If you like BoxMatrix then please contribute Supportdata, Supportdata2, Firmware and/or Hardware (get in touch).
My metamonk@yahoo.com is not reachable by me since years. Please use hippie2000@webnmail.de instead.
Box-Modes
From BoxMatrix
Box-Modes[edit]
 |
This is currently being created and is unfinished, come back frequently to see it evolve! This message will be removed once it's finished. |
This is going to be an overview of settings in the box UI-Module depending on the configured mode.
All variables named below were acquired by ctlmgr_ctl r box settings/<variable> [/activated].
Unfotunately the box module does not support ctlmgr_ctl u box to list it completely.
IP-Client[edit]
IP-Client (LAN) or Mesh-Repeater (LAN) mode:
- dsldmode: dsldmode_bridge
- opmode: opmode_eth_ipclient
- ata_mode: 1
- lanbridge: 1
- fullbridge: 0
- dslbridge_if_routing: 0
WLAN-Repeater[edit]
WLAN-Repeater (WDS2) or Mesh-Repeater (WLAN) mode:
- dsldmode: dsldmode_bridge
- opmode: opmode_eth_ipclient
- ata_mode: 1
- lanbridge: 1
- fullbridge: 0
- dslbridge_if_routing: 0
Modes[edit]
dsldmode[edit]
This enumeration is defined in libar7cfg.so:
dsldmode_bridge # IP-Client, WLAN-Repeater, Mesh-Repeater, ....... dsldmode_router # DSL-Router without PPPoE-Passthrough dsldmode_both # DSL-Router with PPPoE-Passthrough - used by Alice IAD and Telekom OEM models, or by manual activation. dsldmode_full_bridge
opmode[edit]
This enumeration is defined in libcmapi.so:
opmode_other opmode_standard opmode_modem opmode_pppoe opmode_pppoa opmode_pppoa_llc opmode_ether opmode_ipnlpid opmode_ipsnap opmode_ipraw opmode_eth_pppoe opmode_eth_ip opmode_eth_ipclient # IP-Client, WLAN-Repeater, Mesh-Repeater opmode_usb_modem # USB UMTS-Modem of LTE-Modem opmode_wlan_ip # IP-Router via WLAN ??? opmode_usb_tethering # USB-Tethering using a smart phone opmode_multiwan_lte # 6890 Multi-WAN routing
Research[edit]
The following script hase been used;
echo -n "* dsldmode: " ctlmgr_ctl r box settings/dsldmode echo -n "* opmode: " ctlmgr_ctl r box settings/opmode echo -n "* ata_mode: " ctlmgr_ctl r box settings/ata_mode echo -n "* lanbridge: " ctlmgr_ctl r box settings/lanbridge/activated echo -n "* fullbridge: " ctlmgr_ctl r box settings/fullbridge/activated echo -n "* dslbridge_if_routing: " ctlmgr_ctl r box settings/dslbridge_if_routing/activated
