Property:BBPD EVENT DSL RESET MINMAX SNRBIT
|BoxMatrix >> System >> BBPD_EVENT_DSL_RESET_MINMAX_SNRBIT
|BBPD_EVENT_DSL_RESET_MINMAX_SNRBIT - type Event
|System >> AVMIPC-Datastore - Origin: AVM
|Firmware: 7.39 - 7.51 - Senders: bbpd
|Trigger event requesting reset of the SNR min / max recording.
BBPD_EVENT_DSL_RESET_MINMAX_SNRBIT is a trigger event requesting reset of the SNR min / max recording.
SNR (Signal to Noise Ratio) is what is measured during the DSL modem training. It is the base of how many bits are
allocated per carrier in the DSL spectrum. The SNR is measured constantly, and for diagnosis the minimum and maximum
per carrier is recorded. This event will reset this recording. A similar mechanism may also be used for the DOCSIS spectrum.
fiber_monitor does not appear in the Dependencies below since it is running on the Falcon CPU of a 5590.
Supportdata2 can not record listeners on this CPU yet. This gap will be filled once 5530 probes arrive.
Although this event sounds DSL specific the listeners show it is not. This does not mean that all listeners act on this event.
AVM step by step merges all access technologies to the generic term Broadband.
Sample output of a 7530 fw 7.39 calling
aicmd avmipcd datastore query BBPD_EVENT_DSL_RESET_MINMAX_SNRBIT full.
If the sample contains a
size info then it's a snippet of
aicmd avmipcd datastore show full from Supportdata2.
@BBPD_EVENT_DSL_RESET_MINMAX_SNRBIT : size 0, set by remote, local:dsl_monitor
Daily updated index of all dependencies of this event. Last update: 2024-02-28 05:17 GMT.
** in the
Mod column marks info from Supportdata2 probes, which will always stay incomplete.
- in the
Mod column marks manual research, the
Firmware then shows where the
Object occurs, not the
|7.39 - 7.51
|avmipc endpoint of dsl_monitor
|7.21 - 7.80
|Broadband frontend state gathering daemon.
|2 dependencies for this event
Daily updated index of the presence, path and size of this event for each model. Last update: 2024-02-28 05:17 GMT.
Showing all models using this event. Click any column header (click-wait-click) to sort the list by the respective data.
(main/scrpn/boot/arm/prx/atom) label in the
Model column shows which CPU is meant for models with multiple Linux instances.
Note that this list comes from Supportdata2 probes, which can have arbitrary settings and come from different firmware versions.
It doesn't say much if a model is not listed here. It may be a missing supportdata2 file or just a disabled feature.
|7.39 - 7.51
|FRITZ!Box 7530 AX
|7.39 - 7.51
|FRITZ!Box 7590 AX
|5 models use this event
The data in this article is incomplete since it was manually collected using the Supportdata2 project.
Unlike the Supportdata-Probes which have been collected for years Supportdata2 is brand new and only has a few probes.
If you have access to a shell then please help to extend the Supportdata2 collection to improve this data.
Showing 1 related property.