcdefghijklmnopqrstuvwxyz[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ jffs2_link_node_ref jffs2_fragtree_insert new_fragment check_node_data check_tn_node jffs2_build_inode_fragtree jffs2_get_inode_nodes read_direntry read_more read_dnode read_unknown jffs2_do_read_inode_internal jffs2_do_read_inode jffs2_build_inode_pass1 jffs2_remove_node_refs_from_ino_list jffs2_get_parent __jffs2_dbg_acct_sanity_check_nolock jffs2_wbuf_recover register_security -generic elv_next_request elv_insert blk_rq_check_limits req_bio_endio __end_that_request_first blk_queue_start_tag blk_queue_end_tag init_tag_map blk_queue_ordered blk_queue_max_sectors blk_queue_max_phys_segments blk_queue_max_hw_segments blk_queue_max_segment_size blk_queue_segment_boundary kobject_add_internal kobject_create_and_add n__ratelimit 0123456789ABCDEF0123456789abcdef {zt^f pw0Gm 0cIZ- 68BG+ QC]S% v,;Zk n;^ Qkkbal i]Wb 9a&g MGiI wn>Jj #.zf +o*7 pqrstuvwxyzabcde pty.legacy_count l`'^~", BDCA pqrstuvwxylSRQMnnmPQS 0123456789+-*/ ,.?()# keyboard.brl_nbchords keyboard.brl_timeout vt.underline vt.italic vt.default_blu vt.default_grn vt.default_red `vt.default_utf8 avm_urlader_get_config avm.avm_event_enable_push_button avm.ar7wdt_no_reboot 0123456789ABCDEF avm_DebugSignal push_mail Uart AVM 8250 sysdev_driver_register bus_add_driver driver_bound really_probe class_find_device class_for_each_device 4Rtfirmware_class_init firmware_loading_store fw_realloc_buffer _request_firmware fw_register_device fw_setup_device loop.max_part loop.max_loop nbd.debugflags nbd.max_part nbd.nbds_max cpmac_main_probe cpmac_main_event_update cpmac_main_event_notify cpphy_cppi_teardown cpphy_mdio_check_link_vitesse cpphy_adm_get_bitcombination cpphy_adm6996_get_vid_group cpphy_tantos_get_vid_group cpphy_tantos_set_default_vid cpphy_adm_set_port_vid_mapping cpphy_adm_set_default_vid adm_set_mode_pppoa adm_set_wan_keep_tagging adm_write_32 tantos_write adm_read_32 tantos_read adm_add_port_to_wan tantos_phy_access tantos_counter_access switch_dump_tantos cpphy_ar_get_vid_group cpphy_ar_set_default_vid ar_switch_port_power_on_boot_orig ar_switch_port_power_emv ar_ar8216_init display_ath_regs cpmac_register_device cpphy_entry_probe cpphy_entry_set_config macport_lru_del macport_hash_del macport_alloc ar8216_ar_work_item ar8216_ar_deinit adm_power_config cpphy_mgmt_work_del 0UEcpphy_mgmt_debug_poke cpphy_mgmt_debug_peek cpphy_mgmt_work_add cpmac_work cpphy_mgmt_process_global_power cpphy_mgmt_power_orig cpmac_puma_ioctl cpmac_puma_if_rx cpmac_puma_init cpmac_puma_mdio_lock cpmac_puma_mdio_select cpphy_switch_assign_vid cpphy_switch_status cpphy_switch_unregister_ffw_port cpphy_switch_register_ffw_port cpmac_unregister_device_vlan_change_cb cpmac_register_device_vlan_change_cb cpphy_switch_configure cpphy_switch_set_device CPGMAC_F DDC version 0.2 init_Alloc_BDs cpmacGetRxBD cpmacRxBDProc cpswHalCommonMiiMdioInit CPGMAC_F Linux DDA version 0.1 cpmac_dev_probe cpgmac_add_pid cpmac_net_get_config cpmac_ioctl avalanche_cpgmac_f.debug_mode avalanche_cpgmac_f.cfg_link_mode avalanche_cpgmac_f.cfg_link_speed cpmac_hal_tx_isr ppd_wr_l2_lut ti_ppd_delete_session ppd_get_802_3_hdr ti_ppd_modify_session ti_ppd_create_session ti_ppd_init ti_ppd_get_ses_age mtd_read_block mtd_write_block parse_mtd_partitions redboot.directory get_chip do_write_oneword do_write_buffer do_erase_oneblock do_erase_chip cfi_cmdset_0002 jedec_match block2mtd.block2mtd write_status_reg read_status_reg sfl_probe sfl_unlockall sfl_suspend sfl_write sfl_read sfl_erase sfl.sfi_mode mousedev.tap_time mousedev.yres mousedev.xres ndummy dummy i2c_avalanche.iic_base i2c_avalanche.clock i2c_avalanche.polling_mode i2c_avalanche.spike_filter wait_for_bb wait_for_pin iic_sendbytes iic_readbytes iic_init iic_xfer register_appl notify_up kernelcapi.showcapimsgs capilib_new_ncci capi_oslib.trace_mode capi_oslib.debug_mode capi_oslib.local_ec capi_oslib.dect_on capi_oslib.dect_hw capi_oslib.irq_num capi_oslib.io_addr capi_oslib_ioctl Hallo cpufreq.debug_ratelimit cpufreq.debug oprofile.timer \request_sock_%s tw_sock_%s sk_free default_device_exit netif_receive_skb 0,G%#lx inet_csk BUG: unknown timer value tcp_fin udplite4_register inet_sk_reselect_saddr 666vvvv{ tcp_cubic.tcp_friendliness tcp_cubic.bic_scale tcp_cubic.initial_ssthresh tcp_cubic.beta tcp_cubic.fast_convergence af_unix_init __ndisc_send ndisc_router_discovery ndisc_solicit ndisc_send_redirect &W@: br_sysfs_addbr ti_hil_enable_psm ti_hil_disable_psm n_mmu_ tquiet wn_boot oot> m^k uxrc thuf r thuf ild t tT.451 tlpj' Tsqu d T_ tubs xcptn T_ -miz Thoo t:ep Tboot /gnm eva_ tmtd 5_mt tVFP_ ^a$ t t^ab Tsof rqd Trcu_ am&s} t|:ep T|:ep boot tboo tboo Taud rcu_ tboot Tboot boot _boot _boot _boot _boot boot boot boot boot boot boot _boot _boot _boot _boot _boot _boot boot boot boot boot boot boot Ts>p' tks>p tmm&s} t^ab Tvfs Tvfs mt t h}fs m}fs s2_z/ pc&s tkobjec m32_ m32_ a$d' dboo mtdb _os/ _os/ gov_ gov_db gov_db Tudp4 Tudp/ pv4_mi pv4&s b4_ru 4_bee tmcfw_ Tif6 Tudpv Tudp/ Tudp/ thdr bootu k t| _"fy thr| _"fy _"fy boot PUMA5 quiet lpj' irqp boot hoos a$d' mtdp T_'u [l&s m32_ objec -miz fs3 5_mt am&s} bio4 [l&s boot fs6 io(o |:ep [l'u mm&s} aio' h}fs6 m}fs6 ize6 [l&sr be6 mtd6 dboo mtdb _os/ gov_ gov_db gov_db [l&s [l&s 4_bee mcfw_ m32_ amfs d T_ e.31170 e.31171 Tboo %quiet tbod twfd %lpj' _irq m.18396 %:ep Tv6 fns Tv %mtd %#so %#so %boo %boo %aud %irqp %irq Tboot %boot %^ab tdh n_lsm a$d' tm68k %mtdp pv4_ pv4_mi pv4&s _nfb e.22854 cu_nb s Tn Telf Telf g tw w&s[l &s[l ;s64_w ;s64_w oabi oabi oabi_ oabi oabi_ oabi gs Ts+_ T^ab Tth* _th* Ts+_ b*kpo nv t e64_64 Tk e Tb m&s[l Tappl Tappl sh~d _t@e oabi dmsg oabi oabi oabi_b oabi oabi oabi_ oabi oabi_ep oabi_ep oabi cntl64 oabi oabi oabi_l oabi gnu_m g Td a* t Ts+_ a* T boot ldrhk y Ts k Tr Tth* fd T mmdr h Tpr tk T T>k quir m T(um Tpr quir Tvpr tT.405 p?ed tkil p?ed grp T speci Tjif Tjif s T|spe Tmk| |spec T|spe Tjif |spec Tjif Tjif Tjif 64_- t Tn T|spe 64 Tn |spec &s'|of '|of irqo a$ T rq tksof ce T nt T hz_jif hz_jif hs T T_&s peek k Tp e T_ s&s} _?dl [l W s Tfl tkill tkill T tgkill T peci o Tkill "fy t Tkill Tkill Tkill Tkill g|d> boot t:ys k&nc k&nc k Tf cu_b T>:m rcu rcu_b Trcu_b Trcu_b bh Trcu_b gs Tp %s+ t l Tp am&s} dd&sfs am&sfs' g Tp p Tp g Tp g Tp t Tp g Tp t Tp t Tp Tkth Tkth* Tkth tkth Tkth Tkth Ta~o ni&s[l cvmsg dmsg fd'| 32_quo 32&s nfss ioba vm86 W vm86 Tth* |spec Tth* Thr| Thr| ns Tk Thr| Thr| thr| thr| Thr| Thr| Thr| thr| Thr| Thr| Thr| Thr| = Tk Thr| Thr| Thr| tT.274 Thr| _hr| n_wr Tsrcu_b srcu Tsrcu_* Tsrcu_* srcu n_|o~ n Td Tsrcu_ rcu_" Tsrcu_" Tsrcu_" Tsrcu_" tvm qnum bootba T|:ep t|:ep t|:ep boot| '|of ns|of y Td tjif {e tT.204 hot T ck'u ngth hz_?dl ed t 16 T 16 T 16 T s16 T s16 T 16 T 16 T n16 T +n16 s Tpr (s T _objs fcnt d&s} d&sfs' tT.427 = tk Tspr s tki Taud Taud Taud Taud Taud Taud Taud tkaud tkaud Taud Taud Taud Taud Taud Taud h Taud d Taud cv_msg Taud Taud Taud Taud Taud Taud Taud Taud Taud Taud Taud Taud ceiv IRQ_e T^ab T^ab irqs irq T irqs nd t a$ t ^a$ t sh~d Tirq _irq ed irq oi_irq irq T t@e T irq T Trcu_b Trcu_b bh Trcu Trcu_ rcu rcu_bh Trcu t t>:u be t cpos Tiov_i Tiov_i Tiov_i ce T Tiov_i Tiov_i Tsho -om tT.268 e64_64 Tspl Ts+ tT.721 tT.722 tT.723 d Tb io T a fo Twr fn t =yab hift T pdfl Tpdfl lru_ Tlru Tlru_ Tlru tT.302 Tlru_ tlru_ s2_r _lru Tks>p e Tshr tks>pd T Tp >p?d ze Tk e Tk tT.274 g}u8' t g}u8_ g}u16' t g}u1 g}u32' g}u32_ g}u64' g}u64_ x32_ u64_ u32_ rcu_ rcu_ msgrcv T msgrcv Td msgsnd T msgsnd tmsg msgmni hmdt "fy T pcns t T: t:yr t:yr t:yr t:yr t:yr rcu_^pos t:yr rcu_^pos t:yr rcu_^pos t:yr vo: t:yr T:yr T:yr _aux T:yr T:yr y T:y ey T:y tT.315 ey T _a~h: _a~h:y rcu_^pos illp illp bprm bprm ap&s ap'| apply apply bprm apply bprm' bprm bprm illp illp tl T fcntl msgsnd msgrcv T cept cept ndmsg cvmsg sh~d #n_e )d T !pos ap&s bprm apply bprm !pos fcntl ill msgsnd msgrcv cept cept ndmsg cvmsg sh~d #n_e nc':y %t@e %u32 %t@e wn_;m r Tsc tlz (s tlzo Telv_r Telv_r Telv_^p Telv_^p lv_d Telv_ Telv_l Telv Telv Telv Telv_ Telv_r Telv_r Telv_ Telv_ios %s+ Te elv_ Telv_ Telv_ Telv_ lv_rqh Telv_m Telv_m Telv_m Telv_ Telv_ios Telv Telv_ab Telv_ Telv_ elv_ Telv_ Telv_ Telv_r Telv_r _th(h plug plug T p Tp fn td Tsubm plug T {e T gs T io T o~ T xt T xt T bio T t^k xt t^k ? "f aeabi_llsl aeabi_l e ;o sw T sb T sl T aeabi_ui aeabi_i aeabi_ui aeabi_i aeabi_llsr lshr mcpy aeabi_lm 3 T_ 1 T_ 2 T_ 4 T_ Tsha_ Tsha_ aeabi_ w_abo w_abov w_abo tkobj_ tkobj_ obj_ Tkobjec Tkobjec Tkobjec tkobj Tkobjec tkobjec Tkobjec tkobjec tkobjec tkobjec Tkobjec Tkobjec Tkobjec Tkobjec Tkobjec Tkobjec Tkobjec Tkobjec Tkobjec Tkobjec _t@e ? shift !rcu n_wr Ti T sb t m11' m11_ m11_ rm11 rmv6 rmv6 n Tk Tdlci_i /ght cvmsg cvmsg dmsg dmsg dmsg cv_| :t Ts cept Ts cvmsg T cv T cept4 cept im Ts d Ts cept Ts tl Ts dmsg cvmsg cvmsg aps Ts n_obso bs^m ceiv sum' ll T rcsum cksum T cksum cksum cmsg T_ n_{e n_{e _eg( _eg( _eg( _eg( cvho cvho gif#f ? rx irq T byhwt@e byhwt@e nc T byhw nc T ceiv r\ni cksu mtu T Teth-o Teth-o Teth-o Teth-o t\hw Teth-o Teth-o Teth-o Teth-o Teth-o Teth-o Teth-o Teth-o Teth-o eth- th-o eth- mc&nc ms t ms T pp ds>p plug }}t@e x.25568 dkt@ dkt@ }t@e p(su s.17107 .17123 t@e d }t@e !}t@e a$ d %who ^k Dw s dp }}t@e g}}t@e }t@e x dd dsqu h}}t@e dsqu dsqu Dsqu dsqu dsqu m}}t@e ot}}t@e s2_r s2_z/ s df }t@e }t@e }t@e d s.17608 pcns dmq&s }t@e x dmsg x dmq&s dmq&s x:ys x:ys d:yr D:y&s ] Dcr@ m Dcr@- Dcr@ dcr@ lv_l lv&s}] D }] d t@e t@e Dkobj&s}] n.12173 sc d sc dwr s df ] dr th(h th(h th(h d th(h th(h mios N_TTY t dpt dpty $ dpt ] dv dkbd D:ybo f.19082 mkso Dkbd&sr |o~ D d#so d#so t.19262 Dshif Dshif s D: D_&sr a$d d SAK_ rq&n f] dt dTFFS_mt numb dTFFS_mt numb DT_In f] D spee ddsl dvdsl peed peed &s}] d dkt@ dkt@ }] d t dd kt@e &s}] dcl t@e dcl s&s}] Dpl %pos %|o~ dfw_ dnbd mcfw_ cDDCIn f cDDCDe mSeed dcp 4byt DMDIO o dg s dp s dmtd dboo dcmd dmtdb t dc _amd dsfl2_mt .13252 ds25fl004a_ ds25fl008a_ ds25fl016a_ ds25fl032a_ ds25fl064a_ ds25fl128 dm25fl128 dm25fl64 dmx25l1605_ dmx25l3205_ dmx25l6405_ dmx25l12805_ dw25q64bv_ dw25q128bv_ s Ds .12468 .12219 ddyn_ .12362 %phys iq d %abs %msc %snd mi\l t Di2 s d`mm go dd nufaktu r D, appl appl _os/ dt\> _os/ _os/ d^ab dkt@ }] d ds[ peed gov_ gov_ x ddb th(h k ddb ddbs th(h n_th(h ie d > s)d ze d }t@e }t@e ddlci_i x&n_b x dds dds ] d= m.19835 dwi s dwi %r\by %t\by %r\dr %t\dr %r\ov %r\m %t\ab %t\) tbea %t\w %cr@t dllc Dllc t@e.24160 q^c dp dq^c ~o?d .30735 ] Db ] Dp famil .29959 h dn mtu_ numb pv4_ds .39174 pv4_ds pv4_ vmss pv4_ th(h _|o~ p&n_ peci _] d `dp4_ `dp4 Dudp t Dudpl `dpl `dp/ `dp/ `dp/ pv4_ pv4_ dflt d famil \msf pv4_ pv4_ b4_ru 4_bee l4_mu dcub 4_ds dmcfwg amil rnum.30033 dgc amil .34666 r#f&s dflt dn^ ] dn^ `dpv6 `dpv6 `dp6 o Dudpv6 t `dp/ `dp/ `dp/ `dp/ Dudp/ dmld2_ \msf peci dtlvp d=hd dtlvp pv6&s udp/ famil eth-o dbrp dbrp s Dbrp dbrp dbrp dbrp dbrp dbrp dbrp dbrp dbrp dbrp dbrp dbrp dbrp ssa a dbrp dbrp dbrp %)ll %)ll h dfak dbrn dbrn pppo dbrnf dbrnf dbrnf dbrnf dbrn dhil _|o~ _udp _|o~ t.11666 t.11576 BROOT_DEV bcrc nt bcr bhuf Blpj Bir bth* Bth* Belf hw,p Beva_ _t@e .13726 be bs%p Bpg mmu_g bai_ bai_h bai_dw bai_w bai&s bai bai_ bai_m t bc55_ bc55 m.18480 t.18250 .18249 5_bo dt@e bdd .16351 t@e.16352 ize b {e.18481 mtd B 5_?d bapl bclk bgpl btdmc bdpl s bvlynqc ce.21269 Bu hw0_ 4PALNumIn 4PALObje 4PvtIn vlyn bpsc bps BVFP_ s Bp yield p Bv ey.32861 Bmml .12372 b f.12305 b f.12259 k Bp B#so g&nc b#so b#so b#so b#so g(s b .22316 B#so e Bc tz bsof Birq d.19822 d.19827 d.19872 d.19777 d.19782 d.16103 .16104 bmsg t.27495 d.20400 d.20411 bboo e.22855 Bboo bk)lp nt.21283 msg.21284 hift brcu_b brcu_b rcu_b ized bkth Bkth .11868 d.16412 ey.11087 ey.11955 hift b|:ep B|:ep d bnt ngth boot d.12586 iod B .13093 x.11253 Bvm ize Bvm .30835 baud baud baud baud baud ized Baud Baud Baud baud baud msg.30007 baud baud s.29959 ck.29958 bkaud Baud Baud Baud $ bk ized ba s birq birq nd b rcu_ rcu_b bboot fn Bm _oom ^a$d o bvm d.24833 s.24414 =ya$ pdfl jifs lru_ lru_ ey.15681 Bnum Bvml ot bv nr bva.18723 ized bs>p Bvml _mm bg x.17814 ey.25235 ey.25236 ey.25237 ey.25238 ey.25239 ey.25240 .25233 s Bc Bsui mnt bfa hift bi_h hift bi_h .22281 i].21735 f].21736 ey.21740 ey.21741 a].21734 .22140 ey.21801 s b ey.21452 ey.14537 ey.17714 Bvfs bmsg t.26161 d.24049 d.24431 bbio B}bio' bbio p Bb ey.20923 ey.14976 ey.16720 ey.16721 bpsw bpwq ey.18406 !mnt a Bp l^c bp ey.15406 ey.14704 ey.14824 g}mn mnt b bsqu ey.19841 ey.19842 ey.19843 ey.19233 ey.16652 ey.16688 ey.16723 ey.16743 ey.18513 ey.18582 ey.18583 bn.15768 p bf #n_l ey.18897 bf ey.20058 p bmq&s ey.17459 ey.17580 B:y b:yr ] Bm d.19023 d.19105 d.20758 ey.20364 ey.21237 d.20122 bp.21458 ey.21528 qnum ey.6336 e.3391 bb ngth $ngth ey.19081 .18038 th(h b ey.21892 b#so ey.21504 ey.21506 ey.21507 l^cs ey.14939 bpty bpty bptmx bptmx bpt ey.16122 ey.18942 Bshif bshif n Bv b:ybo d.19680 ds.19679 g.19699 =.19700 d.19698 B#so bsof B#so b#_d $ Bkms B#sw fg b d.19263 dy.19265 dx.19264 ey.22138 B#so bvc0 r.20988 f Bf ey.14364 ey.15902 t bt z_Bu .15218 bTFFS_G x BTFFS_mtd Bt bTFFS_G BTFFS_C BTFFS_Nam o Bt ized.16171 .15239 boot DbgH .23278 bfp.23318 .23316 s.23317 ey.19508 BAVM_WATCHDOG_ BAVM_WATCHDOG_ mwdt ey.19104 ey.30791 bPwC/ tAnk ey.26314 b`mmy.18501 ey.18867 kobj ey.12648 ey.11941 ey.12666 t bp shift ey.22552 ey.32507 mcfw_ mcfw mcfw_ mcfw_ Bcp iv_{ iv_{ ngth cDDCIn cDDCObje cDDCNumIn bBD_Ca bBD_Ca bBD_Ca bBD_Ca ed.21440 bBD_Ca nce.28262 peed bcpg k32_l k Bg cfg Bg boot .15150 f.15223 f.15231 f.15246 f.15257 bcmd bcmd bmtd ey.17754 ey.21379 bmtd ey.14866 .13055 ey.20852 2mtd e bsfl Bsfl ey.12531 ey.18151 .17907 ey.15705 ey.17843 ey.16699 ey.12924 ey.12925 ey.13446 bi2 ey.16038 ey.17112 _appl s bs+, msgs BApplDa ey.22853 BMaxApplDa .3963 BReg Sh~d BDummyN _os/ _os/ g.12233 _os/ BCA_TIMER_Anz BCA_TIMERS .11873 t.11874 Appl MaxAppls BCAPI_V .11277 Recei _os/ _os/ _os/ _os/ _os/ _os/ _os/ t btxou bCAP_Da _os/ _os/b ey.16886 B, _os/ _os/ bO.15620 .15621 ey.14131 bc > s)d g bo birqs bs mnt b fami/ bdlci_i d.32577 mm.37382 d.37381 d.37342 {e b cvho cvho bgif# bpt@ bpt@ d.36072 ized hrnd hift w_lwm w_hwm ey.30195 Bllc _?dl bsap d.26620 bq^ ey.29856 bn bfamil x.29240 s Bp gc.39175 bequi/b um.39177 .39176 .38923 .39410 t.32356 rfc1337 B d.34956 w_v4_h Budpl bfn_ bfn_h bmfc xvif $ bmf n Bm :t bm l4_?dl l64_?dl agnl bcub s[e bcub bmcso .34735 b`mmy.36132 bysrc b q.35613 ey.29981 /ght bg gs b mm.34355 d.34356 v6msg ty.31812 ey.32378 bbrnf&s t.33464 _hil Bppsub Bpds t.36343 xfrm rite inet_ rele unregister_ register queue_ _set_ roc_ init_ noti _set devic time read alloc che_ tion ate_ _sta dev_ lock register_ get_ init registe iste r__kstrtab_ trtab_ r__ksymtab_ ymtab_ r__ks tab_ Ycalling %pF @ %i initcall %pF returned %d after %Ld usecs error code %d preemption imbalance disabled interrupts initcall %pF returned with %s /dev/console <4>Warning: unable to open an initial console. <4>Failed to execute %s <4>Failed to execute %s. Attempting defaults... trying /sbin/init /sbin/init trying /etc/init /etc/init trying /bin/init /bin/init trying /bin/sh /bin/sh No init found. Try passing init= option to kernel. kernel_init: started kernel_init: kernel locked kernel_init: basic setup done kernel_init: ended init/main.c <4>Parameter %s is obsolete, ignored <3>Unknown boot option `%s': ignoring Too many boot env vars at `%s' Too many boot init vars at `%s' early options <5>Kernel command line: %s Booting kernel <4>start_kernel(): bug: interrupts were enabled *very* early, fixing it start_kernel(): bug: interrupts were enabled early <2>initrd overwritten (0x%08lx < 0x%08lx) - disabling it. earlycon <4>Malformed early option '%s' HOME=/ TERM=linux readonly VFS: Mounted root (%s filesystem)%s. VFS: Cannot open root device "%s" or %s Please append a correct "root=" boot option; here are the available partitions: VFS: Unable to mount root fs on %s List of all partitions: No filesystem could mount root, tried: /dev/root /dev/ %u:%u <6>Waiting %dsec before mounting root device... <6>Waiting for root device %s... /dev/ram /initrd.image linuxrc broken padding junk in compressed archive can't allocate link hash entry TRAILER!!! can't allocate dir_entry buffer 070707 incorrect cpio method used: use -H newc option 070701 no cpio magic incomplete literal tree incomplete distance tree can't allocate buffers bad gzip magic numbers internal error, invalid method Input is encrypted Multi part input Input has invalid flags invalid compressed format (err=1) invalid compressed format (err=2) out of memory out of input data invalid compressed format (other) crc error length error junk in gzipped archive <6>Unpacking initramfs... <6>Calibrating delay loop (skipped) preset value.. <6>Calibrating delay loop (skipped), value calculated using timer frequency.. <6>Calibrating delay loop... %lu.%02lu BogoMIPS (lpj=%lu) <4>Warning: bad configuration page, trying to continue <7>Converting old-style param struct to taglist <3>Trying to set irq flags for IRQ%d CPU%d %10s %3d: %10u %s Err: %10lu thread_info arch/arm/kernel/process.c [%s] task struct not aligned 0x%p CPU: %d %s (%s %.*s) PC is at %s LR is at %s pc : [<%08lx>] lr : [<%08lx>] psr: %08lx sp : %08lx ip : %08lx fp : %08lx r10: %08lx r9 : %08lx r8 : %08lx r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s Table: %08x DAC: %08x Control: %08x%s Pid: %d, comm: %20s Reboot failed -- System halted USER_26 FIQ_26 IRQ_26 SVC_26 UK4_26 UK5_26 UK6_26 UK7_26 UK8_26 UK9_26 UK10_26 UK11_26 UK12_26 UK13_26 UK14_26 UK15_26 USER_32 FIQ_32 IRQ_32 SVC_32 UK4_32 UK5_32 UK6_32 ABT_32 UK8_32 UK9_32 UK10_32 UND_32 UK12_32 UK13_32 UK14_32 SYS_32 Thumb Jazelle ThumbEE ptrace_cancel_bpt: bogus nsaved: %d! <3>%s:%d: corrupted Thumb breakpoint at 0x%08lx (0x%04x) <3>%s:%d: corrupted ARM breakpoint at 0x%08lx (0x%08x) <3>ptrace: too many breakpoints <4>ptrace: can't handle thumb mode <4>Ignoring memory bank 0x%08x size %dKB Processor : %s rev %d (%s) BogoMIPS : %lu.%02lu Features : CPU implementer : 0x%02x CPU architecture: %s CPU part : %07x CPU variant : 0x%02x CPU variant : 0x%x CPU part : 0x%03x CPU revision : %d Hardware : %s Revision : %04x Serial : %08x%08x arch/arm/kernel/setup.c annex annex: %s CPU configuration botched (ID %08x), unable to continue. CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx %s%c VIPT aliasing VIPT nonaliasing VIVT ASID tagged CPU: %s data cache, %s instruction cache Machine configuration botched (nr %d), unable to continue. Machine: %s System RAM <4>Ignoring unrecognised tag 0x%08x mem= half thumb 26bit fastmult edsp java iwmmxt crunch undefined/unknown 5TEJ 6TEJ ?(11) ?(12) ?(13) ?(14) ?(15) ?(16) ?(17) Video RAM Kernel text Kernel data %s(0x%08lx to 0x%08lx) %04lx: %08x Code: %0*x (%0*x) bad PC value. Hmm. Unexpected FIQ received, but trying to continue You may have a hardware problem... %s:%d: bad pte %08lx. %s:%d: bad pmd %08lx. %s:%d: bad pgd %08lx. <2>kernel BUG at %s:%d! arch/arm/kernel/traps.c %s called, but not implemented xchg: bad data size: pc 0x%p, ptr 0x%p, size %d Internal error: %s: %x [#%d] PREEMPT Process %s (pid: %d, stack limit = 0x%p) false true Mode: %s in_interrupt: %s Stack: Backtrace: no frame pointer invalid frame pointer 0x%08x frame pointer underflow Fatal exception in interrupt Fatal exception <2>Bad mode in %s handler detected Oops - bad mode <3>[%d] %s: bad data abort: code %d instr 0x%08lx unknown data abort code <3>[%d] %s: obsolete system call %08x. Oops - bad syscall branch through zero [%d] %s: arm syscall %d Oops - bad syscall(2) <6>%s (%d): undefined instruction: pc=%p Oops - undefined instruction Division by zero in kernel. (%s) from [<%08lx>] Exception stack prefetch abort data abort address exception fp_send_sig fp_printk kern_fp_enter <3>%s: bad relocation, section %d reloc %d <3>%s: out of bounds relocation, section %d reloc %d offset %d size %d <3>%s: relocation out of range, section %d reloc %d sym '%s' <3>%s: unknown relocation: %u <3>module %s: ADD RELOCATION unsupported <6>Bye! kretprobe BUG!: Processing kretprobe %p @ %p include/linux/kprobes.h current sp %lx does not match saved sp %lx Saved registers for jprobe %p Current registers arch/arm/kernel/kprobes.c <6>No ATAGs? arch/arm/kernel/atags.c atags <3>Exporting ATAGs: not enough memory <3>%s: no pmd tables arch/arm/mm/dma-mapping.c <3>%s: no pte tables /home/jpluschke/FBox/0-branches/Version_17962_GUREL_ProdFix1/RELEASE_KERNEL_arm1176_build/kernel/linux-2.6.28/arch/arm/include/asm/dma-mapping.h <3>%s: freeing wrong coherent size (%ld != %d) <2>%s: bad page in kernel page table <3>%s: trying to free invalid coherent area: %p <3>%s: not initialised <4>%s %s: coherent DMA mask is unset <4>%s %s: coherent DMA mask %#llx is smaller than system GFP_DMA mask %#llx <4>coherent allocation too big (requested %#x mask %#llx) <1>pgd = %p <1>[%08lx] *pgd=%08lx (bad) , *pte=%08lx , *ppte=%08lx <7>%s: unhandled page fault (%d) at 0x%08lx, code 0x%03x paging request NULL pointer dereference <1>Unable to handle kernel %s at virtual address %08lx Oops arch/arm/mm/fault.c VM: killing process %s <1>Unhandled fault: %s (0x%03x) at 0x%08lx vector exception alignment exception terminal exception external abort on linefetch section translation fault page translation fault external abort on non-linefetch section domain fault page domain fault external abort on translation section permission fault page permission fault unknown 16 unknown 17 unknown 18 unknown 19 lock abort unknown 21 imprecise external abort unknown 23 dcache parity error unknown 25 unknown 26 unknown 27 unknown 28 unknown 29 unknown 30 unknown 31 <4>ATAG_INITRD is deprecated; please update your bootloader. <6>Freeing %s memory: %dK initrd <3>MEM: unordered memory banks. Not freeing memmap. <6>Memory: %ldMB = %luMB total <5>Memory: %luKB available (%dK code, %dK data, %dK init) <3>INITRD: 0x%08lx+0x%08lx extends beyond physical memory - disabling initrd arch/arm/mm/init.c <3>INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd Mem-info: %d pages of RAM %d free pages %d reserved pages %d slab pages %d pages shared %d pages swap cached initrd= <6>CPU: Testing write buffer coherency: unable to grab page unable to map memory enabling work-around failed, %s arch/arm/mm/fault-armv.c arch/arm/mm/ioremap.c <2>remap_area_pte: page already exists arch/arm/mm/pgd.c <3>ERROR: unknown or unsupported cache policy <4>Only cachepolicy=writeback supported on ARMv6 and later buffered <4>nocache is deprecated; use cachepolicy=%s uncached <4>nowb is deprecated; use cachepolicy=%s <4>vmalloc area too small, limiting to %luMB <4>BUG: not creating mapping for 0x%08llx at 0x%08lx in user region <4>BUG: mapping for 0x%08llx at 0x%08lx overlaps vmalloc space Create 36bit mapping <3>MM: CPU does not support supersection mapping for 0x%08llx at 0x%08lx <3>MM: invalid domain in supersection mapping for 0x%08llx at 0x%08lx <3>MM: cannot create mapping for 0x%08llx at 0x%08lx invalid alignment <4>BUG: map for 0x%08lx at 0x%08lx can not be mapped using pages, ignoring. Memory policy: ECC %sabled, Data cache %s <5>Ignoring RAM at %.8lx-%.8lx (vmalloc region overlap). <5>Truncating RAM at %.8lx-%.8lx to -%.8lx (vmalloc region overlap). arch/arm/mm/mmu.c vmalloc= ecc= nowb nocache cachepolicy= alignment <3>Alignment trap: not handling swp instruction <3>Alignment trap: not handling instruction %0*lx at [<%08lx>] Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx Address=0x%08lx FSR 0x%03x <3>LDMSTM: PC = %08lx, instr = %08lx, addr = %08lx, eaddr = %08lx <3>Alignment trap: not handling ldm with s-bit set User: %lu System: %lu Skipped: %lu Half: %lu DWord: %lu Multi: %lu User faults: %i (%s) fixup fixup+warn signal signal+warn <3>[%s] base_address oder usec 0 <3>[%s] Error: Mode AUTOLOAD oder ONESHOT wird benoetigt <3>[%s] input argument speed out of range bank[%d] start %lx size %lx node %x [c55] c55_mem_start = 0x%x c55 text -PM5- <3>[%s] write failed 0x%x (written) <> 0x%x (read) %s: enable cycle_count performance-monitor-register: %x <3>%s: can't register clocksource! <3>[%s] Warning: (scale_timer2 < scale_timer0) => NoHz-Timer might exceed clocksource-cycle <6> Puma5 Timer0 and HRES Timer2 initialized puma5 Puma5 Timer Tick cs_puma ce_puma Power & Sleep Controller @ 0x%08x Initialized [id-0x%08x] Power & Sleep Controller @ 0x%08x Initialization failed USB PHY POR Bypass enabled %s:USB clock set failed %s:GMII Clock set failed Initialized Peripheral Port Remap Register to base : 0x%08x avalanche/ddr_state avalanche/ddr_state_verbose avalanche/ddr_sync_state avalanche/arm_state Async Normal Self refresh Disabled Enabled Power state: %s (%d) DDR ASYNCH refresh: %s PUMA5 [%s](%u): PLATRAM_RO [%s](%u): PLATRAM_RW [%s](%u): eraseblocksize=0x10000 [%s](%u): name=%s pos=0x%Lx value2=0x%x [%s](%u): eraseblocksize=0x20000 [%s](%u): [puma5_mtd_rm_notifier] ignore %s [%s](%u): [mtdram_setup] str="%s" [%s](%u): mtdram1 %s [%s](%u): mtdram1 0x%08x - 0x%08x filesystem_ram unused_ram extra_ram <3>[%s] line %d strcmp(%pF, %pF) [%s](%u): mtd_info->name=%s, mtd_info->index=%u, param=%lu, p_mtd_pat=0x%p ram-filesystem macronix [%s](%u): Detected macronix [%s](%u): with unknown mtd type %s [%s](%u): *p_mtd_pat->name %s [%s](%u): MAP_FLASH [%s](%u): MAP_RAM [%s](%u): [mtd%d] %20s: 0x%08x - 0x%08x (size 0x%x) [%s](%u): try partition=%s (offset=0x%x, len=%x, blocksize=%x) filesystem_reserved kernel_ram kernel_reserved <3>use partition %d (%s) for jffs2 jffs2_size <3>[%s] jffs2_size not set. <4>[%s]: not enough space for JFFS2! <4>[%s]: limiting jffs2_size to %d <4>[%s]: jffs2_size too small, use %d <3>[%s] JFFS2 size changed, erase old filesystem <3>jffs mtd erase failed %d [%s](%u): magic found @pos 0x%x [%s](%u): name %s [%s](%u): found %s [%s](%u): use %s /dev/mtdblock%d [%s](%u): root device: %s (%s) [%s](%u): %s is not my root device ram-jffs2 [%s](%u): %s: set erasesize to 0x%x tffs (1) [%s](%u): tffs (1) on Index %d tffs (2) [%s](%u): skip %s urlader [%s](%u): set puma5_urlader_mtd [%s](%u): linux_fs_start [%s](%u): linux_fs_start %d mtd0 mtd1 mtd2 mtd3 mtd4 [%s](%u): mtd[%u] = %s [%s](%u): mtd[%u] = 0x%08x - 0x%08x extra jffs2_reserved extra_reserved [%s](%u): mtd%d: %20s: 0x%08x - 0x%08x (size 0x%x) config-space [%s](%u): special mtd_parser registered mtd-ram find_squashfs <3>pll_div_%d_reg=%#x at %#x [%s] setting new divisor to %d <3>[%s] gostat %#x <3>[%s] wating for clock transistion to finish %#x <3>[%s] go_set now GMII ti_spi Writing %#x %s(%d): Error - APDSP firmware not responding! %s(%d):return code 0x%02x %s: Run PP PDSPs %s: Disable prefetcher PSM mode %s: Disable PPD PSM mode %s: Enable PPD PSM mode %s: Enable prefetcher PSM mode %s: Halt PP PDSPs avalanche_ppd_deinit: CPPI41 Library NOT initialized. %s: infra channel setup failed for channel %d Error: Failed to initialize the PP Subsystem avalanche_ppd_init: PP system initialized successfully. avalanche_ppd_init: CPPI41 Library NOT initialized. PAL_cppi4BufPoolInit for pool %d FAILED. Embedded descriptor region allocation FAILED. Host descriptor region allocation FAILED. <3>[%s] Registering Puma Cpu-Freq-Driver <3>[%s] cpufreq_frequency_table_target returned tab_index=%d <3>[%s] setting frequency to %d clocks <3>puma_set_clock: unknown id=%d <3>puma_get_clock: unknown id=%d Clocks: CPU: %u %cHz SYSTEM: %u %cHz USB: %u %cHz DOCSIS: %u %cHz GMII: %u %cHz VLYNQ/VBUS: %u %cHz SFLASH: %u %cHz TDM: %u %cHz [puma_gpio_init] [GPIO] invallid gpio pin %d [GPIO] invalid gpio pin %d [%s] ERROR: no mem %d <3>[%s] ERROR: no configbuffer <3>[%s] ERROR: unknown ConfigVersion 0x%x <3>ERROR: Type unknown <3>ERROR: no Config found ERROR: Could not open file %s ERROR: no mem 0x%p ERROR: no mem ERROR: write Config ERROR: read Config WLAN WLAN2 DECT DOCSIS ZERTIFIKATE WLAN DECT WLAN2 ZERTIFIKATE DOCSIS Texas Instruments Cable SoC avalanche avalanche/base_psp_version Linux OS version %s Avalanche SOC Version: 0x%x operating in %s mode Cpu Frequency: %u MHZ System Bus frequency: %u MHZ BasePSP 9.2.1.6 Patch cached, write back %s: icrstar %08lx %08lx %08lx icestar %08lx %08lx %08lx pol %08lx %08lx %08lx typ %08lx %08lx %08lx icglber %lx avalanche/developers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ India Kernel Development Team (2007-) Mansoor - BasePort Srinath/Mansoor - Intc/Intd Hemant - Ethernet Sekhar - CPPI Srinath - I2C AVALANCHE_INTC_BASE: %x Interrupt controller revision : %x [INTC Primary] [INTC Secondary] %s : There is a room for %d more descriptors Off chip memory allocated: %d QMgr Init: buffer after alignment: %p nwfpe <4>NetWinder Floating Point Emulator V0.97 (extended precision) <7>NWFPE: %s[%d] takes exception %08x at %p from %08lx <6>VFP support v0.3: no double precision support implementor %02x architecture %d part %02x variant %x rev %x <3>VFP: Error: %s unhandled bounce <3>VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x <3>VFP: s%2u: 0x%08x s%2u: 0x%08x <6>VFP: bad FP values in %s <4>VFP: estimate_sqrt: invalid significand fnmsc fnmac fmsc fmac fcvtd fsub fnmul fadd fmul fdiv fsito fuito fsqrt kernel/sched.c kernel/sched_rt.c <6>%-13.13s %c running %08lx %5lu %5d %6d <3>BUG: scheduling while atomic: %s/%d/0x%08x <3>bad: scheduling from the idle thread! <6> task PC stack pid father sighand_cache signal_cache files_cache fs_cache vm_area_struct mm_struct task_struct &mm->mmap_sem kernel/fork.c <6>fork(): process `%s' used deprecated clone flags 0x%lx %d-%d %-16s [%s] execdomains personality-%ld Linux <4>---[ end trace %016llx ]--- <4>------------[ cut here ]------------ <4>WARNING: at %s:%d %s() Tainted: Not tainted <0>Kernel panic - not syncing: %s <0>Rebooting in %d seconds.. <6>debug: ignoring loglevel setting. <4>log_buf_len: allocation failed <5>log_buf_len: %d kernel/printk.c [%5lu.%06lu] <6>turn off boot console %s%d <6>console handover: boot [%s%d] -> real [%s%d] <6>console [%s%d] enabled <0>%s Suspending console(s) (use no_console_suspend to debug) ttyS kernel/exit.c include/linux/ptrace.h Aiee, killing interrupt handler! Attempted to kill the idle task! <1>Fixing recursive fault but reboot is needed! <6>note: %s[%d] exited with preempt_count %d Attempted to kill init! include/linux/pid_namespace.h ksoftirqd/%d kernel/softirq.c <3>huh, entered tasklet %p (%s)with preempt_count %08x, exited with %08x? Attempt to kill tasklet from interrupt <3>huh, entered softirq %td %p (%s)with preempt_count %08x, exited with %08x? <3>[resource-tree] <3>%d:%s[%s] (0x%x - 0x%x) <3>[request_resource] %s: end 0x%x < start 0x%x <3>[request_resource] %s: start 0x%x < root->start 0x%x <3>[request_resource] %s: end 0x%x > root->end 0x%x %*s%0*llx-%0*llx : %s <4>resource map sanity check conflict: 0x%llx 0x%llx 0x%llx 0x%llx %s Expanded resource %s due to conflict with %s ioports iomem gpio <4>Trying to free nonexistent resource <%016llx-%016llx> kernel/resource.c check-region PCI IO PCI mem SFLASH NAND %s%lu kernel/sysctl.c <6>warning: process `%s' used the deprecated sysctl system call with sched_rt_period_us sched_rt_runtime_us sched_compat_yield panic core_uses_pid core_pattern real-root-dev print-fatal-signals ctrl-alt-del modprobe hotplug sysrq cad_pid threads-max overflowuid overflowgid pid_max panic_on_oops printk_ratelimit printk_ratelimit_burst ngroups_max randomize_va_space max_lock_depth poweroff_cmd scan_unevictable_pages overcommit_memory panic_on_oom oom_kill_allocating_task oom_dump_tasks overcommit_ratio page-cluster dirty_background_ratio dirty_ratio dirty_writeback_centisecs dirty_expire_centisecs nr_pdflush_threads swappiness lowmem_reserve_ratio drop_caches min_free_kbytes percpu_pagelist_fraction max_map_count laptop_mode block_dump vfs_cache_pressure mmap_min_addr inode-nr inode-state file-nr file-max nr_open dentry-state leases-enable lease-break-time aio-nr aio-max-nr inotify epoll suid_dumpable <6>warning: `%s' uses 32-bit capabilities (legacy support in use) <6>warning: `%s' uses deprecated v2 capabilities in a way that may be insecure. kernel/ptrace.c kernel/timer.c <3>huh, entered %p with preempt_count %08x, exited with %08x? <3>schedule_timeout: wrong timeout value %lx uid_cache sigqueue kernel/signal.c %s/%d: potentially unexpected fatal signal %d. kernel/sys.c <0>Power down. <4>%s failed to allocate memory for "%s" <4>Failed to start orderly shutdown: forcing the issue <0>System halted. <0>Restarting system. <0>Restarting system with command '%s'. PATH=/sbin:/bin:/usr/sbin:/usr/bin khelper kernel/kmod.c <3>request_module: runaway loop modprobe %s PATH=/sbin:/usr/sbin:/bin:/usr/bin kernel/workqueue.c %s: recursion depth exceeded: %d <3>BUG: workqueue leaked lock or atomic: %s/0x%08x/%d <3> last function: %s/%d include/linux/timer.h PID hash table entries: %d (order: %d, %Zd bytes) Could not alloc pidhash! kernel/rcupdate.c <4>parse_args(): option '%s' enabled irq's! <3>%s: Unknown parameter `%s' <3>%s: `%s' too large for parameter `%s' <3>%s: `%s' invalid for parameter `%s' kernel/params.c parameters <4>%s (%d): error creating kset <3>Module '%s' failed add to sysfs, error number %d <3>The system will be unstable now. <3>%s: missing param set value <3>%s: string doesn't fit in %u chars. <3>%s: string parameter expected <3>%s: string parameter too long <3>%s: expects arguments <3>%s: can only take %i arguments <3>%s: needs at least %i arguments POSIX clock register failed for clock_id %d posix_timers_cache kthreadd kernel/kfifo.c kernel/posix-cpu-timers.c <6>RT Watchdog Timeout: %s[%d] kernel/hrtimer.c <4>Could not switch to high resolution mode on CPU %d Switched to high resolution mode on CPU %d nsproxy kernel/srcu.c &sp->mutex &nh->mutex kernel/notifier.c %lx %x uevent_seqnum uevent_helper profiling kexec_loaded kexec_crash_loaded vmcoreinfo <3>pm_qos_param: cpu_dma_latency setup failed <3>pm_qos_param: network_latency setup failed <3>pm_qos_param: network_throughput setup failed process_%d cpu_dma_latency network_latency network_throughput prof_cpu_mask kernel/profile.c <4>kernel sleep profiling requires CONFIG_SCHEDSTATS <6>kernel schedule profiling enabled (shift: %ld) <6>kernel KVM profiling enabled (shift: %ld) <6>kernel profiling enabled (shift: %ld) kernel/time/timekeeping.c timekeeping <5>Clock: inserting leap second 23:59:60 UTC <5>Clock: deleting leap second 23:59:59 UTC pmtmr Warning: clock=pmtmr is deprecated. Use clocksource=acpi_pm. acpi_pm Warning! clock= boot option is deprecated. Use clocksource=xyz current_clocksource available_clocksource <%p> Timer List Version: v0.4 HRTIMER_MAX_CLOCK_BASES: %d now at %Ld nsecs cpu: %d clock %d: .base: %p .index: %d .resolution: %Lu nsecs .get_time: .offset: %Lu nsecs active timers: #%d: , S:%02lx # expires at %Lu-%Lu nsecs [in %Ld to %Ld nsecs] .%-15s: %Lu nsecs expires_next .%-15s: %Lu hres_active nr_events nohz_mode idle_tick tick_stopped idle_jiffies idle_calls idle_sleeps idle_entrytime idle_waketime idle_exittime idle_sleeptime last_jiffies next_jiffies idle_expires jiffies: %Lu Tick Device: mode: %d Per CPU device: %d Clock Event Device: max_delta_ns: %lu min_delta_ns: %lu mult: %lu shift: %d mode: %d next_event: %Ld nsecs set_next_event: set_mode: event_handler: timer_list kernel/time/clockevents.c <6>Clockevents: could not switch to one-shot mode: no tick device %s is not functional. %s does not support one-shot mode. <4>CE: %s increasing min_delta_ns to %lu nsec <6>Switched to NOHz mode on CPU #%d <3>NOHZ: local_softirq_pending %02x kernel/futex.c <3>futex_lock_pi: ret = %d pi-mutex: %p pi-state %p kernel/rtmutex_common.h kernel/rtmutex.c <4>Maximum lock depth %d reached task: %s (%d) %s %u %u [permanent], Unloading Live Loading 0x%p modules Modules linked in: %s%s [last unloaded: %s] <3>Symbol %s can not be used by a non-GPL module <4>Symbol %s is being used by a non-GPL module, which will not be allowed in the future <4>Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details. <4>Symbol %s is marked as UNUSED, however this module is using it. <4>This symbol will go away in the future. <4>Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. <3>%s: module sysfs not initialized <3>%s: module is already loaded holders kernel/module.c .gnu.linkonce.this_module <4>No module found in object <4>%s: module has no symbols (stripped?) __versions .modinfo vermagic <3>%s: version magic '%s' should be '%s' staging <4>%s: module is from the staging directory, the quality is unknown, you have been warned. .init license unspecified GPL v2 GPL and additional rights Dual BSD/GPL Dual MIT/GPL Dual MPL/GPL <4>%s: module license '%s' taints kernel. ndiswrapper driverloader %s: please compile with -fno-common %s: gave up waiting for init of module %s. %s: out of memory loading <4>%s: Unknown symbol %s (%ld) __param __ksymtab __kcrctab __ksymtab_gpl __kcrctab_gpl __ksymtab_gpl_future __kcrctab_gpl_future __ksymtab_unused __kcrctab_unused __ksymtab_unused_gpl __kcrctab_unused_gpl __markers <3>%s: exports duplicate symbol %s (owned by %s) .debug __verbose __mcount_loc __obsparm <4>%s: Ignoring obsolete parameters sections <3>Module len %lu truncated __ex_table <4>%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention <4>%s: loading module anyway... live coming going srcversion initstate refcnt %0*lx %c %s [%s] %0*lx %c %s kallsyms kernel/kallsyms.c <6>Process accounting paused <6>Process accounting resumed Kexec: Memory allocation for saving cpu register states failed <0>Starting new kernel OSRELEASE=%s PAGESIZE=%ld SYMBOL(%s)=%lx init_uts_ns node_online_map swapper_pg_dir _stext vmlist contig_page_data SIZE(%s)=%lu page pglist_data zone list_head nodemask_t OFFSET(%s.%s)=%lu node_zones nr_zones node_mem_map node_start_pfn node_spanned_pages node_id vm_stat prev vm_struct LENGTH(%s)=%lu zone.free_area free_area.free_list NUMBER(%s)=%ld NR_FREE_PAGES PG_lru PG_private PG_swapcache CRASHTIME=%ld VMCOREINFO kernel/kexec.c crashkernel= <4>crashkernel: Memory value expected <4>crashkernel: '-' expected <4>crashkernel: end <= start <4>crashkernel: ':' expected <4>Memory value expected <4>crashkernel: invalid size <4>Memory value expected after '@' <4>crashkernel: memory value expected CORE <3>Could not allocate control_code_buffer <3>Could not allocate swap buffer Crash kernel disabled <6>audit: %s (after initialization) (until reboot) audit_send_reply <3>audit: %s <4>audit: audit_lost=%d audit_rate_limit=%d audit_backlog_limit=%d kernel/audit.c <3>audit: *NO* daemon at audit_pid=%d auditd dissapeared <5>%s printk limit exceeded out of memory in audit_expand rate limit exceeded <5>type=%d %s <4>audit: audit_backlog=%d > audit_backlog_limit=%d backlog limit exceeded audit(%lu.%03lu:%u): out of memory in audit_log_start %s=%d old=%d auid=%u ses=%u sid=%u subj=%s user pid=%d uid=%u auid=%u ses=%u ssid=%u kauditd audit_enabled audit_failure audit_pid audit_rate_limit audit_backlog_limit msg='%.1024s' msg= audit_enabled=%d res=0 op=trim res=1 op=make_equiv old= new= <6>audit: initializing netlink socket (%s) cannot initialize netlink socket 0123456789ABCDEF kernel/auditfilter.c <4>audit rule for LSM '%s' is invalid <3>AUDIT_POSSIBLE is deprecated op=remove rule path= key=(null) list=%d res=1 error updating LSM filters error updating watch, skipping error updating watch, removing op=updated rules specifying path= with dev=%u ino=%lu op=%s rule key= list=%d res=%d audit_send_list remove kprobes <6>Kprobes globally enabled <6>Kprobes globally disabled %p %s %s+0x%x %s %p %s %p preempt_schedule irq %d, desc: %p, depth: %d, count: %d, unhandled: %d ->handle_irq(): %p, ->chip(): %p, ->action(): %p ->action->handler(): %p, %14s set IRQ_INPROGRESS IRQ_DISABLED IRQ_PENDING IRQ_REPLAY IRQ_AUTODETECT IRQ_WAITING IRQ_LEVEL IRQ_MASKED IRQ_NOPROBE IRQ_NOREQUEST IRQ_NOAUTOEN dummy <3>setting trigger mode %d for irq %u failed (%pF) kernel/irq/manage.c Unbalanced IRQ %d wake disable <4>Unbalanced enable for IRQ %d <4>IRQ %d uses trigger mode %d; requested %d <3>Trying to free already-free IRQ %d <6>IRQ lockup detection disabled <4>Misrouted IRQ fixup support enabled. <4>This may impact system performance. <4>Misrouted IRQ fixup and polling support enabled <4>This may significantly impact system performance <3>irq event %d: bogus return value %x <3>irq %d: nobody cared (try booting with the "irqpoll" option) <3>handlers: <3>[<%p>] (%s) <0>Disabling IRQ #%d <3>Trying to mark IRQ%d probeable <3>Trying to mark IRQ%d non-probeable <3>Trying to install type control for IRQ%d chained <4>Trying to install %sinterrupt handler for IRQ%d <3>Trying to install chip data for IRQ%d <3>BUG: bad set_irq_chip_data(IRQ#%d) <3>Trying to install msi data for IRQ%d <3>Trying to install controller data for IRQ%d <3>Trying to set irq type for IRQ%d kernel/irq/chip.c <3>Trying to install chip for IRQ%d <3>Trying to cleanup invalid IRQ%d <3>Destroying IRQ%d without calling free_irq <3>Trying to initialize invalid IRQ%d kernel/irq/devres.c spurious count %u unhandled %u last_unhandled %u ms <4>relay: one or more items not logged [item size (%Zd) > sub-buffer size (%Zd)] <3>relay_late_setup_files: CPU %u has no buffer, it must have! kernel/relay.c ostype osrelease hostname domainname kernel/marker.c <5>Format mismatch for probe %s (%s), marker (%s) <5>Marker %s busy [simple_profiling] %u entries %u min [avm_simple_profiling_enable] resize %d pages instead %d pages [avm_simple_profiling_enable] need %d pages for %d bytes Buffer %d samples per block, trace-mask 0x%x <3>Unknown profiling mode. Assuming normal profiling without waparound. [simple_profiling] off: %u entries [simple_profiling] buffer full: %u entries recorded [simple_profiling] wraparround: %u entries recorded <6>bootmem::%s nid=%td start=%lx end=%lx mm/bootmem.c <6>bootmem::%s nid=%td start=%lx end=%lx flags=%x <6>bootmem::%s silent double reserve of PFN %lx <6>bootmem::%s nid=%td size=%lx [%lu pages] align=%lx goal=%lx limit=%lx <6>bootmem::%s nid=%td start=%lx end=%lx reserve=%d flags=%x <1>bootmem alloc of %lu bytes failed! Out of memory <6>bootmem::%s nid=%td start=%lx end=%lx aligned=%d <6>bootmem::%s nid=%td released=%lx <6>nid=%td start=%lx map=%lx end=%lx mapsize=%lx mode_bootmen_map=%p mm/filemap.c mm/mempool.c mm/oom_kill.c <4>tried to kill init! <4>tried to kill an mm-less task! <3>Killed process %d (%s) <4>%s invoked oom-killer: gfp_mask=0x%x, order=%d, oomkilladj=%d <6>[ pid ] uid tgid total_vm rss cpu oom_adj name <6>[%5d] %5d %5d %8lu %8lu %3d %3d %s <3>%s: kill process %d (%s) score %li or a child out of memory. Compulsory panic_on_oom is selected. out of memory. panic_on_oom is selected Out of memory (oom_kill_allocating_task) Out of memory and no killable processes... mm/page_alloc.c %s per-cpu: CPU %4d: hi:%5d, btch:%4d usd:%4d Active_anon:%lu active_file:%lu inactive_anon:%lu inactive_file:%lu unevictable:%lu dirty:%lu writeback:%lu unstable:%lu free:%lu slab:%lu mapped:%lu pagetables:%lu bounce:%lu %s free:%lukB min:%lukB low:%lukB high:%lukB active_anon:%lukB inactive_anon:%lukB active_file:%lukB inactive_file:%lukB unevictable:%lukB present:%lukB pages_scanned:%lu all_unreclaimable? %s lowmem_reserve[]: %lu*%lukB %ld total pagecache pages <0>Bad page state in process '%s' <0>page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d <0>Trying to fix it up, but a reboot is needed <0>Backtrace: <7>On node %d totalpages: %lu <7>free_area_init_node: node %d, pgdat %08lx, node_mem_map %08lx <7> %s zone: %lu pages used for memmap <4> %s zone: %lu pages exceeds realsize %lu <7> %s zone: %lu pages reserved <7> %s zone: %lu pages, LIFO batch:%lu include/linux/gfp.h <4>%s: page allocation failure. order:%d, mode:0x%x Failed to allocate %s hash table <6>%s hash table entries: %d (order: %d, %lu bytes) entering build_all_zonelists() return from set_zonelist_order() Built %i zonelists in %s order, mobility grouping %s. Total pages: %ld Movable mm/page-writeback.c pdflush pdflush: bogus wakeup mm/pdflush.c mm/readahead.c mm/truncate.c kswapd%d mm/vmscan.c Failed to start kswapd on node %d %s: orphaned page <3>%s: nr=%ld mm/prio_tree.c %s %lu Node %d, zone %8s pages free %lu min %lu low %lu high %lu scanned %lu (aa: %lu ia: %lu af: %lu if: %lu) spanned %lu present %lu %-12s %lu protection: (%lu , %lu pagesets cpu: %i count: %i high: %i batch: %i all_unreclaimable: %u prev_priority: %i start_pfn: %lu inactive_ratio: %u Node %4d, zone %8s, type %12s %6lu Page block order: %d Pages per block: %lu %-43s Free pages count per migrate type at order %6d %-23s Number of blocks type Node %d, zone %8s %12lu buddyinfo pagetypeinfo vmstat zoneinfo nr_free_pages nr_inactive_anon nr_active_anon nr_inactive_file nr_active_file nr_unevictable nr_mlock nr_anon_pages nr_mapped nr_file_pages nr_dirty nr_writeback nr_slab_reclaimable nr_slab_unreclaimable nr_page_table_pages nr_unstable nr_bounce nr_vmscan_write nr_writeback_temp pgpgin pgpgout pswpin pswpout pgalloc_normal pgalloc_movable pgfree pgactivate pgdeactivate pgfault pgmajfault pgrefill_normal pgrefill_movable pgsteal_normal pgsteal_movable pgscan_kswapd_normal pgscan_kswapd_movable pgscan_direct_normal pgscan_direct_movable pginodesteal slabs_scanned kswapd_steal kswapd_inodesteal pageoutrun allocstall pgrotated unevictable_pgs_culled unevictable_pgs_scanned unevictable_pgs_rescued unevictable_pgs_mlocked unevictable_pgs_munlocked unevictable_pgs_cleared unevictable_pgs_stranded unevictable_pgs_mlockfreed Unmovable Reclaimable Reserve Isolate BdiWriteback: %8lu kB BdiReclaimable: %8lu kB BdiDirtyThresh: %8lu kB DirtyThresh: %8lu kB BackgroundThresh: %8lu kB read_ahead_kb min_ratio max_ratio mm/page_isolation.c mm/fremap.c %s%s[%lx+%lx] mm/memory.c <3>Bad pte = %08llx, process = %s, vm_flags = %lx, vaddr = %lx mm/mlock.c mm/mmap.c mm/mprotect.c mm/rmap.c <0>Eeek! page_mapcount(page) went negative! (%d) <0> page pfn = %lx <0> page->flags = %lx <0> page->count = %x <0> page->mapping = %p <0> vma->vm_ops = %s <0> vma->vm_ops->fault = %s <0> vma->vm_file->f_op->mmap = %s include/linux/swapops.h anon_vma 0x%p-0x%p %7ld pages=%d phys=%lx ioremap vmalloc vmap user vpages vmallocinfo mm/vmalloc.c <4>vmap allocation failed: use vmalloc= to increase size. <3>Trying to vfree() bad address (%p) <3>Trying to vfree() nonexistent vm area (%p) mm/page_io.c <1>Write-error on swap-device (%u:%u:%Lu) <1>Read-error on swap-device (%u:%u:%Lu) %lu pages in swap cache Swap cache stats: add %lu, delete %lu, find %lu/%lu Free swap = %ldkB Total swap = %lukB mm/swap_state.c <3>swap_free: %s%08lx Filename Type Size Used Priority file partition %*s%s %u %u %d swaps <4>swap_dup: swap entry overflow <3>swap_dup: %s%08lx mm/swapfile.c SWAP-SPACE SWAPSPACE2 <3>Unable to find swap-space signature <3>version 0 swap is no longer supported. Use mkswap -v1 %s <4>Unable to handle swap header version %d <4>Swap area shorter than signature indicates <3>swapon: swapfile has holes <4>Empty swap-file <6>Adding %uk swap on %s. Priority:%d extents:%d across:%lluk <4>swapoff: cleared swap entry overflow <3>%s %s: dma_pool_free %s, %p/%lx (bad dma) <3>dma_pool_free %s, %p/%lx (bad dma) poolinfo - 0.1 %-16s %4u %4Zu %4Zu %2u <3>%s %s: dma_pool_destroy %s, %p busy <3>dma_pool_destroy %s, %p busy mm/dmapool.c pools ,size=%luk ,nr_inodes=%lu ,mode=%03o ,uid=%u ,gid=%u mm/shmem.c <3>tmpfs: No value for mount option '%s' nr_blocks nr_inodes mpol <3>tmpfs: Bad mount option %s <3>tmpfs: Bad value '%s' for mount option '%s' include/linux/dcache.h shmem_inode_cache <3>Could not register tmpfs <3>Could not kern_mount tmpfs dev/zero tmpfs mm/slab.c slabs_full accounting error slabs_partial inuse accounting error slabs_partial/inuse accounting error slabs_free/inuse accounting error free_objects accounting error <3>slab: cache %s error: %s %-17s %6lu %6lu %6u %4u %4d : tunables %4u %4u %4u : slabdata %6lu %6lu %6lu slabinfo - version: 2.1 # name : tunables : slabdata slabinfo <3>slab error in %s(): cache `%s': %s Can't free all objects %d %d %d <3>enable_cpucache failed for %s, error %d. <3>%s: Early error in slab %s <3>SLAB: cache with size %d has lost its name <3>kmem_cache_create: duplicate cache %s <3>kmem_cache_create: couldn't create cache %s. kmem_cache_create(): failed to create slab `%s' kmem_cache size-32 size-32(DMA) size-64 size-64(DMA) size-96 size-96(DMA) size-128 size-128(DMA) size-192 size-192(DMA) size-256 size-256(DMA) size-512 size-512(DMA) size-1024 size-1024(DMA) size-2048 size-2048(DMA) size-4096 size-4096(DMA) size-8192 size-8192(DMA) size-16384 size-16384(DMA) size-32768 size-32768(DMA) size-65536 size-65536(DMA) size-131072 size-131072(DMA) size-262144 size-262144(DMA) size-524288 size-524288(DMA) size-1048576 size-1048576(DMA) size-2097152 size-2097152(DMA) size-4194304 size-4194304(DMA) <3>VFS: Close: file count is 0 fs/open.c <4>%s called with NULL vfsmount fs/file_table.c <6>VFS: file-max limit %d reached fs/super.c &s->s_umount &s->s_lock &s->s_vfs_rename_mutex &s->s_dquot.dqio_mutex &s->s_dquot.dqonoff_mutex &s->s_dquot.dqptr_sem Emergency Remount complete VFS: Busy inodes after unmount of %s. Self-destruct in 5 seconds. Have a nice day... char-major-%d-%d char-major-%d <5>Recursive core dump detected, aborting <6>Core dump to %s pipe failed binfmt-%04x fs/exec.c pipe: pipe:[%lu] pipefs fs/namei.c fasync_cache fs/fcntl.c <3>kill_fasync: bad magic number in fasync_struct! names_cache filp dentry Dentry cache fs/dcache.c <3>BUG: Dentry %p{i=%lx,n=%s} still in use (%d) [unmount of %s %s] //deleted (deleted) <4>VFS: moving negative dcache entry <7>init_special_inode: bogus i_mode (%o) Inode-cache &inode->i_mutex &inode->i_alloc_sem &inode->inotify_mutex fs/attr.c <4>alloc_fd: slot %d not NULL! %s %s filesystems fs/filesystems.c %.*s device no device mounted on with fstype %i %i %u:%u shared:%i master:%i propagate_from:%i unbindable 0 0 &namespace_sem mnt_cache Failed to allocate mount hash table Mount-cache hash table entries: %lu <4>%s: sysfs_init error: %d <4>%s: kobj create error Can't create rootfs Can't allocate initial namespace fs/namespace.c <7>leak detected on mount(%p) writers count: %d ,nosuid ,nodev ,noexec ,noatime ,nodiratime ,relatime ,sync ,dirsync ,mand &p->lock security. system. trusted. user. &attr->mutex <4>%s: %s passed in a files arraywith an index of 1! include/linux/highmem.h fs/fs-writeback.c bdev <7>%s(%d): dirtied inode %lu (%s) on %s fs/pnode.c fs/splice.c Emergency Sync complete buffer_head fs/buffer.c <6>warning: process `%s' used the obsolete bdflush system call <6>Fix your initscripts? <3>Buffer I/O error on device %s, logical block %Lu __find_get_block_slow() failed. block=%llu, b_blocknr=%llu b_state=0x%08lx, b_size=%zu device blocksize: %d <3>VFS: brelse: Trying to free free buffer <3>getblk(): invalid block size %d requested <3>hardsect size: %d <4>lost page write due to I/O error on %s bio: can't allocate bios bio: can't create split pool fs/bio.c biovec-1 biovec-4 biovec-16 biovec-64 biovec-128 biovec-256 <4>VFS: busy inodes on changed media or resized disk %s <6>%s: detected capacity change from %lld to %lld fs/block_dev.c bdev_cache Cannot register bdev pseudo-fs Cannot create bdev pseudo-fs bdev: &bdev->bd_mutex fs/direct-io.c fs/mpage.c &ih->mutex inotify: register_filesystem returned %d! inotify: kern_mount ret %ld! inotify_watch_cache inotify_event_cache &dev->ev_mutex &dev->up_mutex max_user_instances max_user_watches max_queued_events inotifyfs eventpoll_epi eventpoll_pwq &ep->mtx [eventpoll] anon_inode: <3>anon_inode_init() failed (%d) anon_inodefs [signalfd] [timerfd] [eventfd] kiocb kioctx fs/aio.c <7>exit_aio:ioctx still alive: %d %d %d aio_run_iocb: iocb->ki_retry = NULL %d:%s POSIX ACCESS *NOINODE* MANDATORY ADVISORY %6s %s FLOCK MSNFS FLOCK ADVISORY LEASE BREAKING ACTIVE BREAKER UNKNOWN UNKNOWN READ RW NONE WRITE UNLCK %d %02x:%02x:%ld %d :0 %Ld EOF %Ld %Ld 0 EOF file_lock_cache fs/locks.c <3>locks_delete_lock: fasync == %p RSDTZW VmPeak: %8lu kB VmSize: %8lu kB VmLck: %8lu kB VmHWM: %8lu kB VmRSS: %8lu kB VmData: %8lu kB VmStk: %8lu kB VmExe: %8lu kB VmLib: %8lu kB VmPTE: %8lu kB %08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n [vdso] [heap] [stack] Size: %8lu kB Rss: %8lu kB Pss: %8lu kB Shared_Clean: %8lu kB Shared_Dirty: %8lu kB Private_Clean: %8lu kB Private_Dirty: %8lu kB Referenced: %8lu kB Swap: %8lu kB proc_inode_cache de_put: entry %s already free! proc_read_super: get root inode failed self/mounts sysvipc fs/nfsd /proc %-25s %-20s %-20s %-10s Soft Limit Hard Limit Units %-25s %-20s unlimited %-25s %-20lu pos: %lli flags: 0%o self fdinfo environ auxv personality limits cmdline statm mountinfo mountstats clear_refs smaps pagemap attr wchan oom_score oom_adj coredump_filter current fscreate keycreate sockcreate Max cpu time Max file size Max data size Max stack size Max core file size Max resident set Max processes Max open files Max locked memory Max address space Max file locks Max pending signals Max msgqueue size Max nice priority Max realtime priority Max realtime timeout fs/proc/generic.c <4>%s: removing non-empty directory '%s/%s', leaking at least '%s' <3>proc_file_read: Apparent buffer overflow! <4>proc_file_read: Read count exceeded <4>proc_dir_entry '%s/%s' already registered %d %d %d %d %d %d %d %d (%s) %c %d %d %d %d %d %u %lu %lu %lu %lu %lu %lu %ld %ld %ld %ld %d 0 %llu %lu %ld %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %d %d %u %u %llu %lu %ld Name: State: %s Tgid: %d Pid: %d PPid: %d TracerPid: %d Uid: %d %d %d %d Gid: %d %d %d %d NetMark: %d FDSize: %d Groups: Threads: %d SigQ: %lu/%lu SigPnd: ShdPnd: SigBlk: SigIgn: SigCgt: CapInh: CapPrm: CapEff: CapBnd: voluntary_ctxt_switches: %lu nonvoluntary_ctxt_switches: %lu R (running) S (sleeping) D (disk sleep) T (stopped) T (tracing stop) Z (zombie) X (dead) %3d %d-%d %3d %7d :/dev/tty :console :vtmaster serial pty:master pty:slave type:%d.%d %-20s /dev/%-8s system:/dev/tty system:console /dev/ptmx /dev/vc/0 system:vtmaster tty/ldisc tty/driver tty/ldiscs tty/drivers cpuinfo Character devices: Block devices: interrupts %d.%02d %d.%02d %d.%02d %ld/%d %d loadavg MemTotal: %8lu kB MemFree: %8lu kB Buffers: %8lu kB Cached: %8lu kB SwapCached: %8lu kB Active: %8lu kB Inactive: %8lu kB Active(anon): %8lu kB Inactive(anon): %8lu kB Active(file): %8lu kB Inactive(file): %8lu kB Unevictable: %8lu kB Mlocked: %8lu kB SwapTotal: %8lu kB SwapFree: %8lu kB Dirty: %8lu kB Writeback: %8lu kB AnonPages: %8lu kB Mapped: %8lu kB Slab: %8lu kB SReclaimable: %8lu kB SUnreclaim: %8lu kB PageTables: %8lu kB NFS_Unstable: %8lu kB Bounce: %8lu kB WritebackTmp: %8lu kB CommitLimit: %8lu kB Committed_AS: %8lu kB VmallocTotal: %8lu kB VmallocUsed: %8lu kB VmallocChunk: %8lu kB meminfo cpu %llu %llu %llu %llu %llu %llu %llu %llu %llu cpu%d %llu %llu %llu %llu %llu %llu %llu %llu %llu intr %llu ctxt %llu btime %lu processes %lu procs_running %lu procs_blocked %lu uptime %lu.%02lu %lu.%02lu fs/proc/proc_sysctl.c self/net kmsg kpagecount kpageflags slaves %sp%d <6> %s: unknown partition table unable to read partition table <4>%s: p%d ignored, start %llu is behind the end of the disk <4>%s: p%d size %llu limited to end of disk <3> %s: p%d could not be added: %ld %8lu %8lu %8llu %8u %8lu %8lu %8llu %8u %8u %8u %8u unknown-block(%u,%u) whole_disk [AIX] %s%d [DM] [EZD] fs/sysfs/inode.c <0>last sysfs file: %s fs/sysfs/file.c <3>missing sysfs attribute operations for kobject: %s &buffer->mutex fill_read_buffer: %s returned bad count fs/sysfs/sysfs.h fs/sysfs/dir.c <4>sysfs: duplicate filename '%s' can not be created fs/sysfs/symlink.c sysfs_dir_cache <3>sysfs: could not mount! <7>sysfs: could not get root inode <7>%s: could not get root dentry! sysfs &bb->mutex fs/sysfs/bin.c fs/sysfs/group.c <4>sysfs group %p not found for kobject '%s' fs/configfs/inode.c fs/configfs/configfs_internal.h fs/configfs/file.c fs/configfs/dir.c <3>configfs: Tried to unregister non-subsystem! <3>configfs: Tried to unregister non-empty subsystem! fs/configfs/symlink.c configfs_dir_cache <3>configfs: Unable to register filesystem! configfs devpts: get root dentry failed <3>devpts: called with bogus options fs/devpts/inode.c devpts dcookie_cache <3>SQUASHFS error: Failed to allocate %s cache <3>SQUASHFS error: Failed to allocate %s cache entry squashfs_inode_cache <6>squashfs: version 3.4 (2008/08/26) Phillip Lougher ERROR: no memory <3>SQUASHFS error: Metadata block marker corrupt @ %x <3>SQUASHFS error: <3>SQUASHFS error: zlib_inflateInit returned unexpected result 0x%x, srclength %d <3>SQUASHFS error: zlib_inflate returned unexpected result 0x%x, srclength %d, avail_in %d, avail_out %d <3>SQUASHFS error: zlib_inflateEnd returned unexpected result 0x%x, srclength %d <3>SQUASHFS error: sb_bread failed reading block 0x%x <3>SQUASHFS error: Failed to allocate fragment index table <3>SQUASHFS error: unable to read fragment index table <3>SQUASHFS error: Failed to allocate superblock <3>SQUASHFS error: Failed to allocate zlib workspace &msblk->read_data_mutex &msblk->read_page_mutex &msblk->meta_index_mutex <3>SQUASHFS error: unable to read superblock <4>SQUASHFS: Mounting a different endian SQUASHFS filesystem on %s <3>SQUASHFS error: Can't find a SQUASHFS superblock on %s <3>SQUASHFS error: Major/Minor mismatch, Squashfs 1.0 filesystems are unsupported <3>SQUASHFS error: Please recompile with Squashfs 1.0 support enabled <3>SQUASHFS error: Major/Minor mismatch, Squashfs 2.0 filesystems are unsupported <3>SQUASHFS error: Please recompile with Squashfs 2.0 support enabled <3>SQUASHFS error: Major/Minor mismatch, trying to mount newer %d.%d filesystem <3>SQUASHFS error: Please update your kernel <4>SQUASHFS: supported_squashfs_filesystem: not supported <4>SQUASHFS: sblk->bytes_used(%Lx) < 0 || sblk->bytes_used(%Lx) > i_size_read(s->s_bdev->bd_inode)(%Lx) <4>SQUASHFS: SQUASHFS_INODE_OFFSET(sblk->root_inode)(%x) > SQUASHFS_METADATA_SIZE(%x) [squashfs] use lzma compression <3>SQUASHFS error: Failed to allocate memory for lzma [squashfs] use zip compression metadata <3>SQUASHFS error: Failed to allocate read_page block <3>SQUASHFS error: Failed to allocate uid/gid table <3>SQUASHFS error: unable to read uid/gid table fragment <3>SQUASHFS error: Failed to allocate inode lookup table <3>SQUASHFS error: unable to read inode lookup table <3>SQUASHFS error: Root inode create failed <3>SQUASHFS error: Unable to read %s cache entry [%llx] <3>SQUASHFS error: Fail reading block list [%llx:%x] <3>SQUASHFS error: Failed to allocate meta_index <3>SQUASHFS error: Failed to allocate squashfs_dir_entry <3>SQUASHFS error: Unable to read directory block [%llx:%x] <3>SQUASHFS error: Unknown inode type %d in squashfs_iget! <3>SQUASHFS error: Unable to read inode [%llx:%x] <3>SQUASHFS error: Failed to allocate squashfs_dir_index <3>SQUASHFS error: Unable to read symbolic link [%llx:%x] <3>SQUASHFS error: (squashfs_symlink_readpage) length != index <3>SQUASHFS error: Failed to allocate block_list <3>SQUASHFS error: Unable to read page, block %llx, size %x <3>SQUASHFS error: Unable to read inode [%x:%x] ramfs nls_%s iso8859-1 <4>JFFS2: Compressor modul is in use. Unregister failed. <4>NULL compressor name at registering JFFS2 compressor. Failed. <4>Decompressor "%s" returned %d <4>JFFS2 compression type 0x%02x not available. <4>JFFS2: No memory for compressor allocation. Compression failed. <5>jffs2_rename(): Link succeeded, unlink failed (err %d). You now have a hard link <4>Can't allocate %d bytes of memory <4>iget() failed for ino #%u fs/jffs2/file.c <2>ref %p @0x%08x is not jeb->last_node (%p @0x%08x) fs/jffs2/nodelist.c <3>JFFS2 error: (%d) %s: Adding new ref %p at (0x%08x-0x%08x) not immediately after previous (0x%08x-0x%08x) <2>Dirty space 0x%x larger then free_size 0x%x (wasted 0x%x) <3>JFFS2 error: (%d) %s: duplicate frag at %08x (%p,%p) <3>JFFS2 error: (%d) %s: cannot allocate a jffs2_node_frag object jffs2_full_dnode jffs2_raw_dirent jffs2_raw_inode jffs2_tmp_dnode jffs2_refblock jffs2_node_frag jffs2_inode_cache <4>Error reading node from 0x%08x: %d <4>Short read from 0x%08x: wanted 0x%zx bytes, got 0x%zx <4>Node CRC %08x != calculated CRC %08x for node at %08x <4>Data CRC %08x != calculated CRC %08x for node at %08x <4>Error: jffs2_decompress returned %d <5>EEEEEK. jffs2_mark_node_obsolete called with NULL node <5>raw node at 0x%08x is off the end of device! fs/jffs2/nodemgmt.c <4>Read error reading from obsoleted node at 0x%08x: %d <4>Short read from obsoleted node at 0x%08x: %zd <4>Node totlen on flash (0x%08x) != totlen from node ref (0x%08x) <4>Write error in obliterating obsoleted node at 0x%08x: %d <4>Short write in obliterating obsoleted node at 0x%08x: %zd <4>argh. node added in wrong place at 0x%08x(%d) <4>nextblock 0x%08x <4>No nextblock , expected at %08x <2>Argh. No free space left for GC. nr_erasing_blocks is %d. nr_free_blocks is %d. (erasableempty: %s, erasingempty: %s, erasependingempty: %s) <4>Eep. Block 0x%08x taken from free_list had free_size of 0x%08x!! fs/jffs2/readinode.c <4>JFFS2 warning: (%d) %s: MTD point returned len too short: %zu instead of %u. <4>JFFS2 warning: (%d) %s: MTD point failed: error code %d. <3>JFFS2 error: (%d) %s: can not read %d bytes from 0x%08x, error code: %d. <3>JFFS2 error: (%d) %s: short read at %#08x: %zd instead of %d. <5>JFFS2 notice: (%d) %s: wrong data CRC in data node at 0x%08x: read %#08x, calculated %#08x. <3>JFFS2 error: (%d) %s: check_node_data() returned error: %d. <3>JFFS2 error: (%d) %s: Add node to tree failed %d <4>JFFS2 warning: (%d) %s: Eep. No valid nodes for ino #%u. <3>JFFS2 error: (%d) %s: short read at %#08x: %zu instead of %d. <5>JFFS2 notice: (%d) %s: Node header CRC failed at %#08x. {%04x,%04x,%08x,%08x} <5>JFFS2 notice: (%d) %s: Wrong magic bitmask 0x%04x in node header at %#08x. <5>JFFS2 notice: (%d) %s: header CRC failed on dirent node at %#08x: read %#08x, calculated %#08x <3>JFFS2 error: (%d) %s: illegal nsize in node at %#08x: nsize %#02x, totlen %#04x <3>JFFS2 error: (%d) %s: read remainder of name: error %d <5>JFFS2 notice: (%d) %s: node CRC failed on dnode at %#08x: read %#08x, calculated %#08x <3>JFFS2 error: (%d) %s: failed to allocate tn (%zu bytes). <4>JFFS2 warning: (%d) %s: inode node header CRC is corrupted at %#08x <3>JFFS2 error: (%d) %s: alloc fn failed <3>JFFS2 error: (%d) %s: REF_UNCHECKED but unknown node at %#08x <3>JFFS2 error: (%d) %s: Node is {%04x,%04x,%08x,%08x}. Please report this error. <3>JFFS2 error: (%d) %s: unknown INCOMPAT nodetype %#04X at %#08x <3>JFFS2 error: (%d) %s: unknown ROCOMPAT nodetype %#04X at %#08x <5>JFFS2 notice: (%d) %s: unknown RWCOMPAT_COPY nodetype %#04X at %#08x <5>JFFS2 notice: (%d) %s: unknown RWCOMPAT_DELETE nodetype %#04X at %#08x <3>JFFS2 error: (%d) %s: cannot read nodes for ino %u, returned error is %d <3>JFFS2 error: (%d) %s: Failed to build final fragtree for inode #%u: error %d <4>JFFS2 warning: (%d) %s: no data nodes found for ino #%u <5>JFFS2 notice: (%d) %s: but it has children so we fake some modes for it <3>JFFS2 error: (%d) %s: failed to read from flash: error %d, %zd of %zd bytes read <3>JFFS2 error: (%d) %s: CRC failed for read_inode of inode %u at physical location 0x%x <4>JFFS2 warning: (%d) %s: Truncating ino #%u to %d bytes failed because it only had %d bytes to start with! <3>JFFS2 error: (%d) %s: can't allocate %d bytes of memory for the symlink target path cache <3>JFFS2 error: (%d) %s: Argh. Special inode #%u with mode 0%o had metadata node <3>JFFS2 error: (%d) %s: Argh. Special inode #%u with mode 0%o has no fragments <3>JFFS2 error: (%d) %s: Argh. Special inode #%u with mode 0x%x had more than one node &f->sem <3>JFFS2 error: (%d) %s: Eep. Trying to read_inode #%u when it's already in state %d! <3>JFFS2 error: (%d) %s: cannot allocate inocache for root inode <3>JFFS2 error: (%d) %s: requestied to read an nonexistent ino %u <2>Error in jffs2_write_dirent() -- name contains zero bytes! <2>Directory inode #%u, name at *0x%p "%s"->ino #%u, name_crc 0x%08x fs/jffs2/write.c <5>Write of %zd bytes at 0x%08x failed. returned %d, retlen %zd <5>Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero <4>Deleting inode #%u with active dentry "%s"->ino #%u <4>jffs2_write_dnode: ri->totlen (0x%08x) != sizeof(*ri) (0x%08zx) + datalen (0x%08x) <4>Eep. We didn't actually write any data in jffs2_write_inode_range() <5>jffs2_scan_make_inode_cache(): allocation of inode cache failed <4>Eep. ofs 0x%08x not word-aligned! <4>ofs 0x%08x has already been seen. Skipping <4>Empty flash at 0x%08x ends at 0x%08x <4>Magic bitmask is backwards at offset 0x%08x. Wrong endian filesystem? <4>Old JFFS2 bitmask found at 0x%08x <4>You cannot use older JFFS2 filesystems with newer kernels <5>jffs2_scan_eraseblock(): Magic bitmask 0x%04x not found at 0x%08x: 0x%04x instead <5>Further such events for this erase block will not be printed <5>jffs2_scan_eraseblock(): Node at 0x%08x {0x%04x, 0x%04x, 0x%08x) has invalid CRC 0x%08x (calculated 0x%08x) <4>Node at 0x%08x with length 0x%08x would run over the end of the erase block <4>Perhaps the file system was created with the wrong erase size? <5>jffs2_scan_inode_node(): CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x <5>jffs2_scan_dirent_node(): Node CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x <3>Dirent at %08x has zeroes in name. Truncating to %d chars <5>jffs2_scan_dirent_node(): Name CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x <5>CLEANMARKER node found at 0x%08x has totlen 0x%x != normal 0x%x <5>CLEANMARKER node found at 0x%08x, not first node in block (0x%08x) <5>Read-only compatible feature node (0x%04x) found at offset 0x%08x <5>Incompatible feature node (0x%04x) found at offset 0x%08x <4>jffs2_scan_medium(): unknown block state fs/jffs2/scan.c <5>Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes <5>empty_blocks %d, bad_blocks %d, c->nr_blocks %d <4>Header CRC failed on REF_PRISTINE node at 0x%08x: Read 0x%08x, calculated 0x%08x <4>Node CRC failed on REF_PRISTINE data node at 0x%08x: Read 0x%08x, calculated 0x%08x <4>Data CRC failed on REF_PRISTINE data node at 0x%08x: Read 0x%08x, calculated 0x%08x <4>Node CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x <4>Name in dirent node at 0x%08x contains zeroes <4>Name CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x <4>Unknown node type for REF_PRISTINE node at 0x%08x: 0x%04x <5>Write of %d bytes at 0x%08x failed. returned %d, retlen %zd <4>jffs2_reserve_space_gc of %zd bytes for garbage_collect_dirent failed: %d <4>jffs2_write_dirent in garbage_collect_dirent failed: %ld <4>kmalloc of mdata failed in jffs2_garbage_collect_metadata() <4>read of old metadata failed in jffs2_garbage_collect_metadata(): %d <4>jffs2_reserve_space_gc of %zd bytes for garbage_collect_metadata failed: %d <4>Error writing new dnode: %ld <4>Node read failed in jffs2_garbage_collect_hole. Ret %d, retlen %zd. Data will be lost by writing new hole node <4>jffs2_garbage_collect_hole: Node at 0x%08x had node type 0x%04x instead of JFFS2_NODETYPE_INODE(0x%04x) <4>jffs2_garbage_collect_hole: Node at 0x%08x had totlen 0x%x instead of expected 0x%zx <4>jffs2_garbage_collect_hole: Node at 0x%08x had CRC 0x%08x which doesn't match calculated CRC 0x%08x <4>Data in the range 0x%08x to 0x%08x of inode #%u will be lost <4>jffs2_garbage_collect_hole: Node 0x%08x wasn't a hole node! <4>jffs2_reserve_space_gc of %zd bytes for garbage_collect_hole failed: %d <4>Error writing new hole node: %ld <4>jffs2_garbage_collect_hole: Old node still has frags! fs/jffs2/gc.c <4>jffs2_garbage_collect_hole: New node has no frags! <4>read_cache_page() returned error: %ld <4>jffs2_reserve_space_gc of %zd bytes for garbage_collect_dnode failed: %d <4>jffs2_g_c_deletion_dirent(): Read error (%d) reading obsolete node at %08x <4>jffs2_g_c_deletion_dirent(): Short read (%zd not %u) reading header from obsolete node at %08x <4>But it's obsolete so we don't mind too much <4>Deletion dirent "%s" not found in list for ino #%u <4>Raw node at 0x%08x wasn't in node lists for ino #%u <2>Checked all inodes but still 0x%x bytes of unchecked space? <4>Inode #%u is in state %d during CRC check phase! <4>Returned error for crccheck of ino #%u. Expect badness... <4>Eep. ret->gc_node for block at 0x%08x is NULL <4>eep. End of raw list while still supposedly nodes to GC <4>erase block at 0x%08x. free_size 0x%08x, dirty_size 0x%08x, used_size 0x%08x <2>Inode #%u already in state %d in jffs2_garbage_collect_pass()! <3>Error garbage collecting node at %08x! <3>jffs2_follow_link(): can't find symlink target <3>JFFS2 error: (%d) %s: child dir "%s" (ino #%u) of dir ino #%u appears to be a hard link <4>JFFS2 warning: (%d) %s: inode_cache/xattr_datum/xattr_ref not found in remove_node_refs()!! <4>Erase at 0x%08x finished, but state != MTD_ERASE_DONE. State is 0x%x instead. <4>Newly-erased block contained word 0x%lx at offset 0x%08tx <4>Failed to allocate page buffer for verifying erase at 0x%08x. Refiling <4>Read of newly-erased block at 0x%08x failed: %d. Putting on bad_list <4>Short read from newly-erased block at 0x%08x. Wanted %d, got %zd <4>Newly-erased block contained word 0x%lx at offset 0x%08x <4>Write clean marker to block at 0x%08x failed: %d <4>Short write to newly-erased block at 0x%08x: Wanted %zd, got %zd <4>kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later <4>Erase at 0x%08x failed immediately: -EROFS. Is the sector locked? <4>Erase at 0x%08x failed immediately: errno %d fs/jffs2/background.c <4>fork failed for JFFS2 garbage collect thread: %d jffs2_gcd_mtd%d <5>No space for garbage collection. Aborting GC thread <5>Device node has strange size %d <5>Read device numbers for inode %lu failed <4>jffs2_read_inode(): Bogus imode %o for ino %lu <5>Eep. read_inode() failed for ino #%u. unlinked %d <3>jffs2: sector_size is zero <6>jffs2: Flash size not aligned to erasesize, reducing to %dKiB <3>jffs2: Too few erase blocks (%d) <6>JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc. jffs2_i <3>JFFS2 error: Failed to initialise inode cache <3>JFFS2 error: Failed to initialise compressors <3>JFFS2 error: Failed to initialise slab caches <3>JFFS2 error: Failed to register filesystem fs/jffs2/super.c <7>[JFFS2 DBG] (%d) %s: Parent of directory ino #%u is #%u &c->alloc_sem &c->erase_free_sem <3>JFFS2 error: (%d) %s: eeep, space accounting for block at 0x%08x is screwed. <3>JFFS2 error: (%d) %s: free %#08x + dirty %#08x + used %#08x + wasted %#08x + unchecked %#08x != total %#08x. fs/jffs2/debug.c <3>JFFS2 error: (%d) %s: eeep, space accounting superblock info is screwed. <3>JFFS2 error: (%d) %s: free %#08x + dirty %#08x + used %#08x + erasing %#08x + bad %#08x + wasted %#08x + unchecked %#08x != total %#08x. <3>cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d <3>cannot write OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d <4>JFFS2: marking eraseblock at %08x as bad &c->wbuf_sem <6>JFFS2 write-buffering enabled buffer (%d) erasesize (%d) <4>JFFS2 flash size adjusted to %dKiB <3>inconsistent device description <4>mtd->read(0x%zx bytes from 0x%llx) returned ECC error fs/jffs2/wbuf.c <2>jffs2_flush_wbuf() called with alloc_sem not locked! <4>jffs2_flush_wbuf(): Write failed with %d <4>jffs2_flush_wbuf(): Write was short: %zd instead of %d <2>Malloc failure in wbuf recovery. Data loss ensues. <2>Old data are already lost in wbuf recovery. Data loss ensues. <4>Failed to allocate space for wbuf recovery. Data loss ensues. <4>Failed to allocate node refs for wbuf recovery. Data loss ensues. <2>Recovery of wbuf failed due to a second write error <5>Recovery of wbuf succeeded to %08x <3>JFFS2 error: (%d) %s: Failed to iget() ino #%u, err %ld <3>JFFS2 error: (%d) %s: Inode #%u is in strange state %d! <2>jffs2_flush_wbuf(): Accounting error. wbuf at 0x%08x has 0x%03x bytes, 0x%03x left. <2>jffs2_flush_wbuf(): But free_size for block at 0x%08x is only 0x%08x <2>jffs2_flash_writev(): Non-contiguous write to %08lx <2>wbuf was previously %08x-%08x rtime <4>inflateInit failed <5>inflate returned %d <4>deflateInit failed <4>Failed to allocate %d bytes for deflate workspace <4>Failed to allocate %d bytes for inflate workspace zlib fs/fuse/dev.c fuse_request fuse fs/fuse/dir.c fs/fuse/file.c ,user_id=%u ,group_id=%u ,default_permissions ,allow_other ,max_read=%u ,blksize=%lu fs/fuse/inode.c fuse init (API version %i.%i) fuse_inode connections <7>fuse exit &fc->inst_mutex %u:%u-fuseblk fd=%u rootmode=%o blksize=%u fs/fuse/control.c waiting fusectl debugfs 0x%08llx 0x%04llx 0x%02llx &ids->rw_mutex %10d %10d %4o %10lu %10lu %5u %5u %5u %5u %5u %5u %10lu %10lu %10lu <6>msgmni has been set to %d sysvipc/msg key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime %10d %10d %4o %10lu %5u %5u %5u %5u %10lu %10lu sysvipc/sem key semid perms nsems uid gid cuid cgid otime ctime ipc/shm.c SYSV%08x %10d %10d %4o %10lu %5u %5u %5lu %5u %5u %5u %5u %10lu %10lu %10lu sysvipc/shm key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime shmmax shmall shmmni msgmax msgmnb auto_msgmni mqueue_inode_cache QSIZE:%-10lu NOTIFY:%-5d SIGNO:%-5d NOTIFY_PID:%-6d mqueue queues_max msg_max msgsize_max key_jar &candidate->cons_lock &key->sem dead [anon] : %u/%u : empty security/keys/keyring.c keyring %s;%d;%d;%08x;%s _pid.%u _tid.%u _uid.%u _uid_ses.%u security/keys/request_key.c _req.%u /sbin/request-key key: pid:%d ci:%zu .request_key_auth : %u %5u: %5d %d/%d %d/%d %d/%d key-users Cannot create /proc/key-users root_maxkeys root_maxbytes security.capability security/security.c <7>%s could not verify security_operations structure. <6>Security Framework initialized crypto/api.c cryptomgr crypto/digest.c %s(%s) crypto/algapi.c <3>alg: Unexpected test result for %s: %d crypto/scatterwalk.c crypto name : %s driver : %s module : %s priority : %d refcnt : %d passed selftest : %s type : cipher blocksize : %u min keysize : %u max keysize : %u type : digest digestsize : %u type : compression type : larval flags : 0x%x type : unknown <3>%s: forced dispatching is broken (nr_sorted=%u), please report this anticipatory [%s] as-iosched %s-iosched &eq->sysfs_lock <3>I/O scheduler %s not found <3>Default I/O scheduler not found. Using noop. noop block/elevator.c (default) <6>io scheduler %s registered%s <3>elevator: type %s not found <3>elevator: switch to %s failed <3>%s: bad return=%d <3>%s: bad insertion point %d <6>%s: dev %s: type=%x, flags=%x <6> sector %llu, nr/cnr %lu/%u <6> bio %p, biotail %p, buffer %p, data %p, len %u <6> cdb: kblockd Failed to create kblockd blkdev_requests blkdev_queue <3>%s: over max size limit. <3>%s: over max segments limit. <3>%s: want %u bytes done, %u left <3>end_request: I/O error, dev %s, sector %llu __end_that <3>%s: bio idx %d >= vcnt %d block/blk-core.c <6>attempt to access beyond end of device <6>%s: rw=%ld, want=%Lu, limit=%Lu <3>generic_make_request: Trying to access nonexistent block-device %s (%Lu) <3>bio too big device %s (%u > %u) READ <7>%s(%d): %s block %Lu on %s &q->sysfs_lock <3>%s: request %p for device [%s] already tagged %d block/blk-tag.c <3>%s: tag %d is missing <3>%s: attempt to clear non-busy tag (%d) <3>%s: adjusted depth to %d block/blk-sysfs.c nr_requests max_hw_sectors_kb max_sectors_kb scheduler hw_sector_size nomerges rq_affinity <3>%s: prepare_flush_fn required <3>blk_queue_ordered: bad value %d block/blk-barrier.c <6>%s: set to minimum %d <6>%s: set to minimum %lx block/blk-settings.c blkdev_ioc block/blk-ioc.c block/blk-exec.c <3>blk: request botched include/linux/scatterlist.h block/blk-softirq.c block/blk-timeout.c <3>block: bad eh return: %d block-major-%d-%d block-major-%d major minor #blocks name diskstats partitions MEDIA_CHANGE=1 block/genhd.c register_blkdev: failed to get major for %s register_blkdev: cannot get major %d for %s blkext %4d %7d %10llu %s %4d %7d %s %lu %lu %llu %u %lu %lu %llu %u %u %u %u %-9s %03x:%05x %s%s %10llu %s driver: %s (driver?) ext_range removable <4>program %s is using a deprecated SCSI ioctl, please convert it to SG_IO block/noop-iosched.c idr_layer_cache lib/idr.c <4>idr_remove called for id=%d which is not allocated. <4>ida_remove called for id=%d which is not allocated. must have a ktype to be initialized properly! <3>kobject (%p): tried to init an initialized object, something is seriously wrong. invalid kobject pointer! <3>kobject (%p): %s lib/kobject.c <4>kobject: '%s' (%p): is not initialized, yet kobject_put() is being called. kobject: (%p): attempted to be registered with empty name! <3>%s failed for %s with -EEXIST, don't try to register things with the same name in the same directory. <3>%s failed for %s (%d) <3>kobject: can not set name properly! <3>kobject '%s' (%p): tried to add an uninitialized object, something is seriously wrong. <4>%s: kobject_add error: %d DEVPATH_OLD=%s <3>kobject_uevent: unable to create netlink socket! lib/kobject_uevent.c <3>add_uevent_var: too many keys <3>add_uevent_var: buffer size too small ACTION=%s SUBSYSTEM=%s SEQNUM=%llu %s@%s online offline lib/kref.c lib/prio_tree.c &pd->mutex radix_tree_node lib/radix-tree.c <4>%s: %d callbacks suppressed lib/string.c lib/vsprintf.c %16.16llx %8.8x %4.4x %s%s%*p: %s %s%s%.8x: %s %s%s%s lib/bitmap.c %s%0*lx lib/scatterlist.c .%03lld %lld%s %s lib/devres.c lib/kernel_lock.c lib/plist.c invalid distance too far back invalid distance code invalid literal/length code incorrect header check unknown compression method invalid window size invalid block type invalid stored block lengths too many length or distance symbols invalid code lengths set invalid bit length repeat invalid literal/lengths set invalid distances set incorrect data check %sGPIOs %d-%d no-bus , %s/%s , can sleep gpio-%-3d (%-20.20s) %s %s <3>GPIO-%d: module can't be gotten <4>GPIO-%d autorequested [auto] generic <3>gpiochip_add: gpios %d..%d (%s) not registered dummy device unable to get major %d for memory devs full urandom drivers/char/random.c %02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x poolsize entropy_avail read_wakeup_threshold write_wakeup_threshold boot_id uuid nonblocking <4>null TTY for (%d:%d) in %s <4>bad magic number for tty struct (%d:%d) in %s Couldn't register /dev/tty driver Couldn't register /dev/console driver <4>Warning: dev (%s) tty->count(%d) != #fd's(%d) in %s tty_fasync tty_poll tty_read <7>tty not NULL!! drivers/char/tty_io.c <3>Attempt to register invalid tty line number (%d). %s%c%x &tty->termios_mutex &tty->atomic_read_lock &tty->atomic_write_lock do_tty_hangup <5>SAK: killed process %d (%s): task_session_nr(p)==tty->session <5>SAK: killed process %d (%s): fd#%d opened to the tty tty_write <3>tty driver %s lacks a write_room method. <4>tty_check_change: tty->pgrp == NULL! tty_ioctl NULL tty tty_release_dev <7>tty_release_dev: bad idx when trying to free (%s) <7>tty_release_dev: driver.table[%d] not tty for (%s) <7>tty_release_dev: driver.termios[%d] not termios for (%s) <7>tty_release_dev: other->table[%d] not o_tty for (%s) <7>tty_release_dev: other->termios[%d] not o_termios for (%s) <7>tty_release_dev: bad pty pointers <4>tty_release_dev: %s: read/write wait queue active! <4>tty_release_dev: bad pty slave count (%d) for %s <4>tty_release_dev: bad tty->count (%d) for %s <6>tty_init_dev: ldisc open failed, clearing slot %d tty_open drivers/char/n_tty.c <3>n_tty_read: no tty->pgrp! <4>%s: %d input overrun(s) <3>%s: unknown flag %d n_tty <4>Use of setserial/setrocket to set SPD_* flags is deprecated <4>Warning?!? termios_locked is NULL. tty-ldisc-%d drivers/char/tty_ldisc.c %-10s %2d n_tty: init_tty <3>tty_ldisc_ref_wait <3>tty_ldisc_deref: no references. n_tty: get Couldn't open N_TTY ldisc for %s --- error %d. drivers/char/tty_buffer.c &port->mutex drivers/char/pty.c Couldn't allocate pty driver Couldn't allocate pty slave driver pty_master pty_slave ttyp Couldn't register pty driver Couldn't register pty slave driver Couldn't allocate Unix98 ptm driver Couldn't allocate Unix98 pts driver Couldn't register Unix98 ptm driver Couldn't register Unix98 pts driver Couldn't register /dev/ptmx driver %3i %s misc unable to get major %d for misc devices unable to get major %d for vcs device vcsa vcs%u vcsa%u <4>selection: kmalloc() failed <3>keyboard.c: k_lowercase was called - impossible <4>keyboard.c: can't emulate rawmode for keycode %d keyboard mode must be unicode for braille patterns drivers/char/vt.c vtconsole <4>Unable to create vt console class; errno = %ld vtcon%i <4>Unable to create device for %s; errno = %ld Couldn't register /dev/tty0 driver tty0 Couldn't allocate console driver Couldn't register console driver [M%c%c%c mono colour Console: %s %s %dx%d unblank_screen: tty %d not allocated ?? <3>vt: argh, driver_data is NULL ! con_write: tty %d not allocated [?6c [%d;%dR Console: switching consoles %d-%d to %s %s %dx%d to %s tty pid=%u uid=%u auid=%u ses=%u major=%d minor=%d comm= data= drivers/char/tty_audit.c &buf->mutex out of memory in TTY auditing <6>debug: sysrq always enabled. Loglevel set to %d sysrq-trigger <6>SysRq : HELP : This sysrq operation is disabled. loglevel0-8 Changing Loglevel reBoot Resetting Crashdump Trigger a crashdump tErm Terminate All Tasks Manual OOM execution kIll Kill All Tasks showMem Show Memory Nice Nice All RT Tasks showPc Show Regs show-all-timers(Q) Show clockevent devices & pending hrtimers (no others) unRaw Keyboard mode set to system default Emergency Sync showTasks Show State Unmount Emergency Remount R/O shoW-blocked-tasks Show Blocked State tffs tffs0 ticfg TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version %s) mount on mtd%u and mtd%u (double buffering) tffsd_mtd_0 <3>%s tffs_release: down_interruptible() failed WARING: use tffs in panic mode (minor %d) [tffs_read] msg = %s [tffs_write] msg = %s [MTD_READ] mtd_info->read is NULL [MTD_WRITE] mtd_info->write is NULL TFFS: no vallid filesystem TFFS_Cleanup: can't get mtd%u [TFFS_Cleanup] tffs_written build Cleanup_Buffer <6>TFFS_Cleanup: Build_Cleanup_Buffer failed 0x%x TFFS_Cleanup: flash segment %u file invallid WARNING: TFFS Name Table update ! (current %s new %s) TFFS Name Table %c <3>[%s] kmalloc failed write not supported avm_urlader_getenv_proc: id %x not supported <5>Defragging the environment variable region. <4>Failed to write %s to environment variable region. cleanup clear_id werkseinstellung tffs_write_proc: lock() failed success /proc/tffs: info request: %s /proc/tffs: index request: %s /proc/tffs: cleanup request: %s /proc/tffs: werkseinstellungen request: %s /proc/tffs: clear id 0x%x request: %s tffs_read_proc: lock() failed TFFS mount=mtd%u request=%u fill=%u event panding mode: read/write: sheared thread state=off thread state=init thread state=idle thread state=process thread state=down <6>Adam2 environment variables API installed. environment firmware_version <3>%s: tffs_ioctl: no data pointer for cmd number %u <3>%s: tffs_ioctl: copy_from_user failed <3>%s: tffs_ioctl: read failed: flags=O_WRONLY <3>%s: tffs_ioctl: alloc(%u) failed <3>%s: tffs_ioctl(READ): down_interruptible() failed <3>%s: tffs_ioctl: copy_to_user failed <3>%s: tffs_ioctl: write failed: flags=O_RDONLY <3>%s: tffs_ioctl(WRITE): down_interruptible() failed <3>%s: tffs_ioctl(WERKSEINSTELLUNG): down_interruptible() failed <3>%s: tffs_ioctl(CLEAR_ID): down_interruptible() failed <3>%s: tffs_ioctl(CLEANUP): down_interruptible() failed <3>%s: tffs_ioctl(REINDEX): down_interruptible() failed <3>%s: tffs_ioctl(INFO): down_interruptible() failed <3>%s: tffs_ioctl: unknwon HWRevision 118 117 110 114 159 129 162 155 156 171 115 108 94 127 174 137 168 122 139 145 167 150 152 165 154 141 135 146 153 143 101 144 136 160 164 170 161 175 172 173 134 120 102 121 104 103 105 95 107 106 128 79 112 131 140 147 148 149 [avm] configured: watchdog event debug [avm]: ar7wdt_init: failed [avm]: avm_event_init: failed [avm]: AVM Simple Profiling enabled. [avm_led] profile_init: disable [avm_led] profile_init: enable [avm_led] profile_init: write CSV file [avm_led] profile_init: write ASCII file [avm_led] profile_init: display ASCII [avm_led] profile_init: enable (wraparround-mode) [avm_led] profile_init: enable skb trace [avm_led] profile_init: enable skb trace (wraparround-mode) [avm_led] profile_init: other %u profiler disable User-Mode %s Supervisor-Mode %s Kernel-Mode %s Exeption-Mode %s <3>[avm_led] Failed: Could not open "/var/profile.log" <3>[avm_led] Failed: Could not write "/var/profile.log" [avm_led_profile_action] handle %u [avm_led] profile_action: disable, %u entries recorded (output: 2: CSV, 3: ASCII) [avm_led] profile_action: enable [avm_led] profile_action: %u entries recorded, write CSV file /var/profile.csv # measure time %lu msec [avm_led] profile_action: %u entries recorded, write ASCII file /var/profile.txt [profiling:%d] internal error data type %d unknown interrupted by irq 0x%08X;0x%08X;0x%08X;CODE;0x%08x;%s;%.*s;%u 0x%08X: CODE 0x%08x %s (%.*s interrupted by irq %u) 0x%08X;0x%08X;0x%08X;DATA;0x%08x;%s;%.*s;%u 0x%08X: DATA 0x%08x %s (%.*s interrupted by irq %u) 0x%08X;0x%08X;0x%08X;%s;0x%08x;%s;%.*s;%u; 0x%08X:%s 0x%08x %s (%.*s %s %u); 0x%08X: %s 0x%08x %s (%.*s %s %u) <3>memory full (abort writing file) [avm_led] file closed help <3>use: echo profiler [mask=0x] [count=] <3> 0: disable, 1: enable,2: write csv,3: write ascii,4: display ascii,5: enable+wraparound,6: enable skb,7: skb+wraparound <3>use: echo profiler performance [] [||liste] count= count=%d mask=0x mask=0x%x FREE TEXT CODE DATA BIRQ EIRQ BSWI ESWI BTIM ETIM BLET ELET BLHT ELHT BWRK EWRK BCPT ECPT BCPR ECPR BFUN EFUN ERROR begin hw irq end hw irq begin sw irq end sw irq begin timer end timer begin tasklet end tasklet begin hitasklet end hitasklet begin workitem end workitem begin cpphy_tx end cpphy_tx begin cpphy_rx end cpphy_rx begin func end func has no [dump_all_user_data] user %u "%s" %s pending events item %u: link-count %u, len %u id: %u ERROR: no data pointer item %u: ERROR: has no data %u user und %u events [dump_all_user_data] Items: [dump_all_user_data] Illegal Pointer I=0x%p [dump_all_user_data] %u unused Items [dump_all_user_data] Illegal Pointer I->data=0x%p item: link-count %u, len %u [dump_all_user_data] Illegal Pointer I->data->data=0x%p item: ERROR: has no data [dump_all_user_data] Data: [dump_all_user_data] Illegal Pointer D=0x%p [dump_all_user_data] Illegal Pointer D->data=0x%p [dump_all_user_data] %u unused Data(s) id: %u [dump_all_user_data] %u unused Datas <3>[avm_event_source_trigger]: not registered <3>[avm_event_source_trigger_one]: out of memory (items) context=%s <3>[avm_event_source_trigger]: avm_event_header inkorrekt ! <3>[avm_event_source_trigger]: out of memory (data descriptors) context=%s <3>[avm_event_source_release]: invalid handle NULL <3>[avm_event_source_release]: missing signatur <3>[avm_event_source_register]: overlapping event_mask current=%LX new=%LX <3>[avm_event_source_register]: out of memory <3>[avm_event_source_register]: out of resources <3>%s down_interruptible() failed avm_event <3>[%s]: avm_event_open: open O_APPEND not supported <3>[%s] down_interruptible() failed <3>%s: avm_event_open: open malloc failed <3>%s: avm_event_write: write_lengh < %u avm_event_write <3>%s: avm_event_write: copy_from_user failed <3>%s: avm_event_write: not registered <3>[%s]: avm_event_cmd_undef avm_event_read <3>%s: tffs_read: copy_to_user failed <3>[avm_event_source_user_mode_notify]: out of memory <3>[avm_event] register_chrdev_region failed: reason %d! <3>[avm_event] cdev_alloc failed! <3>[avm_event] cdev_add failed! [avm_event] ERROR: not all Item(s) freeed %u missing [avm_event] ERROR: not all Data(s) freeed %u missing <0>AVM_WATCHDOG_ungraceful_release: handle %u (%s) still registered! AVM_WATCHDOG: System Init UEberwachung abgeschlossen (%lu ms noch verfuegbar) <0>AVM_WATCHDOG_reboot(hdl=%u, name=%s): reboot <0>registered appls: <0> hdl=%u, name=%s ar7wdt_hw_reboot: watchdog expired <3>AVM_WATCHDOG_reboot(hdl=%u): timer not triggered ar7wdt_hw_reboot: init sequence hangs ! alive ? <6>AVM_WATCHDOG_disable() <6>registered appls: <6> hdl=%u, name=%s, disabled. init-ctrl AVM_WATCHDOG: System Init UEberwachung %u Sekunden AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version %s, build: %s %s) Sep 8 2010 16:31:39 watchdog disabled panic reboot disabled watchdog [avmwdt] register_chrdev_region failed: reason %d! [avmwdt] cdev_alloc failed! [avmwdt] cdev_add failed! register init-start init-done [AVMDBG_OVR] ---- start avmdebug(suppress %ld bytes) ---- ---- eof avmdebug ---- %lld (inval=0x%x) %s+%#lx/%#lx [%s] %s+%#lx/%#lx <[%08lu]debug-message lost %d > [%08lu] kernel info: user pid: %s: %x %s %d <3>[avm_debug]: write: copy_from_user failed AVM_PRINTK [avm_debug]redirect kernel-messages (/dev/debug) STD_PRINTK [avm_debug]standard kernel-messages AVMDBG_EOF AVMDBG_SIGNAL avm_DebugSignal: %s [avm_debug]unknown mode: use: %s, %s or %s <3>[avm_debug]avm_DebugCallUnRegister: error: no handle for %p found <3>[avm_debug] DebugCallRegister("%s", 0x%p, %p): invalid param <3>[avm_debug]DebugCallRegister: prefix '%s' already exist <3>[avm_debug] register_chrdev_region failed: reason %d! <3>[avm_debug] cdev_alloc failed! <3>[avm_debug] Could not allocate debug buffer space! <3>[avm_debug] cdev_add failed! avmdebug [avmdebug] push supportdata <3>[avmdebug]%s: error during creation of socket %d /var/tmp/me_avmdebug.ctl <3>[avmdebug]%s:bind failed %d /var/tmp/me_ctlmgr.ctl pushmail 2 [avmdebug]%s: failed with ret=%d <3>%s: avm_power_open: open malloc failed avm_power eth: port %d status %d throttle %d [avm_power]eth: port %x status %x throttle %x <3>[avm_power]PowerManagmentRessourceInfo: unknown device: %d <3>[%lu]idle: %d %%(%d %%) <3>[avm_power]PowerManagmentRessourceInfo: device: %s value=(0x%x)%d changes=%d <3>[avm_power]PowerManagmentRelease: invalid Handle <3>[avm_power]PowerManagmentRegister: invalid param %p %p <3>[avm_power] register_chrdev_region failed: reason %d! <3>[avm_power] cdev_alloc failed! <3>[avm_power] cdev_add failed! usbpower pm_info_stat [avm_power] avm event register failed ! cpu_idle telefonprofile powermanagment_status adsl_event <4>[avm_power]unknown event: %d <4>[avm_power]can't alloc event: %d <3>[avm_power_disp_loadrate] cpu-idle-event: MEM: %d %d %d %%, active=%ld free=%ld/%ld <4>[avm_power]event: %d not handled <3>[avm_power]temperature event: %d pm_info <3>[avm_power]pm_ressourceinfo_thread: exit available powermode: [avm_power] format error: "MODE = " <3>%s <3>[%s]: avm_power_write: copy_from_user failed avm_power_write pd_speed_man PMINFO_MODE <3>[avm_power] format error: '%s' <3>[avm_power] use: "PMINFO_MODE = device, norm_rate, multiplier, divider, offset" <3>[avm_power] pm_ressourceinfo_scriptparse: unknown_device %d: '%s' <3>[avm_power] pm_ressourceinfo_scriptparse: invalid format '%s' powerdevice_unknown <7>[avm_power] pm_ressourceinfo_scriptparse: %s: norm_power_rate=%d act_rate=%d mul=%d div=%d offset=%d NormP=%d mW -> SumNormP=%d mW <3>[avm_power] pm_ressourceinfo_scriptparse: warning divider is zero '%s' ETH_MODE <3>[avm_power] use: "ETH_MODE = port, state" <3>[avm_power] : unknown port %u: <3>[avm_power] : unknown status - set status to powered(2) <3>[avm_power] : ethernet not registered <3>[avm_power] : ethernet switch failed IDLE_MODE <3>[avm_power] use: "IDLE_MODE = mode" speedup piglet adsl vdsl update fastspeed normalspeed slowspeed usb_profile_on usb_profile_off pd_speed_on pd_speed_onfast pd_speed_off atm_profile_on atm_profile_off usb_current_req powerdevice_none powerdevice_cpuclock powerdevice_dspclock powerdevice_systemclock powerdevice_wlan powerdevice_isdnnt powerdevice_isdnte powerdevice_analog powerdevice_dect powerdevice_ethernet powerdevice_dsl powerdevice_usb_host powerdevice_usb_client powerdevice_charge powerdevice_loadrate powerdevice_temperature powerdevice_dectsync powerdevice_usb_host2 powerdevice_usb_host3 powerdevice_dsp_loadrate powerdevice_vdsp_loadrate powerdevice_maxdevices drivers/serial/serial_core.c <1>Removing wrong port: %p != %p I/O 0x%lx I/O 0x%lx offset 0x%x MMIO 0x%llx *unknown* <6>%s%s%s%d at %s (irq = %d) is a %s <3>Cannot register tty device on line %d serinfo:1.0 driver%s%s revision:%s mmio:0x %d: uart:%s %s%08llX irq:%d tx:%d rx:%d fe:%d pe:%d brk:%d oe:%d |RTS |CTS |DTR |DSR port: <5>%s sets custom speed on %s. This is deprecated. <3>uart_close: bad serial port count; tty->count is 1, state->count is %d <3>uart_close: bad serial port count for %s: %d &state->mutex <3>%s%s%s%d: Unable to drain transmitter PORT_16550A [UART AVM] Max Nr. Uartports(%d) ueberschritten: %d <6>Serial: SERIAL_AVM_8250 driver subsystem char MAJOR=%u MINOR=%u DEVTYPE=%s PHYSDEVPATH=%s PHYSDEVBUS=%s PHYSDEVDRIVER=%s dev_attr_show: %s returned bad count drivers/base/core.c <3>Device '%s' does not have a release() function, it is broken and must be fixed. <3>%s %s: uevent: unsupported action-string; this will be ignored in a future kernel version uevent <3>Class suspend failed for %s <3>Class driver suspend failed for %s drivers/base/sys.c <4>sysdev: invalid class passed to sysdev_driver_register! <4>sysdev: class %s: driver (%p) has already been registered to a class, something is wrong, but will forge on! <3>%s: invalid device class <3>%s: uevent attr (%s) failed <3>%s: driver_add_attrs(%s) failed <3>%s: add_bind_files(%s) failed drivers/base/bus.c &(&priv->bus_notifier)->rwsem drivers_autoprobe drivers_probe unbind <4>%s: device %s already bound drivers/base/dd.c <3>%s: driver_sysfs_add(%s) failed <4>%s: probe of %s failed with error %d <4>Driver '%s' needs updating - please use bus_type methods <3>Error: Driver '%s' is already registered, aborting... class drivers/base/class.c %s called for class '%s' before it was initialized struct class mutex platform:%s MODALIAS=platform:%s %s.%d <3>%s: failed to claim resource %d platform modalias crash_notes possible firmware drivers/base/devres.c drivers/base/attribute_container.c <3>%s %s: failed to allocate class container drivers/base/transport_class.c drivers/base/dma-mapping.c <3>%s: class_register failed <3>%s: class_create_file failed FIRMWARE=%s TIMEOUT=%i firmware/%s <3>%s %s: %s: unexpected value (%d) <3>%s: unable to alloc buffer drivers/base/firmware_class.c <3>%s %s: %s: kmalloc(struct firmware) failed <6>%s %s: firmware: using built-in firmware %s <6>%s %s: firmware: requesting %s <3>%s %s: %s: kmalloc failed <3>%s %s: %s: device_register failed <3>%s %s: %s: sysfs_create_bin_file failed <3>%s %s: %s: device_create_file failed %s:%s <3>loop: Write error at byte offset %llu, length %i. <3>loop: Transfer error at byte offset %llu, length %i. drivers/block/loop.c <3>loop: Failed to allocate temporary page for write. <3>loop: transfer error block %ld loop%d &lo->lo_ctl_mutex loop <6>loop: module loaded <6>loop: out of memory <4>nbd: killing hung xmit (%s, pid: %d) <7>%s: request %p: %s drivers/block/nbd.c <4>%s: shutting down socket recv send <3>%s: Attempted %s on closed socket in sock_xmit <4>nbd (pid %d: %s) got signal %d invalid <7>%s: request %p: sending control (%s@%llu,%luB) <3>%s: Send control failed (result %d) <7>%s: request %p: sending %d bytes data <3>%s: Send data failed (result %d) set-blksize set-sock set-size do-it clear-sock clear-que print-debug set-size-blocks disconnect set-read-only flush-buffer-cache <7>%s: nbd_ioctl cmd=%s(0x%x) arg=%lu <6>%s: NBD_DISCONNECT <3>nbd: sysfs_create_file failed! <3>%s: Receive control failed (result %d) <3>%s: Wrong magic (0x%lx) <3>%s: Unexpected reply (%p) <3>%s: Other side returned error (%d) <7>%s: request %p: got reply <3>%s: Receive data failed (result %d) <7>%s: request %p: got %d bytes data <4>%s: queue cleared <6>%s: next = %p, prev = %p, head = %p <3>%s: Write on read-only <3>%s: Attempted send on closed socket <3>%s: Request send failed <2>nbd: max_part must be >= 0 deadline <6>nbd: registered device at major %d <7>nbd: debugflags=0x%x &nbd_dev[i].tx_lock nbd%d <7>%s: request %p: dequeued (flags=%x) <6>nbd: unregistered device at major %d Ethernet status <3>[cpmac] [%s] Could not register avm_event_source! <3>[cpmac] [%s] cpmac_mcfw_init: failed! drivers/net/avm_cpmac/cpmac_main.c <3>[cpmac] [%s] nomem for status update <4>[cpmac] [%s] unhandled id %u! <4>[cpmac] cpphy_cppi_teardown, tx already pending <4>[cpmac] [%s] tx, already torn down <4>[cpmac] cpphy_cppi_teardown, break tx wait <4>[cpmac] cpphy_cppi_teardown, rx already pending <4>[cpmac] cpphy_cppi_teardown, rx, already torn down <4>[cpmac] cpphy_cppi_teardown, break rx wait drivers/net/avm_cpmac/cpphy_if.c <4>[cpmac] [%s] 10 MBit/s does not work yet! <3>[cpmac] [%s] Error! There is no usable bit combination for this device! Using 0 anyway. <3>[cpmac] [%s] Error! No free VLAN groups! Using 0 anyway! <3>[cpmac] [%s] Error! No unassigned VID (for default) available! drivers/net/avm_cpmac/cpphy_adm6996.c <3>[cpmac] [%s] Error! No unassigned VID (for portout) available! <3>[cpmac] [%s] There seems to be no WAN port for PPPoA!? <4>[cpmac] [%s] Already correct setting: %stagged <3>[cpmac] <3>[cpmac] Switch dump requested, but no known switch is connected. <3>[cpmac] Global power setting used. Doing no switch dump. <4>[cpmac] [%s] No 32 bit writes possible [%s] addr %x out of range (max %x) <4>[cpmac] [%s] No 32 bit reads possible <3>[cpmac] Registerdump ADM6996: All values are hexadecimal! <3>[cpmac] Reg %#3x = %#4x <3>[cpmac] Port control: <3>[cpmac] Additional VID info <3>[cpmac] VLAN Filters: <3>[cpmac] Filter %u: VFL = %#4x VFH = %#4x <3>[cpmac] [%s] Illegal port %u given <3>[cpmac] [%s] No WAN port defined! <3>[cpmac] [%s] Unknown VID %u given! [%s] illegal phyadr %x (max 0x%x) [%s] illegal addr %x (max 0x%x) <4>[cpmac] [%s] Semaphore interrupted! <3>[cpmac] Could not read correct value for register %#x read: serial_register[%x] out of index (max 0x%x) <3>[cpmac] adm_update_error_status, unhandled port %u <3>[cpmac] Registerdump Tantos: All values are hexadecimal! <3>[cpmac] Reg %3x = %4x %3x = %4x %3x = %4x %3x = %4x %3x = %4x %3x = %4x %3x = %4x <3>[cpmac] Additional register dump: <3>[cpmac] For PHY %u <3>[cpmac] Reg %3x = %4x <3>[cpmac] Counter %3x = %4x <3>[cpmac] MAC table entries for FID = %u <3>[cpmac] static : FID %#x, ports %#2x, %04x%04x%04x, no details yet <3>[cpmac] dynamic: FID %#x, ports %#2x, %04x%04x%04x, age %u drivers/net/avm_cpmac/cpphy_ar8216.c <4>[cpmac] [%s] This will take approx. 12 seconds! <3>[cpmac] [%s] port %u: Illegal mode (%u) <3>VLAN_TABLE_1_VT_FULL_VIO ! <3>VLAN_TABLE_1_VT_BUSY ! <3>[cpmac] Counters <3>[cpmac] CPU port Port 1 Port 2 Port 3 Port 4 Port 5 <3>[cpmac] %14s %10.u %10.u %10.u %10.u %10.u %10.u <3>[cpmac] [%s] No ar_work_item found! <4>[cpmac] [%s] Out of memory! <3>[cpmac] Port control registers (all values in hex) <3>[cpmac] CPU port Port 1 Port 2 Port 3 Port 4 Port 5 <3>[cpmac] 0x100 0x200 0x300 0x400 0x500 0x600 (0x%02x) %8.x <3>[cpmac] %s <3>[cpmac] Global control registers (all values in hex) <3>[cpmac] 0x%2.x %8.x <3>[cpmac] MII registers (all values in hex) <3>[cpmac] Port 1 Port 2 Port 3 Port 4 Port 5 <3>[cpmac] (0x%02x) %8.x %8.x %8.x %8.x %8.x <3>[cpmac] MDIO Debug registers RxBroad RxPause RxMulti RxFcsErr RxAlignErr RxRunt RxFragment Rx64Byte Rx128Byte Rx256Byte Rx512Byte Rx1024Byte Rx1518Byte RxMaxByte RxTooLong RxGoodByteHigh RxGoodByteLow RxOverflow Filtered TxBroad TxPause TxMulti TxUnderRun Tx64Byte Tx128Byte Tx256Byte Tx512Byte Tx1024Byte Tx1518Byte TxMaxByte TxOverSize TxByteHigh TxByteLow TxCollision TxAbortCol TxMultiCol TxSingleCol TxExcDefer TxDefer TxLateCol RxBadByteLow RxBadByteHigh magpie <3>[cpmac] [%s] register_netdev(%s) failed rc = %d <3>[cpmac] [copy_mc_list] cannot allocate memory. Multicast may not work properly from now. <3>[cpmac] ***************************************************************************** <3>[cpmac] *** *** <3>[cpmac] *** ATTENTION! There is no valid ethernet configuration for this product! *** drivers/net/avm_cpmac/cpphy_entry.c <3>[cpmac] Version: %s 1.108.1.54 - Revision 811:1147 - Mi 8.09.2010 16:32:15 <3>[cpmac] [%s] Out of memory! %s%u cpmac 136 maca %llx:%llx:%llx:%llx:%llx:%llx <3>[cpmac] [%s] Error! Could not reserve GPIO %u for reset! <3>[cpmac] [%s] No Profi mode possible! CPMAC workqueue CPMAC reset phy 0 CPMAC reset phy 1 <3>[cpmac] [%s] %p not on lru <3>[cpmac] MAC table: %d entries, %d skbs (jiffies now: %lu) <3>[cpmac] %02x:%02x:%02x:%02x:%02x:%02x port %d (%d skbs) last %lu <3>[cpmac] [%s] %p not in hash <4>[cpmac] [%s] got packet before initialisation <3>[cpmac] [%s] Error! Unknown port %#x, ignore entry <3>[cpmac] [%s] macport_del didn't delete ar8216macport ar8216_ar_init: kmem_cache_create failed <3>[cpmac] [%s] tried to set mode for port %u <3>[cpmac] [%s] tried to set an illegal mode %u <3>[cpmac] [%s] tried to set a mode %u that is not possible for this port %u. <4>[cpmac] [%s] Function for '%s' (%u) is not set! <3>[cpmac] [%s] NULL pointer! <3>[cpmac] [%s] Illegal size (%u) given! %04x <3>[cpmac] %s <3>[cpmac] [%s] Different function for '%s' (%u) already added! drivers/net/avm_cpmac/cpphy_mgmt.c <3>[cpmac] [%s] item '%s' (%u) active, but without function! <3>[cpmac] [cpphy_mgmt_power] Illegal power mode encountered! (%u) <3>[cpmac] [%s] Internal error: Global power with unknown value %u <3>[cpmac] [%s] Illegal port power state (%#x)! TOGGLE_VLAN TICK UPDATE_MAC_TABLE SWITCH_DUMP TOGGLE_PPPOA <3>[cpmac] [%s] copy from user failed <3>[cpmac] [%s] copy to user failed drivers/net/avm_cpmac/cpmac_puma_if.c <7>%s: packet from %s stolen by %pF <3>[cpmac] [%s] Attention! phy_dev already set! <3>[cpmac] [%s] GPIO resource not available! <4>[cpmac] [%s] Semaphore unavailable <4>[cpmac] [%s] Magpie still in reset. Not switching! <3>[cpmac] [%s] Illegal target %u given! CPMAC MAGPIE MDIO switch <3>[cpmac] [%s] CPMAC_MAX_ASSIGNED_VIDS reached! <3>[cpmac] [%s] VID %#x already assigned! <3>[cpmac] General switch status: <3>[cpmac] Devices: <3>[cpmac] '%s': portset %#x, VID %#x (%u) <3>[cpmac] [%s] Device VID %x and net_device VID (%x) differ! <3>[cpmac] Ports: keep no tags keep tags , is CPU port , is WAN port <3>[cpmac] %u: portvlan %#x, vid %#x (%u), %s %s <4>[cpmac] [%s] Illegal port %u! <4>[cpmac] [%s] Illegal port (%u) or fast forward already set! <3>[cpmac] [%s] Call back function is a NULL pointer! <4>[cpmac] [%s] for '%s' (cb = %p) failed! <3>[cpmac] [%s] Someone tried to register a too long device name! drivers/net/avm_cpmac/cpphy_switch.c <4>[cpmac] [%s] Global power mode set. Aborting configuration. <3>[cpmac] [%s] Illegal configuration for this hardware! <3>[cpmac] [%s] Unknown cpmac_configuration %u <3>[cpmac] [%s] Too many devices in configuration! <4>[cpmac] [%s] Device '%s' (%u) does not include the CPU port! mask = %#x <3>[cpmac] [%s] Attention! The masks for '%s' (%#x) and '%s' (%#x) overlap! <3>[cpmac] [%s] Illegal VID %#x for WAN given!! <3>[cpmac] [%s] Error! VID %#x (%u) already assigned! <3>[cpmac] [%s] Error! No unassigned VID (for MC out) available! <3>[cpmac] [%s] No config_ports function set! Aborting! loopback: Failed to register netdevice: %d <6>tun: %s, %s Universal TUN/TAP device driver <6>tun: %s (C) 1999-2004 Max Krasnyansky <3>tun: Can't register pernet ops <3>tun: Can't register misc device %d include/net/netns/generic.h <3>RTNL: assertion failed at %s (%d) drivers/net/tun.c tun%d tap%d Puma_CPMAC_Alloc_BD <3>[%s] Creating workqueue failed! Assertion failed! %s,%s,%s,line=%d (rxCppi->listEntryPtr != NULL) drivers/net/avalanche_cpgmac_f/ddc_cpgmac_f_TxRx.c WARN: %s : unknown desriptor (%p),pkt_type=%d <3>%s error: Error %08X from CPMAC DDC TX Channel Open() Texas Instruments : %s <3>Error getting statistics from DDC for %s %-35s: %u ifSpeed dot3StatsDuplexStatus ifAdminStatus ifOperStatus %-35s: %lu ifLastChange ifInDiscards ifInErrors ifOutDiscards ifOutErrors ifInGoodFrames ifInBroadcasts ifInMulticasts ifInPauseFrames ifInCRCErrors ifInAlignCodeErrors ifInOversizedFrames ifInJabberFrames ifInUndersizedFrames ifInFragments ifInFilteredFrames ifInQosFilteredFrames ifInOctets ifOutGoodFrames ifOutBroadcasts ifOutMulticasts ifOutPauseFrames ifDeferredTransmissions ifCollisionFrames ifSingleCollisionFrames ifMultipleCollisionFrames ifExcessiveCollisionFrames ifLateCollisions ifOutUnderrun ifCarrierSenseErrors ifOutOctets if64OctetFrames if65To127POctetFrames if128To255OctetFrames if256To511OctetFrames if512To1023OctetFrames if1024ToUpOctetFrames ifNetOctets ifRxSofOverruns ifRxMofOverruns ifRxDMAOverruns Loading cpgmac driver for puma5 %d:%x:%d:%d:%u:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%x:%d:%u:%u:%x:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d <7>%s. <3>%s: config_pid_range failed with error code %d. cpmac%d CPMAC: Etherdev alloc failed for device inst %d. <3>%s: create_pid failed with error code %d. <7>Cpmac: Enabled the debug print. <7>Cpmac: No manual link params, defaulting to auto negotiation. auto <7>Cpmac: Invalid or No value of link speed specified, defaulting to auto speed. <7>Cpmac: Invalid or No value of link mode specified, defaulting to auto mode. 1000 <7>Link is manually set to the speed of %s speed and %s mode. Cpmac: Could not register device for inst %d because of reason code %d. platform device unregistered. driver file removed. driver unregistered. <7>Cpmac: %s io=%04x avalanche/ _rfc2665_stats avalanche/cpmac_stats avalanche/cpmac_link avalanche/cpmac_ver avalanche/cpmac_config TI %s - %s Cpmac: Installed %d instances. Cpmac driver is allocating buffer memory at init time. CPMAC devices = %d EMAC Driver Internal Config Info for Unit %d vlanEnable = %d rxBufSize = %d rxBufOffset = %d instId = %d numTxChannels = %d numRxChannels = %d cpmacBusFrequency = %d baseAddress = %08X RxMaxFrags = %d mdioBaseAddress = %08X mdioResetLine = %d PhyMask = %08X MLinkMask = %08X MdioBusFrequency = %d MdioClockFrequency = %d intrLine = %d MdioTickMSec = %d phyMode = %d RxVlan = %d ExtEn = %d GigForce = %d IfCtlb = %d IfCtla = %d RxFifoFlowEn = %d CmdIdle = %d txShortGapEnable = %d txPacingEnable = %d txFlowEnable = %d rxFlowEnable = %d loopbackEnable = %d PortVlan = %d HiPriThres = %d copyMACCntrlFrsEne = %d copyShortFramesEn = %d copyErrorFramesEn = %d promiscousEnable = %d promiscousChannel = %d broadcastEnable = %d broadcastChannel = %d multicastEnable = %d multicastChannel = %d maxRxPktLength = %d RxFlowThres = %d cppi4InitCfg.resetLine = %0d IdVer = %#x Mac_In_Vector = %#x Mac_EOI_Vector = %#x Mac_IntStat_Raw = %#x Mac_IntStat_Masked = %#x Mac_IntMask_Set = %#x Mac_IntMask_Clear = %#x Rx_MBP_Enable = %#x Rx_Unicast_Set = %#x Rx_Unicast_Clear = %#x Rx_Maxlen = %#x MacControl = %#x MacStatus = %#x EMControl = %#x FifoControl = %#x Mac_Cfig = %#x Soft_Reset = %#x MacSrcAddr_Lo = %#x MacSrcAddr_Hi = %#x MacHash1 = %#x MacHash2 = %#x BoffTest = %#x Tpace_Test = %#x Rx_Pause = %#x Tx_Pause = %#x Port_VLAN = %#x Rx_Flowthresh = %#x RxGoodFrames = %#x RxBroadcastFrames = %#x RxMulticastFrames = %#x RxPauseFrames = %#x RxCRCErrors = %#x RxAlignCodeErrors = %#x RxOversizedFrames = %#x RxJabberFrames = %#x RxUndersizedFrames = %#x RxFragments = %#x RxFilteredFrames = %#x RxOctets = %#x TxGoodFrames = %#x TxBroadcastFrames = %#x TxMulticastFrames = %#x TxPauseFrames = %#x TxDeferredFrames = %#x TxCollisionFrames = %#x TxSingleCollFrames = %#x TxMultCollFrames = %#x TxExcessiveCollisions = %#x TxLateCollisions = %#x TxUnderrun = %#x TxCarrierSenseErrors = %#x TxOctets = %#x Reg64octetFrames = %#x Reg65t127octetFrames = %#x Reg128t255octetFrames = %#x Reg256t511octetFrames = %#x Reg512t1023octetFrames = %#x Reg1024tUPoctetFrames = %#x NetOctets = %#x RxSofOverruns = %#x RxMofOverruns = %#x RxDmaOverruns = %#x MacAddr_Lo = %#x MacAddr_Hi = %#x QueueInfo = %#x MacIndex = %#x Half eth%d: Link State: %s Phy %d, Speed = %s, Duplex = %s eth%d: Link State: DOWN Error : Buffer Overflow Use "echo 0 > cpmac_stat" to reset the statistics Resetting statistics for CPMAC interface. Error clearing statistics for %s as Interface is down: <3>cpmac_p_reset_statistics: Error clearing statistics in DDC for %s Error: Unknown operation on cpmac statistics Use "echo 0 > cpmac_stats" to reset the statistics Cpmac %d, Address %lx Transmit Stats Tx Valid Bytes Sent :%u Good Tx Frames (Hardware) :%u Good Tx Frames (Software) :%lu Good Tx Broadcast Frames :%u Good Tx Multicast Frames :%u Pause Frames Sent :%u Collisions :%u Tx Error Frames :%lu Carrier Sense Errors :%u Receive Stats Rx Valid Bytes Received :%u Good Rx Frames (Hardware) :%u Good Rx Frames (Software) :%lu Good Rx Broadcast Frames :%u Good Rx Multicast Frames :%u Pause Frames Received :%u Rx CRC Errors :%u Rx Align/Code Errors :%u Rx Jabbers :%u Rx Filtered Frames :%u Rx Fragments :%u Rx Undersized Frames :%u Rx Overruns :%u Rx Unknown Protocols :%u <3>DDA_cpmac_control_cb: TX Host Error. Transmit Stopped %s <3>DDA_cpmac_control_cb: RX Host Error. Receive Stopped %s Half Duplex Full Duplex 10 Mbps 100 Mbps NO LINK Linked %s, Inst %d, PhyNum %d, %s, %s, %s <7>Cpmac: Unhandled ioctl code %d in DDA_cpmac_control_cb <3>%s error: Error %08X from CPMAC DDC TX Channel Open(()) <3>%s error: Error %08X from CPMAC DDC TX Inframode Channel Open(()) <3>%s error: Error %08X from CPMAC DDC RX Inframode Channel Open(()) <3>%s error: Error %08X from CPMAC DDC RX Channel Open(()) <3>%s error: Error %08X from CPMAC DDC Open() 08.00.28.32.06.0%d Cpmac: Error getting mac from Boot enviroment for %s Cpmac: Using default mac address: %s Pass kernel parameter ethaddr%d=xx.xx.xx.xx.xx.xx to set mac address <7>iCfg->instId=%d iCfg->baseAddress=%08X iCfg->TxIntrLine=%d iCfg->RxIntrLine=%d iCfg->CPMACBusFrequency=%d speed=%d duplex=%d iCfg->rxCfg.promiscousEnable=%d iCfg->rxCfg.broadcastEnable=%d iCfg->rxCfg.multicastEnable=%d iCfg->rxCfg.maxRxPktLength=%d txChCfg->numBD=%d txChCfg->serviceMax=%d rxChCfg->numBD=%d rxChCfg->serviceMax=%d extra=%d iCfg->mdioBaseAddress=%08X iCfg->mdioResetLine=%d iCfg->MdioBusFrequency=%d iCfg->MdioClockFrequency=%d iCfg->PhyMask=%08X iCfg->MdioTickMSec=%d iCfg->rxMaxFrags=%d tx_ch_cfg->cppi4TxChInfo.chnum=%d rx_ch_cfg->cppi4RxChInfo.chnum=%d rx_ch_cfg->cppi4RxChInfo.defDescType=%d tx_ch_cfg->numTxQs=%d tx_ch_cfg->cppi4TxChInfo.txInQueue [%d].qMgr=%d tx_ch_cfg->cppi4TxChInfo.txInQueue [%d].qNum=%d tx_ch_cfg->cppi4TxChInfo.txCompQueue.qMgr=%d tx_ch_cfg->cppi4TxChInfo.txCompQueue.qNum=%d rx_ch_cfg->cppi4RxChInfo.u.hostPktCfg.fdbQueue [%d].qMgr=%d rx_ch_cfg->cppi4RxChInfo.u.hostPktCfg.fdbQueue [%d].qNum=%d rx_ch_cfg->cppi4RxChInfo.rxCompQueue.qMgr=%d rx_ch_cfg->cppi4RxChInfo.rxCompQueue.qNum=%d txChCfg->cppi4TxChInfo.accuCfg.accChanNum=%d rxChCfg->cppi4RxChInfo.accuCfg.accChanNum=%d txChCfg->accVecNum=%d rxChCfg->accVecNum=%d iCfg.cppi4InitCfg.resetLine=%d rx_ch_cfg->cppi4RxChInfo.dmaNum=%d tx_ch_cfg->cppi4TxChInfo.dmaNum=%d <3>Cpmac: Could not fetch configuration information for instance %d <3>Cpmac: cpmac_dev_init:%d: Error %08X from DDC_cpmacCreateInstance() <3>Cpmac: cpmac_dev_init:%d: Error %08X from DDC Init() <3>%s error: cpmac_dev_init: device could not OPEN DDC <3>Cpmac: cpmac_dev_init_exit:%s: Error %08X from DDC Deinit() <3>Cpmac: cpmac_dev_init_exit:%s: Error %08X from DDC Delete Instance() <3>%s error: Error %08X from CPMAC DDC Close() <7>Device %s Closed. <3>Failed to read params (CPMAC_DDA_PRIV_FILTERING) from DDC for %s. <3>Failed to read params (CPMAC_DDA_PRIV_MII_READ) from DDC for %s. <3>Failed to get statistics (CPMAC_DDA_PRIV_GET_STATS) from DDC for %s. <3>Failed to clear statistics (CPMAC_DDA_PRIV_CLR_STATS) in DDC for %s. <3>%s CPMAC_DDA_ADD_RX_BD Capable only to add RX buffer <3>%s CPMAC_DDA_ADD_RX_BD Failed to add RX buffer <3>Failed to get statistics (TI_SIOCGINTFCOUNTERS) from DDC for %s. <3>Failed to get statistics (TI_SIOCGETHERCOUNTERS) from DDC for %s. <3>%s error: cpmac_dev_open: device could not OPEN DDC Cpmac Driver <3>Failed to register the irq %d for Cpmac %s. include/linux/netdevice.h <7>Started the network queue for %s. <7>Cpmac: Error while unloading ethernet device. p_dev is NULL! <7>Cpmac: Unloading %s io=%04x <3>Cpmac: cpmac_exit:%s: Error %08X from DDC Deinit() <3>Cpmac: cpmac_exit:%s: Error %08X from DDC Delete Instance() avalanche/cpmac_switch %s: Pkts pending... pdsp_rsp_status: Timeout waiting for PDSDP(%d). %s: Unsupported payload type %d for vpid type %d Non Ethernet 1st level lookup (L2) is NOT supported. ERROR: Ingress fields reqd for egress L3 chksum ERROR: Ingress-Egress L3/L4 Packet type mismatch (%d!=%d). ERROR: Unsupported egress L3/L4 packet type (%d). %s: ***Error: session %d does not exist. Failed to destroy session @%#x Minimum required egress header not provided (%#x != %#x). %s: ERROR - Unsupported payload type %d for vpid type %d ERROR: Unsupported egress L2 packet type (%d). ERROR: Required L2 header information not provided for routable session. %s: ***Error: Unable to put session %d in DIVERSION. %s: ***Error: LUT update for session %d FAILED. %s: ***Error: session %d already exists or being created. PDSP(%d) IRAM check failed drivers/net/avalanche_ppd/ti_ppd.c PDSP(%d) SRAM check failed Timeout waiting for reset complete for PDSDP(%d). %s: PAL_cppi4Init failed! Make sure CPPI Library issuccessfully initialized *before* initializing PPD %s: Event timer installation failed %s: PDSP event timer installation failed *** PDSP PMONs and session uptime won't be available Timeout waiting for reset complete for PDSDP(%d) Unsupported PDSP control option (%d) control reg val = %#x w%02d: 0x%08x {%8s : 0x%02x, %8s : 0x%02x, %8s : 0x%04x} byte1 Flags w%02d: 0x%08x {%8s : 0x%08x} IP Src IP Dst w%02d: 0x%08x {%8s : 0x%04x, %8s : 0x%04x} Src Port Dst Port L3 Chk L2 Chk Next EFR w%02d: 0x%08x {%8s : 0x%02x, %8s : 0x%02x, %8s : 0x%02x, %8s : 0x%02x} Priority Out VPID Framing L2 Size Dst Tag Fwd Q w%02d: 0x%08x {%8s : 0x%04x, %8s : 0x%02x, %8s : 0x%02x} Egr Dev 8023 Off TDox Ack L2 Ptr Mod Ptr ProtSpec In VPID IPv6 Ptr Next Col Prev Col EFR Ptr Ref Time Src IP W3 Src IP W2 Src IP W1 Src IP W0 Dst IP W3 Dst IP W2 Dst IP W1 Dst IP W0 Dst IP Src IP Flwlbl LS PPPoE Id Trafic Cl Proto Flbl MS Pkt Key Enables short1 Protocol Frag Dst LS Src LS Src MS Dst MS VLAN VID Eth Type DSID/TAG VLAN Pri In PID %08x: Session record dump for session id %d: IPv6 Address record dump: L2 (Ethernet) LUT dump: Unsupported type(%d) for L2 LUT L3 (IPv4) LUT dump: L3 (IPv6) LUT dump: Unsupported type(%d) for L3 LUT Egress record(%d) dump: L2 Header dump: Mod record(%d) dump: <3>[MTD%d]: setup read failed <3>[%s] %d, %d %d <3>[MTD%d]: setup write failed [MTD%d]: setup erase failed [MTD%d]: wait for erase failed <3>[MTD]: mtd %d ist no valid MTD <3>[MTD]: mtd %d ist not initialized <3>[MTD%d]: name = "%s" erase <3>[MTD%d]: erase: mtd size 0x%x block size 0x%x erase block count 0x%x <3>[MTD%d]: erase all blocks. <3>[MTD%d]: erase block %d(0x%x) from %d(0x%x) <3>[MTD%d]: erase block %d(0x%x) write_pattern <3>[MTD%d]: write_pattern: mtd size 0x%x block size 0x%x erase block count 0x%x <3>[MTD%d]: write pattern to all blocks. <3>[MTD%d]: write pattern to block %d(0x%x) from %d(0x%x) <3>[MTD%d]: write pattern to block %d(0x%x) verify_pattern <3>[MTD%d]: verify_pattern: mtd size 0x%x block size 0x%x erase block count 0x%x <3>[MTD%d]: verify pattern of all blocks. <3>[MTD%d]: verify pattern of block %d(0x%x) from %d(0x%x) err %04d:%04d %02x (exp %02x) <3>[MTD%d]: verify pattern of block %d(0x%x) <3>[MTD]: mtd erase |all <3>[MTD]: mtd write <3>[MTD]: mtd read [MTD%d]: callback erase %s dev: size erasesize name mtd%d: %8.8x %8.8x "%s" drivers/mtd/mtdcore.c <4>%s: unlock failed, writes may not work <5>Removing MTD device #%d (%s) with use count %d <5>MTD: MTD device with name "%s" not found. <5>MTD: Attempt to mount non-MTD device "%s" [%s] types=%s <5>%s partition parsing not available <5>%d %s partitions found on MTD device %s <5>Creating %d MTD partitions on "%s": <3>memory allocation error while creating partitions for "%s" <5>Moving partition %d: 0x%08x -> 0x%08x <5>0x%08x-0x%08x : "%s" (master-size:%d) <3>mtd: partition "%s" is out of reach -- disabled <4>mtd: partition "%s" extends beyond the end of device "%s" -- size truncated to %#x drivers/mtd/mtdpart.c <4>mtd: partition "%s" doesn't start on an erase block boundary -- force read-only <4>mtd: partition "%s" doesn't end on an erase block -- force read-only <5>Concatenating MTD devices: <5>(%d): "%s" <5>into device "%s" memory allocation error while creating concatenated device "%s" Incompatible device type on "%s" Incompatible device flags on "%s" Incompatible OOB or ECC data on "%s" memory allocation error while creating erase region list for device "%s" drivers/mtd/mtdconcat.c <5>Failed to find a non-bad block to check for RedBoot partition table <5>Searching for RedBoot partition table in %s at offset 0x%lx FIS directory <5>No RedBoot partition table detected in %s RedBoot <3>mtd: partition size too small (%lx) <3>mtd: no closing %c found in partition name <3>mtd: no partitions allowed after a fill-up partition <3>mtd: out of memory Partition_%03d <3>mtd: no mtd-id <3>mtd: bad character after partition (%c) <4>mtd: %s: partitioning exceeds flash size, truncating cmdlinepart mtd%dro <5>Can't allocate major number %d for Memory Technology Devices. <3>Error creating mtd class. drivers/mtd/mtd_blkdevs.c <4>Unable to register %s block device on major %d: %d &new->lock %s%c%c <4>mtdblock: erase of region [0x%lx, 0x%x] on "%s" failed &mtdblk->cache_mutex mtdblock <5>Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx) <5>Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx) <4>%s: kmalloc failed for CFI ident structure include/linux/mtd/cfi.h <6>%s: Found %d x%d devices at 0x%x in %d-bit bank <7>%s: Found an alias at 0x%x for the chip at 0x%lx cfi_probe %s Extended Query Table at 0x%4.4X <3>Failed to allocate memory ST Microelectronics <3> Unknown ST Microelectronics Extended Query version %c.%c. <3>Failed to allocate memory for MTD device <3>Failed to allocate memory for MTD erase region info <4>Sum of regions (%lx) != total size of set of interleaved chips (%lx) <7>%d: offset=0x%x,size=0x%x,blocks=%d <3>waiting for chip to be ready timed out in unlock <3>waiting for unlock to complete timed out. Xstatus = %lx, status = %lx. <3>waiting for chip to be ready timed out in lock <3>waiting for lock to complete timed out. Xstatus = %lx, status = %lx. <3>waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx <3>Chip not ready for buffer write. Xstatus = %lx <3>waiting for chip to be ready timed out in bufwrite <3>Chip not ready after erase suspended: status = 0x%lx <3>waiting for chip to be ready timed out in read. WSM status = %lx <3>waiting for chip to be ready timed out in erase <3>waiting for erase to complete timed out. Xstatus = %lx, status = %lx. <4>Status is not identical for all chips: 0x%lx. Merging to give 0x%02x <5>Chip reports improper command sequence: status 0x%x <4>Chip reports voltage low on erase: status 0x%x <7>Chip erase failed at 0x%08lx: status 0x%x. Retrying... <7>Chip erase failed at 0x%08lx: status 0x%x cfi_cmdset_0020 <5>using fwh lock/unlock method <4>%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table. <4>%s: Bad S29GL064N CFI data, adjust from 64 to 128 sectors <4>%s: Bad S29GL032N CFI data, adjust from 127 to 63 sectors <3>Waiting for chip to be ready timed out. <3>MTD %s(): chip not ready after erase suspend <3>MTD: put_chip() called with oldstate %d!! <4>MTD %s(): software timeout <3>Argh. Chip not in PM_SUSPENDED state upon resume() <4>Failed to allocate memory for MTD device Amd/Fujitsu <3>[%s:%d] Cannot read chip feature table... Probe failure! <3> Unknown Amd/Fujitsu Extended Query version %c.%c. <4>%s: CFI does not contain boot bank location. Assuming top. <4>%s: Swapping erase regions for broken CFI table. JEDEC <5>number of %s chips: %d <4>Failed to allocate memory for MTD erase region info <5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cfi_cmdset_0002 cfi_cmdset_%4.4X <5>Support for command set %04X not present drivers/mtd/chips/gen_probe.c <4>NOR chip too large to fit in mapping. Attempting to cope... <4>%s: kmalloc failed for CFI chip map <4>%s: kmalloc failed for CFI private structure <4>Reducing visibility of %ldKiB chip to %ldKiB <4>gen_probe: No supported Vendor Command Set found <5>Probe at base(0x%08x) past the end of the map(0x%08lx) <4>MTD %s(): Unsupported device type %d <6>Found: %s <7>%s: Found different chip or no chip at all (mfr 0x%x, id 0x%x) at 0x%x jedec_probe AMD AM29F032B AMD AM29LV160DT AMD AM29LV160DB AMD AM29LV400BB AMD AM29LV400BT AMD AM29LV800BB AMD AM29DL800BB AMD AM29DL800BT AMD AM29F800BB AMD AM29LV800BT AMD AM29F800BT AMD AM29F017D AMD AM29F016D AMD AM29F080 AMD AM29F040 AMD AM29LV040B AMD AM29F002T AMD AM29SL800DT AMD AM29SL800DB Atmel AT49BV512 Atmel AT29LV512 Atmel AT49BV16X Atmel AT49BV16XT Atmel AT49BV32X Atmel AT49BV32XT Eon EN29SL800BT Eon EN29SL800BB Fujitsu MBM29F040C Fujitsu MBM29F800BA Fujitsu MBM29LV650UE Fujitsu MBM29LV320TE Fujitsu MBM29LV320BE Fujitsu MBM29LV160TE Fujitsu MBM29LV160BE Fujitsu MBM29LV800BA Fujitsu MBM29LV800TA Fujitsu MBM29LV400BC Fujitsu MBM29LV400TC Hyundai HY29F002T Intel 28F004B3B Intel 28F004B3T Intel 28F400B3B Intel 28F400B3T Intel 28F008B3B Intel 28F008B3T Intel 28F008S5 Intel 28F016S5 Intel 28F008SA Intel 28F800B3B Intel 28F800B3T Intel 28F016B3B Intel I28F016S3 Intel 28F016B3T Intel 28F160B3B Intel 28F160B3T Intel 28F320B3B Intel 28F320B3T Intel 28F640B3B Intel 28F640B3T Intel 82802AB Intel 82802AC Macronix MX29LV040C MXIC MX29LV160T NEC uPD29F064115 MXIC MX29LV160B Macronix MX29F040 Macronix MX29F016 Macronix MX29F004T Macronix MX29F004B Macronix MX29F002T PMC Pm49FL002 PMC Pm49FL004 PMC Pm49FL008 LH28F640BF SST 39LF512 SST 39LF010 SST 29EE020 SST 29LE020 SST 39LF020 SST 39LF040 SST 39SF010A SST 39SF020A SST 49LF040B SST 49LF004B SST 49LF008A SST 49LF030A SST 49LF040A SST 49LF080A SST 39LF160 SST 39VF1601 SST 36VF3203 ST M29F800AB ST M29W800DT ST M29W800DB ST M29W400DT ST M29W400DB ST M29W160DT ST M29W160DB ST M29W040B ST M50FW040 ST M50FW080 ST M50FW016 ST M50LPW080 ST M50FLW080A ST M50FLW080B Toshiba TC58FVT160 Toshiba TC58FVB160 Toshiba TC58FVB321 Toshiba TC58FVT321 Toshiba TC58FVB641 Toshiba TC58FVT641 Winbond W49V002A map_ram <5>maprom_write called map_rom drivers/mtd/maps/map_funcs.c Generic platform RAM MTD, (c) 2004 Simtec Electronics <3>%s %s: no platform data supplied <3>%s %s: no memory for flash info <3>%s %s: no memory resource specified <3>%s %s: failed to request memory region <3>%s %s: failed to ioremap() region <3>%s %s: failed to probe for map_ram <3>%s %s: add_mtd_device() failed <6>%s %s: registered mtd device <3>block2mtd: parameter too long <3>block2mtd: too many arguments <3>block2mtd: no argument <3>block2mtd: device name too long <3>block2mtd: illegal erase size <3>block2mtd: error: cannot open device %s <3>block2mtd: attempting to use an MTD device as a block device &dev->write_mutex block2mtd: %s <6>block2mtd: mtd%d: [%s] erase_size = %dKiB [%d] <3>block2mtd: erase failed err = %d <6>block2mtd: mtd%d: [%s] removed spi_write_then_read not successful! <0>%s:%s():line %d : failed <3>%s %s: error %d reading SR <0>%s:%s():line %d : error %d reading SR *** Serial flash is stuck on busy state, rebooting the system! ** Serial Flash [Bus:%1d CS:%1d] : %s %dKB, %3d sectors each %3dKB <3>[%s] create sfl_sema <3>ERROR: create sfl_sema <0>%s:%s():line %d : wait_till_ready failed <0>%s:%s():line %d : write_status_reg failed No device found <0>%s:%s():line %d : invalid length <0>%s:%s():line %d : length exceeds partition size <0>%s:%s():line %d : ERROR: Writing in locked region BPx = 0x%0x <0>%s:%s():line %d : Invalid length <0>%s:%s():line %d : Argument exceeds partitions size <3>[%s] invalid address (or) length <3>[%s] invalid address (or) length, exceeds partition size <3>[%s]ERROR: in line=%u <3>[%s]ERROR: Erasing in locked region BPx = 0x%0x <3>[%s] ERROR=%i s25fl004a s25fl008a s25fl016a s25fl032a s25fl064a s25fl128p m25fl128p m25fl64p mx25l1605 mx25l3205 mx25l6405 mx25l12805 w25q64bv w25q128bv find_jffs2 MODALIAS=%s <3>%s %s: cannot alloc spi_device <3>%s %s: cs%d >= max %d %s.%u <3>%s %s: chipselect %d already in use <3>%s %s: can't %s %s, status %d setup drivers/spi/spi.c spi%u spi_master drivers/spi/spi_bitbang.c <3>%s %s: queue didn't empty [Avalanche SPI] Not Enough Memory SPI frame length supplied is more than supported length [SPI Bitbang] Kmalloc failed [SPI] -> Slave device speed not set correctly. Trying with %dHz <6>%s: AVALANCHE SPI Controller driver at base=0x%p, phys=%#lx, virt=0x%p, irq=%d <3>[SPI] -> Word complete not set for a long time even after busy bit is cleared, status=%x <3>input: failed to attach handler %s to device %s, error: %d handlers bus/input N: Number=%ld Name=%s Minor=%d B: %s= %lx%s I: Bus=%04x Vendor=%04x Product=%04x Version=%04x N: Name="%s" P: Phys=%s S: Sysfs=%s U: Uniq=%s H: Handlers= <3>input: unable to register input_dev class <3>input: unable to register char major %d drivers/input/input.c input:b%04Xv%04Xp%04Xe%04X- input%ld Unspecified device <6>input: %s as %s <3>input_set_capability: unknown type %u (code %u) PRODUCT=%x/%x/%x/%x NAME="%s" PHYS="%s" UNIQ="%s" KEY= REL= ABS= MSC= LED= SND= MODALIAS= &dev->mutex capabilities phys uniq bustype vendor product <3>ff-core: cannot allocate device without any effects &ff->mutex &mousedev->mutex mice mouse%d <6>mice: PS/2 mouse device common for all mice <3>mousedev: no more free mousedev devices mousedev i2c: MODALIAS=%s%s <3>%s %s: Invalid block write size %d <3>%s %s: Unsupported transaction %d <4>%s %s: Invalid probe address 0x%02x <4>%s %s: Client creation failed at 0x%x (%d) <3>%s %s: client_unregister [%s] failed, client not detached %d-%04x <3>%s %s: Failed to attach i2c client %s at 0x%02x (%d) <3>%s %s: can't unregister devices with legacy drivers drivers/i2c/i2c-core.c <4>%s %s: client_unregister [%s] failed <3>%s %s: detach_adapter failed for driver [%s] <3>%s %s: detach_client failed for client [%s] at 0x%02x <3>%s %s: detach_adapter failed (%d) for driver [%s] <4>i2c-core: driver [%s] is confused <3>%s %s: detach_client failed for client [%s] at address 0x%02x <3>%s %s: Probing not supported <4>%s %s: Invalid 7-bit address 0x%02x <3>%s %s: %s detection function provided no name for 0x%x <3>%s %s: Failed creating %s at 0x%02x <4>%s %s: SMBus Quick command not supported, can't probe for chips &adap->bus_lock &adap->clist_lock i2c-%d <3>i2c-core: can't create i2c%d-%04x i2c-adapter <3>i2c-dev: Out of device minors (%d) i2c-dev %d <6>i2c /dev entries driver i2c-dev <3>%s: Driver Initialisation failed drivers/i2c/i2c-dev.c dev_driver <6>Initialize Avalanche IIC-over-VLYNQ adapter module <3>Invalid mode defaulting to Interrupt mode <3>Invalid clock defaulting to 400KHz <3>Invalid spike filter defaulting to 0 &(iic_avalanche_priv_data.avalanche_i2c_lock) TI IIC <3>request_irq failed in iic_hw_resrc_init <3>TI I2C Bus :i2c_avalanche_bus_fail <3> Timeout occured in function %s ERROR IN FUNCTION %s status =0x%x ERROR IN FUNCTION %s Received NULL argument in function %s Exiting Device found busy Exiting initializatio Initialization failed iic_xfer: Timeout waiting for host not busy In function %s Ten bit address not supported by Hardware <7>kcapi: card [%03d] suspend <7>kcapi: card [%03d] resume <5>CAPI Subsystem Rev %s <4>%s: cannot get card resources b1isa t1isa <3>kcapi: driver not loaded. <3>kcapi: driver has no add card function. <7>kcapi: load: no load function <7>kcapi: load: invalid parameter: length of t4file is %d ? <7>kcapi: load: invalid parameter: dataptr is 0 <6>kcapi: load: contr=%d not in detect state <6>kcapi: contr [%03d] set trace=%d <3>kcapi: driver "%s" not loaded. <3>kcapi: driver "%s" has no add card function. <3>kcapi: manufacturer command %d unknown. <7>kcapi: put [%03d] id#%d %s len=%u <7>kcapi: put [%03d] %s <7>kcapi: put [%03d] id#%d %s len=%u cannot trace <7>kcapi: appl %d down &ap->recv_mtx <7>kcapi: appl %d up <3>kcapi: out of controller slots capi/controllers/%d <5>kcapi: Controller [%03d]: %s attached <7>kcapi: notify up contr %d <4>%s: invalid contr %d <7>kcapi: notify down contr %d <6>kcapi: controller [%03d] not active, got: %s <6>kcapi: controller [%03d] not active, cannot trace <7>kcapi: got [%03d] id#%d %s len=%u <7>kcapi: got [%03d] %s <7>kcapi: got [%03d] id#%d %s len=%u, cannot trace <3>kcapi: handle_message: applid %d state released (%s) <3>kcapi: handle_message: applid %d state released (%s) cannot trace <5>kcapi: card [%03d] "%s" ready. <5>kcapi: card [%03d] down. <5>kcapi: Controller [%03d]: %s unregistered $Revision: 1.1.2.8 $ CONFIG_CAPI_TRACE not enabled ALERT_REQ DISCONNECT_REQ LISTEN_REQ INFO_REQ FACILITY_REQ SELECT_B_PROTOCOL_REQ DISCONNECT_B3_REQ DATA_B3_REQ RESET_B3_REQ ALERT_CONF DISCONNECT_CONF LISTEN_CONF MANUFACTURER_REQ INFO_CONF FACILITY_CONF SELECT_B_PROTOCOL_CONF DISCONNECT_B3_CONF DATA_B3_CONF RESET_B3_CONF CONNECT_ACTIVE_IND DISCONNECT_IND MANUFACTURER_CONF INFO_IND FACILITY_IND CONNECT_B3_ACTIVE_IND DISCONNECT_B3_IND DATA_B3_IND RESET_B3_IND CONNECT_B3_T90_ACTIVE_IND CONNECT_ACTIVE_RESP DISCONNECT_RESP MANUFACTURER_IND INFO_RESP FACILITY_RESP CONNECT_B3_ACTIVE_RESP DISCONNECT_B3_RESP DATA_B3_RESP RESET_B3_RESP CONNECT_B3_T90_ACTIVE_RESP MANUFACTURER_RESP <3>capilib_data_b3_req: ncci 0x%x not found <3>capilib_data_b3_conf: ncci 0x%x not found <3>kcapi: msgid %hu ncci 0x%x not on queue <6>kcapi: appl %d ncci 0x%x forced down <6>kcapi: appl %d ncci 0x%x down <3>capilib_free_ncci: ncci 0x%x not found <4>capilib_new_ncci: no memory. <3>capi_new_ncci: winsize %d too big <7>%s: kcapi: appl %d ncci 0x%x up capi/driver capi/controller capi/contrstats capi/applications capi/applstats capi/controllers capi %u %lu %lu %lu %lu %u %d %d %d %d %lu %lu %lu %lu %d %-10s %-8s %-16s %s running MapperId %d not registered MapperId %u (Host %u ) NCCIs %u B3BlockSize %u WindowSize %u NCCI 0x%8x WindowSize %u/%u Rx[%c%c%c%c%c%c%c%c] Tx[%c%c%c%c%c%c%c%c] <3>Len(%u) != CM_BufSize(%u) <3>[capi_oslib] CA_BLOCKSIZE: MapperId == 0 invallid <3>[capi_oslib] CA_BLOCKSIZE: MapperId %d registered <3>[capi_oslib] CA_WINDOWSIZE: MapperId == 0 invallid <3>[capi_oslib] CA_WINDOWSIZE: MapperId %d registered <3>[capi_oslib] CA_APPLDATA: MapperId == 0 invallid <3>[capi_oslib] CA_APPLDATA: MapperId %d registered <3>[capi_oslib] CA_PUT_MESSAGE: MapperId %d not registered <3>receive from CapiReceivePipe failed <3>[capi_oslib] CA_FREE_DATA_B3_REQ: MapperId == %u invallid <3>[capi_oslib] CA_FREE_DATA_B3_REQ: MapperId %d not registered <3>optain semaphore A->Sema failed <3>[capi_oslib] CA_FREE_DATA_B3_REQ: MapperId %d not registered (released) <3>optain semaphore A->Sema failed <3>[capi_oslib] CA_NEW_DATA_B3_REQ: MapperId %d NCCI %x not found <3>[capi_oslib] CA_NEW_DATA_B3_REQ: ERROR: MapperId %d NCCI %x: Illegal Call to CA_NEW_DATA_B3_REQ <3>[capi_oslib] CA_NEW_DATA_B3_IND: MapperId %d not registered (released) <3>[capi_oslib] CA_NEW_DATA_B3_IND: MapperId %u, NCCI %u no buffer left <3>[capi_oslib] CA_NEW_NCCI: MapperId == %u invallid <3>[capi_oslib] CA_NEW_NCCI: MapperId %d not registered <3>[capi_oslib] CA_NEW_NCCI: MapperId %d not registered (released) <3>[capi_oslib] CA_NEW_NCCI: MapperId %u, NCCI %u already exists <3>[capi_oslib] capioslib: not initialized <3>[capi_oslib] capioslib: cm_ctrl_tasklet already initialized, ignore reinit! capi_oslib <3>[capi_oslib] irq: %d registration failed <3>[capi_oslib] malloc failed <3>receive from LA->Pipe failed <3>[capi_oslib] [LOCAL_CAPI_RELEASE] CAPI for source=%u not installed <3>[capi_oslib] [LOCAL_CAPI_RELEASE] illegal ApplId %d <3>down LocalCapiReleaseSema failed <3>down LocalCapiRegisterSema failed <3>delete LA->Pipe failed <3>[capi_oslib] [LOCAL_CAPI_GET_MESSAGE_WAIT_QUEUE] CAPI for source=%u not installed <3>[capi_oslib] [LOCAL_CAPI_GET_MESSAGE_WAIT_QUEUE] illegal ApplId %d <3>[capi_oslib] [LOCAL_CAPI_REGISTER_B3_BUFFER] CAPI for source=%u not installed <3>[capi_oslib] [LOCAL_CAPI_REGISTER_B3_BUFFER] illegal ApplId %d <3>[capi_oslib] CAPI for source=%u not installed %s-%s-%u <3>create applid receive pipe failed <3>[capi_oslib] LOCAL_CAPI_MESSAGE(%s, %u) Send_To_Pipe(LA->Pipe, Msg, %u, Suspend) failed, Status = %d drivers/isdn/capi_oslib/local_capi.c NoCAPI 0004711 Illegal AVM Berlin no pipe <3>[capi_oslib] [Capi_Pipe_Status] Pipe=0x%p noname Pipe(%s) wr=%d rd=%d free=%d size=%d <3>[capi_oslib] [HOST_REGISTER_B3_BUFFER] too little buffers <3>[capi_oslib] optain semaphore Register_Release_Sema failed <3>[capi_oslib] optain semaphore A->Sema failed <3>[capi_oslib] send to CapiReceivePipe failed <3>[capi_oslib] optain register_release_sema failed <3>[capi_oslib] HOST_REGISTER: source %u ApplId %u: already there (MapperId %u) <3>[capi_oslib] HOST_REGISTER: source %u ApplId %u: no free entry <3>[capi_oslib] HOST_REGISTER: source %u MapperId %u: not free <3>[capi_oslib] optain A->Sema failed <3>[capi_oslib] HOST_REGISTER: no memory for CapiDataStruct <3>[capi_oslib] HOST_REGISTER: no memory for NCCIData <3>[capi_oslib] [HOST_INIT] %s: no memory for ApplData <3>[capi_oslib] [HOST_INIT] %s: no memory for CapiPutMessageQueue (%u bytes) P_Capi <3>[capi_oslib] create receive pipe failed <6>driver params overwritten io_addr=0x%x irq_num=%u <3>[capi_oslib] ERROR no version information capitransp <3>[capi_oslib] %s down_interruptible() failed <3>[capi_oslib] [%s]: capi_oslib_open: open O_APPEND not supported <3>[capi_oslib] not jet activated <3>[capi_oslib] down_interruptible() failed <3>[capi_oslib] %s: capi_oslib_open: open malloc failed <3>[capi_oslib] [write] not registered <3>[capi_oslib] %s: capi_oslib_write: write_lengh < %u capi_oslib_write <3>[capi_oslib] [write] wrong message buffer <3>[capi_oslib] [write] data b3 buffer overflow <3>[capi_oslib] [write] data b3 buffer too small <3>[capi_oslib] [write] copy_from_user failed <3>[capi_oslib] CAPI_PUT_MESSAGE failed error 0x%x <3>[capi_oslib] [read] not registered <3>[capi_oslib] [read] down_interruptible() failed <3>[capi_oslib] [read] buffer too short <3>[capi_oslib] read_buffer to small <3>[capi_oslib] [ioctl] type not 'C', was type %d, nr %d, size %d from %s <3>[capi_oslib] [ioctl] size invalid, was %d from %s <3>[capi_oslib] [ioctl] %s:%d failed from %s <3>[capi_oslib] [ioctl] args null for ioctl nr %d, size %d from %s <3>[capi_oslib] [capi_register] failed status=%d no user space buffer length <3>[capi_oslib] [capi_register] failed user space buffer too small (should be %u is %u) <3>[capi_oslib] already registered (ApplId=%u) ! <3>[capi_oslib] capi_register failed status=%d <3>[capi_oslib] capi_get_version failed status=%d <3>[capi_oslib] capi_get_profile failed status=%d <3>[capi_oslib] capi_get_manufacturer_cmd failed status=%d <3>[capi_oslib] capi_installed <3>[capi_oslib] capi_installed failed status=%d <3>[capi_oslib] [ioctl] nr 0x%x not supported <3>[capi_oslib] [capi_oslib] register_chrdev_region failed: reason %d! <3>[capi_oslib] [capi_oslib] cdev_alloc failed! <3>[capi_oslib] [capi_oslib] cdev_add failed! <3>[capi_oslib] [release_b3_buffer] callback context=0x%p <3>[capi_oslib] [map_register_block] could not map 0x%p (len %u, %u pages) to kernel memory <3>[capi_oslib] [register_user_space_blocks] no memory ! <3>[capi_oslib] [] out of memory <3>[capi_oslib] [map_register_block] ERROR: page not mapable <3>[capi_oslib] [map_register_block] ERROR: %u b3 blocks %u pages avail (too little) <3>[capi_oslib] memory page no present, while %s ! _do_nothing_ <3>[capi_oslib] [data_b3_req] ALLOC Error: buffer not in one page ERR_NCPI_ignored ERR_NoError ERR_Flags_ignored ERR_AlertAlreadySend ERR_ToManyApplications ERR_BlockToSmall ERR_Buffer64k ERR_MessageToSmall ERR_MaxLogicalConnections ERR_1006_Reserved ERR_SendBusy ERR_ResourceError ERR_No_CAPI ERR_No_External ERR_Only_External ERR_IllegalApplId ERR_IllegalMessage ERR_QueueFull ERR_QueueEmpty ERR_MessageLost ERR_UnknownNotification ERR_InternalBusy ERR_OS_Resource ERR_No_CAPI_11 ERR_No_External_11 ERR_Only_External_11 ERR_MessageNotSupportedInCurrentState ERR_IllegalController/PLCI/NCCI ERR_OutOfPLCI ERR_OutOfNCCI ERR_OutOfLISTEN ERR_OutOfFaxResources ERR_IllegalMessageParameterCoding ERR_B1ProtocolNotSupported ERR_B2ProtocolNotSupported ERR_B3ProtocolNotSupported ERR_B1ProtocolParameterNotSupported ERR_B2ProtocolParameterNotSupported ERR_B3ProtocolParameterNotSupported ERR_BProtocolCombinationNotSupported ERR_NCPINotSupported ERR_CIPValueUnknown ERR_FlagsNotSupported ERR_FacilitiesNotSupported ERR_DataLengthNotSupported ERR_ResetProcedureNotSupported ERR_SupplServicesNotSupported ERR_RequestNotAllowedInThisState ERR_AnotherApplicationGotCall ERR_L2CAP_No_Error ERR_L2CAP_PSM_Not_Supported ERR_L2CAP_Security_Block ERR_L2CAP_No_Resources ERR_L2CAP_Timeout ERR_L2CAP_QoS_Failure ERR_RFCOMM_Protocol_Error ERR_RFCOMM_Remote_Protocol_Error ERR_RFCOMM_Timeout ERR_HigherLayer_Unknown ERR_NameResolution_Failed ERR_ConnRefused_Role_Reject ERR_unknown [Capi] Pipe=%s <3>[capi_oslib] illegal applid 0 O->ApplId %u ---> MapperId %u [ApplId %u] LastErr %s Mode=%s Pipe=%s B3BlockSize=%u B3WindowSize=%u MaxNCCIs=%u MessageBufferSize=%u SOURCE_UNKNOWN SOURCE_PTR_CAPI SOURCE_DEV_CAPI SOURCE_SOCKET_CAPI SOURCE_KERNEL_CAPI SOURCE_ANZAHL <5>capi_oslib: device %s gone. cpmac0 <5>capi_oslib: device %s now there. <3>capi_oslib: recv: skb_share_check failed <3>capi_oslib: recv: skb_copy failed <3>capi_oslib: recv: packet too small <3>capi_oslib: got APPL_CONT or _END w/o conn! <4>capi_oslib: recv: conn %d lost packet(s)! <3>capi_oslib: non-msg type only supported for RCAPI_TYPE_APPL! <4>capi_oslib: send profile but no dev! <3>capi_oslib: cannot allocate skb! <3>capi_oslib: dev_queue_xmit()=%d <3>capi_oslib: unknown type2 %d <4>capi_oslib: got msg of type RCAPI_TYPE_RESERVED <4>capi_oslib: got ping but have no dev! <3>capi_oslib: recv: type %d not implemented <3>capi_oslib: recv: skb_linearize failed <3>capi_oslib: recombine_buffer too small! <3>capi_oslib: received B3Msg of len=%d too big, dropping. <4>capi_oslib: send data conf but no dev! <4>capi_oslib: send register response but no dev! <4>capi_oslib: register but conn %d already has ApplId %d <3>capi_oslib_socket_put got ERR_OS_Resource for ApplId %d, Len=%d! <3>capi_oslib: kmalloc failed <3>capi_oslib: recombine buffer too small! <4>capi_oslib: drop msg, no dev capi_remote_put &per_cpu(cpu_policy_rwsem, cpu) performance powersave powersave drivers/cpufreq/cpufreq.c <7>%s: cpufreq-core unregistering driver %s saving %lu as reference value for loops_per_jiffy; freq is %u kHz scaling loops_per_jiffy to %lu for frequency %u kHz <4>%s governor failed, too long transition latency of HW, fallback to %s governor __cpufreq_governor for CPU %u, event %u last reference is dropped setting new policy for CPU %u: %u - %u kHz new min and max freqs are %u - %u kHz setting range governor switch starting governor %s failed governor: change or update limits trying to register driver %s no CPU initialized for driver %s driver %s up and running target for CPU %u: %u kHz, relation %u notification %u of frequency transition to %u kHz Warning: CPU frequency is %u, cpufreq assumed %u kHz. Warning: CPU frequency out of sync: cpufreq and timing core thinks of %u, is %u kHz. resuming cpu %u <3>cpufreq: resume failed in ->resume step on CPU %u <3>cpufreq: resume failed to assert current frequency is what timing core thinks it is. suspending cpu %u <3>cpufreq: suspend failed in ->suspend step on CPU %u <3>cpufreq: suspend failed to assert current frequency is what timing core thinks it is. %15s performance cpufreq_%s unregistering CPU %u waiting for dropping of refcount wait complete adding CPU %u initialization failed cpufreq setting policy failed initialization complete updating policy for CPU %u Driver did not initialize current freq handle_update for cpu %u called cpuinfo_cur_freq scaling_cur_freq cpuinfo_min_freq cpuinfo_max_freq scaling_min_freq scaling_max_freq affected_cpus related_cpus scaling_governor scaling_driver scaling_available_governors scaling_setspeed From : To : %9u %9u: %u %llu total_trans time_in_state trans_table setting to %u kHz because of event %u userspace saving cpu_cur_freq of cpu %u to be %u kHz cpufreq_set for cpu %u, freq %u kHz drivers/cpufreq/cpufreq_userspace.c managing cpu %u started (%u - %u kHz, currently %u kHz) managing cpu %u stopped limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz kondemand <3>Creation of kondemand failed sampling_rate_max sampling_rate_min sampling_rate ignore_nice_load powersave_bias conservative sampling_down_factor down_threshold freq_step freq-table clearing show_table for cpu %u setting show_table for cpu %u to %p request for target %u kHz (relation: %u) for cpu %u target is %u (%u kHz, %u) request for verification of policy (%u - %u kHz) for cpu %u verification lead to (%u - %u kHz) for cpu %u table entry %u is invalid, skipping table entry %u: %u kHz, %u index scaling_available_frequencies <6>oprofile: using timer interrupt. <7>WQ on CPU%d, prefer CPU%d buffer_watershed cpu_buffer_size cpu_type backtrace_depth pointer_size oprofilefs cpu%d sample_received sample_lost_overflow backtrace_aborted sample_invalid_eip sample_lost_no_mm sample_lost_no_mapping event_lost_overflow bt_lost_no_mapping <6>oprofile: using %s unit_mask <3>oprofile: CPU%u PMU still enabled when setup new event counter. CP15 PMU <3>oprofile: unable to request IRQ%u for MPCORE-EM arm/armv6 socket: sock_inode_cache <2>protocol %d >= NPROTO(%d) <6>NET: Registered protocol family %d sockets: used %d net/socket.c <6>NET: Unregistered protocol family %d 8021q dlci socket:[%lu] <3>sock_release: fasync list not empty! <7>sock_close: NULL inode <6>%s uses obsolete (PF_INET,SOCK_PACKET) <4>socket: no more sockets net-pf-%d sockfs protocols %-9s %-4s %-8s %-6s %-5s %-7s %-4s %-10s %s protocol sockets press maxhdr slab cl co di ac io in de sh ss gs se re sp bi br ha uh gp em %-9s %4u %6d %6d %-3s %6u %-3s %-10s %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c <2>%s: Can't create sock SLAB cache! <2>%s: Can't create request sock SLAB cache! <3>PROTO_INUSE_NR exhausted <7>%s: optmem leakage (%d bytes) detected. <4>process `%s' is using obsolete %s SO_BSDCOMPAT getsockopt <6>sock_set_timeout: `%s' (pid %d) tries to set negative timeout setsockopt net/core/request_sock.c <4>%s: received packets cannot be forwarded while LRO is enabled <4>bad partial csum: csum=%u/%u len=%u include/linux/skbuff.h net/core/skbuff.c <0>skb_under_panic: text:%p len:%d put:%d head:%p data:%p tail:%#lx end:%#lx dev:%s <0>skb_over_panic: text:%p len:%d put:%d head:%p data:%p tail:%#lx end:%#lx dev:%s skbuff_head_cache skbuff_fclone_cache net/core/datagram.c net/core/stream.c net/core/net_namespace.c <6>net_namespace: %zd bytes Could not setup the initial network namespace Error: Device %s has a packet handler 0x%p installed Error: Device %s has no packet handler installed Error: Device %s has an egress hook 0x%p installed Error: Device %s has no egress hook installed Error: Failed to allocate netdevice index net/core/sysctl_net_core.c wmem_max rmem_max wmem_default rmem_default dev_weight netdev_max_backlog message_cost message_burst optmem_max xfrm_aevent_etime xfrm_aevent_rseqth xfrm_larval_drop xfrm_acq_expires netdev_budget warnings somaxconn <5>%s: Dropping NETIF_F_SG since no checksum feature. <5>%s: Dropping NETIF_F_TSO since no SG feature. <3>%s: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. <3>%s: Dropping NETIF_F_UFO since no NETIF_F_SG feature. net/core/dev.c Error: Unable to initialize the HIL Core __dev_addr_discard: address leakage! da_users=%d ptype softnet_stat %08x %08x %08x %08x %08x %08x %08x %08x %08x Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed %6s:%8lu %7lu %4lu %4lu %4lu %5lu %10lu %9lu %8lu %7lu %4lu %4lu %4lu %5lu %7lu %10lu Type Device Function ALL %-8s %s%s%s%s+0x%lx [%p] dev%d <0>%s: failed to move %s to init_net: %d <4>dev_remove_pack: %p not found. <4>%s: promiscuity touches roof, set promiscuity failed, promiscuity feature of device might be broken. entered <6>device %s %s promiscuous mode dev=%s prom=%d old_prom=%d auid=%u uid=%u gid=%u ses=%u <4>%s: allmulti touches roof, set allmulti failed, allmulti feature of device might be broken. <7>%s: packet from %s stolen by %s <3>%s: hw csum failure. <2>protocol %04x is buggy, dev %s <2>Virtual device %s asks to queue packet! <2>Dead loop on virtual device %s, fix it urgently! <3>network todo '%s' but state %d <0>unregister_netdevice: waiting for %s to become free. Usage count = %d <7>unregister_netdevice: device %s/%p never was registered <3>%s: name change rollback failed: %d. <3>alloc_netdev: Unable to allocate device. <3>alloc_netdev: Unable to allocate tx qdiscs. <5>%s: mixed HW and IP checksum settings. <5>%s: mixed no checksumming and other settings. net/core/ethtool.c dev_mcast %-4d %-15s %-5d %-5d net/core/dst.c net/core/neighbour.c proto neigh entries allocs destroys hash_grows lookups hits res_failed rcv_probes_mcast rcv_probes_ucast periodic_gc_runs forced_gc_runs unresolved_discards %08x %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx NEIGH: BUG, double timer add, state is %x neigh_resolve_output: dst=%p neigh=%p neigh_parms_release: not found cannot create neighbour cache statistics cannot create neighbour proc dir entry cannot allocate neighbour cache hashes <3>NEIGH: Registering multiple tables for family %d <4>Destroying alive neighbour %p <4>Impossible event. <2>neighbour leakage <4>neigh: timer & !nud_in_timer mcast_solicit ucast_solicit app_solicit retrans_time base_reachable_time delay_first_probe_time gc_stale_time unres_qlen proxy_qlen anycast_delay proxy_delay locktime retrans_time_ms base_reachable_time_ms gc_interval gc_thresh1 gc_thresh2 gc_thresh3 <4>A link change request failed with some changes comitted already. Interface %s may have been left with an inconsistent configuration, please check. net/core/rtnetlink.c Unable to register rtnetlink message handler, protocol = %d, message type = %d rtnetlink_init: cannot allocate rta_buf rtnetlink_init: cannot initialize rtnetlink rtnl-link-%s %s%%d net/core/filter.c flow_cache NET: failed to allocate flow cache order %lu net/core/net-sysfs.c INTERFACE=%s IFINDEX=%d notpresent lowerlayerdown testing dormant wireless addr_len dev_id ifalias iflink ifindex features link_mode address broadcast carrier operstate tx_queue_len rx_packets tx_packets rx_bytes tx_bytes rx_errors tx_errors rx_dropped tx_dropped multicast collisions rx_length_errors rx_over_errors rx_crc_errors rx_frame_errors rx_fifo_errors rx_missed_errors tx_aborted_errors tx_carrier_errors tx_fifo_errors tx_heartbeat_errors tx_window_errors rx_compressed tx_compressed noise nwid crypt beacon net/core/fib_rules.c net/llc/llc_core.c <4>device type not supported: %d eth%d <7>%s: unable to resolve type %X addresses. <7>%s deferred output. It is buggy. net/sched/sch_generic.c <6>NETDEV WATCHDOG: %s (%s): transmit timed out <6>%s: activation failed <4>Dead loop on netdevice %s, fix it urgently! <4>BUG %s code %d qlen %d include/net/sch_generic.h sch_%s net/sched/sch_api.c psched cls_%s fifo netlink sk Eth Pid Groups Rmem Wmem Dump Locks %p %-3d %-6d %08x %-8d %-8d %p %d nlk->cb_mutex net-pf-%d-proto-%d net/netlink/af_netlink.c <3>Freeing alive netlink socket %p include/net/sock.h netlink_init: Cannot allocate nl_table net/netlink/attr.c <4>netlink: %d bytes leftover after parsing attributes. net/netlink/genetlink.c GENL: Cannot initialize generic netlink GENL: Cannot register controller: %d netfilter cannot create netfilter proc entry cannot initialize nf_queue cannot initialize nf_log %2lld NONE %2lld %s <4>dst cache overflow ip_dst_cache IP route cache <3>Unable to setup rt_secret_timer <3>Unable to create route proc files net/ipv4/route.c rt_acct entries in_hit in_slow_tot in_slow_mc in_no_route in_brd in_martian_dst in_martian_src out_hit out_slow_tot out_slow_mc gc_total gc_ignored gc_goal_miss gc_dst_overflow in_hlist_search out_hlist_search %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %-127s Iface Destination Gateway Flags RefCnt Use Metric Source MTU Window IRTT TOS HHRef HHUptod SpecDst %s %08lX %08lX %8X %d %u %d %08lX %d %u %u %02X %d %1d %08X%n <7>ip_rt_bug: %u.%u.%u.%u -> %u.%u.%u.%u, %s <4>Neighbour table overflow. <2>Bug in ip_route_input_slow(). Please, report <7>rt_bind_peer(0) @%p ipv4 gc_thresh max_size gc_min_interval gc_min_interval_ms gc_timeout redirect_load redirect_number redirect_silence error_cost error_burst gc_elasticity mtu_expires min_pmtu min_adv_mss net/ipv4/inetpeer.c inet_peer_cache <6>source route option %u.%u.%u.%u -> %u.%u.%u.%u <3>ip_frag_create: no memory left ! net/ipv4/ip_fragment.c <3>IP: queue_glue: no memory for gluing queue %p <6>Oversized IP packet from %u.%u.%u.%u. ipfrag_high_thresh ipfrag_low_thresh ipfrag_time ipfrag_secret_interval ipfrag_max_dist <2>ip_forward(): Argh! Destination lost! net/ipv4/ip_output.c <6>IP: frag: no memory for new fragment! <7>ip_finish_output2: No header cache and no neighbour! net/ipv4/inet_hashtables.c net/ipv4/inet_timewait_sock.c include/net/timewait_sock.h net/ipv4/inet_connection_sock.c include/net/request_sock.h tcp_bind_bucket TCP established TCP bind <6>TCP: Hash tables configured (established %d bind %d) net/ipv4/tcp.c <6>TCP: too many of orphaned sockets <6>recvmsg bug: copied %X seq %X <7>TCP(%s:%d): Application bug, race in MSG_PEEK. net/ipv4/tcp_input.c <7>Leak l=%u %d <7>Leak s=%u %d <7>Leak r=%u %d <7>Ack %u out of %u:%u <3>%s: Impossible, sk->sk_state=%d <7>prune_queue: c=%x <7>ofo packet was already received <7>ofo requeuing : rcv_next %X seq %X - %X <7>partial packet: rcv_next %X seq %X - %X <7>out of order segment: rcv_next %X seq %X - %X <6>tcp_parse_options: Illegal window scaling value %d >14 received. net/ipv4/tcp_output.c <7>tcp_send_synack: wrong queue state <7>retrans_out leaked. <6>Out of socket memory net/ipv4/tcp_timer.c <7>TCP: Treason uncloaked! Peer %u.%u.%u.%u:%u/%u shrinks window %u:%u. Repaired. <7>TCP: Treason uncloaked! Peer %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u/%u shrinks window %u:%u. Repaired. Failed to create the TCP control socket. %-*s sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode %4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %lu %lu %u %u %d%n %4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %u %d %p%n %4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %p%n include/net/tcp.h <7>TCP: drop open request from %u.%u.%u.%u/%u net/ipv4/tcp_ipv4.c <6>TCP: time wait bucket table overflow tcp_%s cubic <3>TCP %s does not implement required ops <5>TCP %s already registered <6>TCP %s registered net/ipv4/tcp_cong.c <6>%s forgot to set AF_INET in raw sendmsg. Fix it! sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode ref pointer drops %4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d include/net/udp.h sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode ref pointer drops %4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d%n <4>UDPLITE: partial coverage %d while full coverage %d requested <4>UDPLITE: coverage %d too small, need min %d <7>udp cork app bug 2 <7>udp cork app bug 3 <7>UDPLITE: zeroed checksum field <7>UDPLITE: bad csum coverage %d/%d -Lite <7>UDP%s: short packet: From %u.%u.%u.%u:%u %d/%d to %u.%u.%u.%u:%u <7>UDP%s: bad checksum. From %u.%u.%u.%u:%u to %u.%u.%u.%u:%u ulen %d <3>%s: Cannot register /proc! <2>%s: Cannot add UDP-Lite protocol. udplite IP address HW type Flags HW address Mask Device %u.%u.%u.%u %-16s 0x%-10x0x%-10x%s * %s 00:00:00:00:00:00 <7>trying to ucast probe in NUD_INVALID <7>arp_find is called with dst==NULL <7>ARP: arp called for own IP address arp_cache net/ipv4/icmp.c <6>Wrong address mask %u.%u.%u.%u from %s/%u.%u.%u.%u <6>ICMP: %u.%u.%u.%u: fragmentation needed and DF set. <6>ICMP: %u.%u.%u.%u: Source Route Failed. <4>%u.%u.%u.%u sent an invalid ICMP type %u, code %u error to a broadcast: %u.%u.%u.%u on %s net/ipv4/devinet.c Freeing alive in_device %p <7>inetdev_event: bug mc_forwarding accept_redirects secure_redirects shared_media send_redirects accept_source_route proxy_arp medium_id bootp_relay log_martians arp_filter arp_announce arp_ignore arp_accept disable_xfrm disable_policy force_igmp_version promote_secondaries ip_forward net/ipv4/af_inet.c <6>%s(): shifting inet->saddr from %u.%u.%u.%u to %u.%u.%u.%u <3>Attempt to unregister permanent protocol %d. <3>Attempt to override permanent protocol %d. <3>Ignoring attempt to register invalid socket type %d. <2>inet_init: Cannot add ICMP protocol <2>inet_init: Cannot add UDP protocol <2>inet_init: Cannot add TCP protocol <2>inet_init: Cannot add IGMP protocol Failed to create the ICMP control socket. <2>inet_init: Cannot init ipv4 mroute <2>inet_init: Cannot init ipv4 mibs net-pf-%d-proto-%d-type-%d Attempt to release TCP socket in state %d %p Attempt to release alive inet socket %p igmp mcfilter %3s %6s %10s %10s %6s %6s Device %3d %6.6s 0x%08x 0x%08x %6lu %6lu Idx Device : Count Querier Group Users Timer Reporter %d %-10s: %5d %7s %08X %5d %d:%08lX %d net/ipv4/igmp.c <4>fib_add_ifaddr: bug: prim == NULL <4>fib_del_ifaddr: bug: prim == NULL <4>fib_semantic_match bad type %#x net/ipv4/fib_semantics.c <4>Freeing alive fib_info %p net/ipv4/inet_fragment.c tcp_timestamps tcp_window_scaling tcp_sack tcp_retrans_collapse ip_default_ttl ip_no_pmtu_disc ip_nonlocal_bind tcp_syn_retries tcp_synack_retries tcp_max_orphans tcp_max_tw_buckets ip_dynaddr tcp_keepalive_time tcp_keepalive_probes tcp_keepalive_intvl tcp_retries1 tcp_retries2 tcp_fin_timeout tcp_tw_recycle tcp_abort_on_overflow tcp_stdurg tcp_rfc1337 tcp_max_syn_backlog ip_local_port_range igmp_max_memberships igmp_max_msf inet_peer_threshold inet_peer_minttl inet_peer_maxttl inet_peer_gc_mintime inet_peer_gc_maxtime tcp_orphan_retries tcp_fack tcp_reordering tcp_ecn tcp_dsack tcp_mem tcp_wmem tcp_rmem tcp_app_win tcp_adv_win_scale tcp_tw_reuse tcp_frto tcp_frto_response tcp_low_latency tcp_no_metrics_save tcp_moderate_rcvbuf tcp_tso_win_divisor tcp_congestion_control tcp_abc tcp_mtu_probing tcp_base_mss tcp_workaround_signed_windows tcp_slow_start_after_idle tcp_available_congestion_control tcp_allowed_congestion_control tcp_max_ssthresh udp_mem udp_rmem_min udp_wmem_min icmp_echo_ignore_all icmp_echo_ignore_broadcasts icmp_ignore_bogus_error_responses icmp_errors_use_inbound_ifaddr icmp_ratelimit icmp_ratemask Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT %s %08X %08X %04X %d %u %d %08X %d %u %u%n * %08X %08X %04X %d %u %d %08X %d %u %u%n net/ipv4/fib_hash.c <2>route.c: bad divisor %d! ip_fib_hash ip_fib_alias snmp netstat sockstat IcmpMsg: %sType%u Ip: Forwarding DefaultTTL Ip: %d %d Icmp: InMsgs InErrors In%s OutMsgs OutErrors Out%s Icmp: %lu %lu Tcp: %ld Udp: UdpLite: TcpExt: IpExt: TCP: inuse %d orphan %d tw %d alloc %d mem %d UDP: inuse %d mem %d UDPLITE: inuse %d RAW: inuse %d FRAG: inuse %d memory %d RtoAlgorithm RtoMin RtoMax MaxConn ActiveOpens PassiveOpens AttemptFails EstabResets CurrEstab InSegs OutSegs RetransSegs InErrs OutRsts RcvbufErrors SndbufErrors DestUnreachs TimeExcds ParmProbs SrcQuenchs Redirects Echos EchoReps Timestamps TimestampReps AddrMasks AddrMaskReps SyncookiesSent SyncookiesRecv SyncookiesFailed EmbryonicRsts PruneCalled RcvPruned OfoPruned OutOfWindowIcmps LockDroppedIcmps ArpFilter TWRecycled TWKilled PAWSPassive PAWSActive PAWSEstab DelayedACKs DelayedACKLocked DelayedACKLost ListenOverflows ListenDrops TCPPrequeued TCPDirectCopyFromBacklog TCPDirectCopyFromPrequeue TCPPrequeueDropped TCPHPHits TCPHPHitsToUser TCPPureAcks TCPHPAcks TCPRenoRecovery TCPSackRecovery TCPSACKReneging TCPFACKReorder TCPSACKReorder TCPRenoReorder TCPTSReorder TCPFullUndo TCPPartialUndo TCPDSACKUndo TCPLossUndo TCPLoss TCPLostRetransmit TCPRenoFailures TCPSackFailures TCPLossFailures TCPFastRetrans TCPForwardRetrans TCPSlowStartRetrans TCPTimeouts TCPRenoRecoveryFail TCPSackRecoveryFail TCPSchedulerFailed TCPRcvCollapsed TCPDSACKOldSent TCPDSACKOfoSent TCPDSACKRecv TCPDSACKOfoRecv TCPAbortOnSyn TCPAbortOnData TCPAbortOnClose TCPAbortOnMemory TCPAbortOnTimeout TCPAbortOnLinger TCPAbortFailed TCPMemoryPressures TCPSACKDiscard TCPDSACKIgnoredOld TCPDSACKIgnoredNoUndo TCPSpuriousRTOs TCPMD5NotFound TCPMD5Unexpected InBcastPkts OutBcastPkts Interface BytesIn PktsIn BytesOut PktsOut Flags Local Remote %2Zd %-10s %8ld %7ld %8ld %7ld %05X %08X %08X Group Origin Iif Pkts Bytes Wrong Oifs %08lX %08lX %-3d %8ld %8ld %8ld %2d:%-3d net/ipv4/ipmr.c ip_mrt_cache ip_mr_vif ip_mr_cache <4>mroute: pending queue full, dropping entries. pimreg tunl0 dvmrp%d <6>ipip init: can't register tunnel <6>ipip close: can't deregister tunnel tunl%%d net/ipv4/xfrm4_mode_beet.c <3>tunnel4 init: can't add protocol <3>tunnel64 init: can't add protocol <3>tunnel64 close: can't remove protocol <3>tunnel4 close: can't remove protocol net/ipv4/xfrm4_mode_transport.c net/ipv4/xfrm4_mode_tunnel.c net/ipv4/netfilter/ip_queue.c <3>ip_queue: error creating packet message <4>ip_queue: full at %d entries, dropping packets(s). Dropped: %d Peer PID : %d Copy mode : %hu Copy range : %u Queue length : %u Queue max. length : %u Queue dropped : %u Netlink dropped : %u <3>ip_queue: failed to create netlink socket ip_queue <3>ip_queue: failed to create proc entry <3>ip_queue: failed to register queue handler <4>ip_queue: error in mangle, dropping packet ip_queue_maxlen net/ipv4/inet_diag.c net/ipv4/xfrm4_policy.c <6>mcfw: IGMPv3 fast forwarding <3>mcfw: mcroute_extent: kmalloc failed <3>mcfw: group %u.%u.%u.%u: add source %u.%u.%u.%u failed <3>mcfw: filter_extent: kmalloc failed <3>mcfw: forward add: no memory (%s) <3>mcfw: forward add: id %d out of range <3>mcfw: forward del: id %d out of range <3>mcfw_multicast_forward_alloc_id(%s): name too long <3>mcfw_multicast_forward_alloc_id(%s): no id left <3>mcfw: group %u.%u.%u.%u: alloc failed deleted (all) removed timed out <3>mcfw: group %u.%u.%u.%u: %u.%u.%u.%u (%s:%d) alloc failed xfrm_dst_cache XFRM: failed to allocate byidx hash XFRM: failed to allocate bydst hash net/xfrm/xfrm_policy.c XFRM: Cannot allocate bydst/bysrc/byspi hashes. xfrm-mode-%d-%d xfrm-type-%d-%d net/xfrm/xfrm_state.c secpath_cache net/xfrm/xfrm_algo.c ecb(cipher_null) cipher_null cbc(des) cbc(des3_ede) des3_ede cbc(cast128) cast128 cbc(blowfish) blowfish cbc(serpent) serpent cbc(camellia) cbc(twofish) twofish rfc3686(ctr(aes)) digest_null hmac(md5) hmac(sha1) sha1 hmac(sha256) sha256 hmac(rmd160) rmd160 xcbc(aes) deflate lzjh rfc4106(gcm(aes)) rfc4309(ccm(aes)) <2>%s: Cannot create unix_sock SLAB cache! unix Num RefCount Protocol Flags Type St Inode Path %p: %08X %08X %08X %04X %02X %5lu net/unix/af_unix.c Attempt to release alive unix socket: %p &u->readlock net/unix/garbage.c max_dgram_qlen net/ipv6/af_inet6.c anycast6 %-4d %-15s %04x%04x%04x%04x%04x%04x%04x%04x %5d net/ipv6/ip6_output.c <7>IPv6: sending pkt_too_big to self <6>IPv6: frag: no memory for new fragment! <7>bug: IPv6 address leakage detected: ifa=%p net/ipv6/addrconf.c if_inet6 %04x%04x%04x%04x%04x%04x%04x%04x %02x %02x %02x %02x %8s Freeing alive inet6 device %p Timer is still running, when freeing ifa=%p Freeing alive inet6 address %p <7>%s: no IPv6 routers present <6>%s: duplicate address detected! <7>ADDRCONF: unspecified / multicast address assigned as unicast address on %s <6>ADDRCONF(NETDEV_UP): %s: link is not ready <6>ADDRCONF(NETDEV_CHANGE): %s: link becomes ready <7>init ip6-ip6: add_dev failed <7>init ip6-ip6: add_linklocal failed <7>init loopback: add_dev failed <2>IPv6 Addrconf: cannot initialize default policy table: %d. <4>addrconf: prefix option has invalid lifetime <7>addrconf: device %s not configured <7>IPv6 addrconf: prefix with wrong length %d hop_limit accept_ra autoconf dad_transmits router_solicitations router_solicitation_interval router_solicitation_delay force_mld_version max_addresses accept_ra_defrtr ra_defrtr_table accept_ra_pinfo proxy_ndp disable_ipv6 accept_dad net/ipv6/addrlabel.c ipv6_route rt6_stats %04x %04x %04x %04x %04x %04x %04x %04x%04x%04x%04x%04x%04x%04x%04x %02x 00000000000000000000000000000000 00 %04x%04x%04x%04x%04x%04x%04x%04x 00000000000000000000000000000000 %08x %08x %08x %08x %8s ip6_dst_cache net/ipv6/route.c <7>rt6_redirect: source isn't a valid nexthop for redirect target fib6_nodes net/ipv6/ip6_fib.c <7>fib6_clean_node: del failed: rt=%p@%p err=%d <3>ICMPv6 ND: %s() failed to allocate an skb. <3>ICMPv6 NDISC: Failed to initialize the control socket (err %d). <4>process `%s' is using deprecated sysctl (%s) net.ipv6.neigh.%s.%s; Use net.ipv6.neigh.%s.%s_ms instead. procfs <4>ICMPv6 NA: someone advertises our address on %s! ICMP6 RS: can't find in6 device <3>ICMPv6 RA: can't find inet6 device for %s. <3>ICMPv6 RA: %s() failed to add default route. <3>ICMPv6 RA: %s() got default router without neighbour. <7>%s(): trying to ucast probe in NUD_INVALID: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x <3>ICMPv6 Redirect: %s() failed to allocate an skb. ndisc_cache sl local_address remote_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode ref pointer drops %4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d <4>UDPLITE6: partial coverage %d while full coverage %d requested <4>UDPLITE6: coverage %d too small, need min %d <6>IPv6: udp checksum is 0 <7>UDP%sv6: short packet: %d/%u udp6 udplite6 net/ipv6/raw.c raw6 <7>ICMPv6 checksum failed [%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x > %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x] <7>icmpv6: msg of unknown type <3>Failed to initialize the ICMP6 control socket (err %d). <3>Failed to register ICMP6 protocol <7>icmpv6_send: addr_any/mcast source <7>icmpv6_send: no reply to icmp error <7>icmpv6_send: acast source mcfilter6 igmp6 <3>Failed to initialize the IGMP6 control socket (err %d). %3s %6s %32s %32s %6s %6s Multicast Address Source Address %3d %6.6s %04x%04x%04x%04x%04x%04x%04x%04x %04x%04x%04x%04x%04x%04x%04x%04x %6lu %6lu %-4d %-15s %04x%04x%04x%04x%04x%04x%04x%04x %5d %08X %ld net/ipv6/reassembly.c <7>ip6_frag_reasm: payload len = %d <7>ip6_frag_reasm: no memory for reassembly ip6frag_high_thresh ip6frag_low_thresh ip6frag_time ip6frag_secret_interval <7>connect: ipv4 mapped <6>TCPv6: Possible SYN flooding on port %d. Dropping request. net/ipv6/tcp_ipv6.c sl local_address remote_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode %4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %lu %lu %u %u %d %4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X %02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %p tcp6 <7>ipv6_hop_ra: wrong RA length %d <7>ipv6_hop_jumbo: wrong jumbo opt length/alignment %d <7>invalid cmsg type: %d ip6_flowlabel %-5s %-1s %-6s %-6s %-6s %-8s %-32s %s Label Owner Users Expires %05X %-1d %-6d %-6d %-6ld %-8ld %04x%04x%04x%04x%04x%04x%04x%04x %-4d net/ipv6/inet6_connection_sock.c icmp bindv6only mld_max_msf net/ipv6/xfrm6_policy.c <7>ip6_route_me_harder: No more route. sockstat6 dev_snmp6 Icmp6%s%s %-32s %lu Icmp6%sType%u %-32s %u ifIndex TCP6: inuse %d UDP6: inuse %d UDPLITE6: inuse %d RAW6: inuse %d FRAG6: inuse %d memory %d Ip6InReceives Ip6InHdrErrors Ip6InTooBigErrors Ip6InNoRoutes Ip6InAddrErrors Ip6InUnknownProtos Ip6InTruncatedPkts Ip6InDiscards Ip6InDelivers Ip6OutForwDatagrams Ip6OutRequests Ip6OutDiscards Ip6OutNoRoutes Ip6ReasmTimeout Ip6ReasmReqds Ip6ReasmOKs Ip6ReasmFails Ip6FragOKs Ip6FragFails Ip6FragCreates Ip6InMcastPkts Ip6OutMcastPkts Icmp6InMsgs Icmp6InErrors Icmp6OutMsgs Udp6InDatagrams Udp6NoPorts Udp6InErrors Udp6OutDatagrams UdpLite6InDatagrams UdpLite6NoPorts UdpLite6InErrors UdpLite6OutDatagrams PktTooBigs ParmProblems EchoReplies GroupMembQueries GroupMembResponses GroupMembReductions RouterSolicits RouterAdvertisements NeighborSolicits NeighborAdvertisements MLDv2Reports net/ipv6/inet6_hashtables.c packet sk RefCnt Type Proto Iface R Rmem User Inode %p %-6d %-4d %04x %-5d %1d %-6u %-6u %-6lu &po->pg_vec_lock <7>packet_mmap: vma is busy: %d net/packet/af_packet.c Attempt to release alive packet socket: %p <3>bridge: can't register sap for STP <4>%s: received packet with own address as source address <4>%s adding interface with same address as a received packet bridge_fdb_cache plip net/bridge/br_if.c brport <6>%s: port %d(%s) entering %s state sending tcn bpdu propagating <6>%s: topology change detected, %s <6>%s: received tcn bpdu on port %i(%s) listening learning %.2x%.2x.%.2x%.2x%.2x%.2x%.2x%.2x net/bridge/br_stp_if.c /sbin/bridge-stp <6>%s: userspace STP started <6>%s: starting userspace STP failed, starting kernel STP stop <6>%s: userspace STP stopped, return code %d <6>%s: port %i(%s) entering %s state <6>%s: neighbor %.2x%.2x.%.2x:%.2x:%.2x:%.2x:%.2x:%.2x lost on port %d(%s) net/bridge/br_netlink.c port_id port_no designated_root designated_bridge designated_port designated_cost change_ack config_pending message_age_timer forward_delay_timer hold_timer %x:%x:%x:%x:%x:%x <6>%s: can't create group %s/%s <6>%s: can't create attribute file %s/%s brif <6>%s: can't add kobject (directory) %s/%s brforward forward_delay hello_time max_age ageing_time stp_state bridge_id root_id root_path_cost root_port topology_change topology_change_detected hello_timer tcn_timer topology_change_timer gc_timer group_addr <7>Local Bridge: SKB Clone failed. Freeing original packet <4>Local Bridge: Device info not found for device index (%d), info = 0x%08x Error running selective packet handler (%d) Error: Device %s does not exist Error: Bridge port %s does not exist Error: Bridge %s does not exist Error: Bridge %s has no selective packet handler installed Error: Failed to allocate memory for packet handler Error: Packet handler with priority %d already exists DEBUG: Register selective packet handler successful <4>Performing cross-bridge DNAT requires IP forwarding to be enabled <4>br_netfilter: can't register to sysctl. <5>Bridge firewalling registered bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged bridge-nf-filter-pppoe-tagged Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | %d %6s: %04x %3d%c %3d%c %3d%c %6d %6d %6d %6d %6d %6d <3>%s (WE) : Invalid/Unknown Wireless Event (0x%04X) <3>%s (WE) : Wireless Event too big (%d) <3>%s (WE) : Wireless Event too small (%d) net/wireless/wext.c net/sysctl_net.c Error: Failed to initialize the PPM PPM deinitialize failed FATAL HIL Core Error: Received event from unknown chain 0x%p HIL Core: Unable to unload profile %s HIL Core: Profile %s has been unloaded. Error: DOCSIS Packet Processor start session notification callback already exist Error: DOCSIS Packet Processor start session notification callback empty Error: DOCSIS Packet Processor delete session notification callback already exist Error: DOCSIS Packet Processor delete session notification callback empty Error: No active profile exists to be unloaded HIL Core Error: Unable to unload profile %s HIL Core succesfully deinitialized HIL Core: Unable to allocate memory for the HIL Profile %s HIL Core: Unable to load profile %s HIL Core: HIL Profile %s failed to initialize. HIL Core: Profile %s has been Loaded. VLAN ID = %hu PPPoE SID = 0x%hx Dst. MAC = %02x:%02x:%02x:%02x:%02x:%02x Dst. MAC = XXX Src. MAC = %02x:%02x:%02x:%02x:%02x:%02x Src. MAC = XXX Dst IP = 0x%08x [ %d.%d.%d.%d ] Dst IP = XXX Src IP = 0x%08x [ %d.%d.%d.%d ] Src IP = XXX Protocol = 0x%x Protocol = XXX TOS = 0x%x TOS = XXX Dst Port = %d Dst Port = XXX Src Port = %d Src Port = XXX <3>Error: Event Handler register failed ti_pp ti_pp_dev <3>Error: Unable to create Packet Processor proc entry. <0>------- FATAL Error: Packet Processor PDSP is not healthy ------- net/ti/pp/hil_intrusive.c <7>%s: Start Enable PP PSM <6>%s: Disable new sessions - HIL disabled <6>%s: Flush all old sessions Error: Unable to flush all sessions <7>%s: Start Disable PP PSM %s: Error: Unable to disable PP PSM <6>%s: Enable new sessions - HIL enabled %x:%x:%x:%x:%x:%x:%x:%x Dst IP = %s Src IP = %s <3>ERROR: Incorrect Number of parameters passed. Version retrieve failed ... Packet Processor Firmware Version : %d.%d.%d.%d ==== TDOX DB ==== Free [%08X], num [%d] Act [%08X], num [%d] ==== TDOX RECORDS ==== +-----+------+------------+------------+------+---------------+ | idx | sess | addr | next | PP | Estimated RTT | | %3d | %4d | 0x%08X | 0x%08X | %4d | %10d ms | global Packets received in the PP : %u Number of search attemps : %u Number of matched searches : %u Number of Synch Delays : %u Packet forwarded by the PP : %u IPv4 Packets Forwarded : %u Descriptors Starved : %u Buffers Starved : %u vpid ----------------------------------------- HIL State is : %s ---------------- VPID %d (PID %d) ---------------- Rx Unicast Packets: %u Rx Broadcast Packets: %u Rx Multicast Packets: %u Rx Bytes : 0x%08X%08X Rx Bytes - Low (dec): %u Rx Discard : %u Tx Unicast Packets: %u Tx Broadcast Packets: %u Tx Multicast Packets: %u Tx Bytes : 0x%08X%08X Tx Bytes - Low (dec): %u Tx Errors : %u Tx Discards : %u PID %d DBG State is : %s TDOX State is : %s QoS State is : %s TDOX Threshold : %d ms Bypassed pkts : %u Other pkts : %u Ingress pkts : %u Egress pkts : %u Null pkts : %u Total Sessions: %d Total Errors : %d Bucket/No.Sessions %d / %d QoS queues statistics: queue | forwarded | discarded -------+------------+------------ %5d | %10d | %10d session Detected %d sessions in packet processor ---------------- Session %d ---------------- Bridged Routed Property : %s Timeout : %d Priority : %d **** Ingress Properties **** Ingress VPID = %d No L2 Properties IP Version = IPv4 IP Version = IPv6 No L3/L4 Properties **** Egress Properties %d **** Egress VPID = %d brief VPID index=%02d, handle=%02d: Rx=%10d, Tx=%10d SESSION index=%02d, handle=%02d: Fwd=%10d ERROR: Incorrect too many parameters dropping the command show deinit Error: Packet Processor Deinitialization Failed udptimeout reset nodbg notdox noqos nopsm <3>FATAL Error: Event 0x%x violates the specification <3>Error: Unable to delete session %d <3>PP Generated Event 0x%x which is UNHANDLED <3>FATAL Error: PPM is OUT of memory <3>FATAL Error: PPM Internal Error <3>PP: create session failed (%lu messages suppressed) <3>PP: create session failed <3>FATAL Error: PP Operation 0x%x Failed <3>PP: create session ok, after %lu fail messages suppressed <6>PPD Event 0x%x Param1: 0x%x Param2: 0x%x /dev/%s: vpid=%d pid=%d Rx Bytes - low : %u Tx Bytes - low : %u Tx Discards : %u <3>Error: Unable to create Null VPID %d PID %d Device %s <3>Error: Unable to delete VPID %d PID %d Device %s <3>Error: Unable to create VPID %d PID %d Device %s FATAL Error: VIF Index %d does not map to a device No downstream interface for group 0x%x <3>Error: MFC to session conversion failed <3>FATAL Error: Multicast session creation failed <6>Multicast Session %d created succesfully Session Handle %d already mapped to group: 0x%x <3>Intrusive -> Does not handle event 0x%lx Multicast group 0x%x not mapped <6>Device %s is going UP! <6>Succesfully created VPID %d PID %d Device %s <6>Ingress Hook on PID/VPID: %d/%d Name: %s <6>Egress Hook on PID/VPID: %d/%d Name: %s <6>Device %s with VPID: %d is going DOWN! <6>Succesfully deleted VPID %d PID %d Device %s <6>InetDevice %s is going UP! <6>InetDevice %s with VPID: %d is going DOWN! intrusive lib/klist.c `armv6 core_marker_format name %s format %s core_marker_format name %s format %s 2