If you like BoxMatrix then please contribute Supportdata, Supportdata2, Firmware and/or Hardware (get in touch).
My metamonk@yahoo.com is not reachable by me since years. Please use hippie2000@webnmail.de instead.
TIATM-Environment
| BoxMatrix >> Environment >> TIATM-Environment | @ BoxMatrix - IRC-Chat - Translate: de es fr it nl pl |
| News | Selectors | Models | Accessories | Components | Environment | Config | Commands | System | Webif | Software | Develop | Lexicon | Community | Project | Media |
| Bootloader-Env | Brandings | TIATM-Env | Linux-Env | AVM-Env | Config-Env | CGI-Env | WebCM-Env | Kernel-Cfg | Research |
 |
The TI-ATM environment is a set of optional Bootloader-Environment variables used to tweak internal settings of the proprietary Texas Instruments DSL driver Kernel-Modules tiatm.ko (AR7) and its sucessor dsl_ur8.ko (UR8). Note that FRITZ!OS does neither notice nor verify these variables. They are intended for low-level development purposes only and should not be used in production scenario.
|
TIATM-Environment[edit]
Daily updated index of all TI-ATM environment variables found scanning Firmware-Probes . Last update: 2024-11-21 05:20 GMT.
The label (tiatm) in the Variable column shows there are other objects in this wiki using this name.
The Mod column shows the amount of models using the respective variable. Click the column header to sort by this number.
| Variable | Mod | Firmware | Description | Type | Origin |
|---|---|---|---|---|---|
| ARTT_MEM | 11 | 4.44 - 6.06 | AVM DSL firmware and diagnostic buffer (UR8). | TEXT | AVM |
| ATM_ETSI | 11 | 4.44 - 6.06 | ETSI address sting (UR8). | TEXT | TI |
| autopvc_enable | 11 | 4.44 - 6.06 | Enable or disable automatic PVC detection (UR8). | TEXT | TI |
| bitswap | 11 | 4.44 - 6.06 | Enable or disable Bitswapping (UR8). | TEXT | TI |
| CppiErrProc | 11 | 4.44 - 6.06 | Handler process for CPPI errors (UR8). | TEXT | TI |
| datapump_path | 11 | 4.44 - 6.06 | Path to an alternative DSL datapump firmware (UR8). | TEXT | AVM |
| dgas_polarity | 11 | 4.44 - 6.06 | TODO (UR8). | TEXT | TI |
| DSL_BIT_TMODE | 11 | 4.44 - 6.06 | Activates DSL bit trained mode. | TEXT | TI |
| DSL_FEATURE_CNTL_0 | 11 | 4.44 - 6.06 | Provider specific interoperability tweak bits #1 (UR8). | TEXT | TI |
| DSL_FEATURE_CNTL_1 | 11 | 4.44 - 6.06 | Provider specific interoperability tweak bits #2 (UR8). | TEXT | TI |
| DSL_PHY_CNTL_0 | 11 | 4.44 - 6.06 | Generic DSL tweak bits #1 (UR8). | TEXT | TI |
| DSL_PHY_CNTL_1 | 11 | 4.44 - 6.06 | Generic DSL tweak bits #2 (UR8). | TEXT | TI |
| DSL_UPG_DONE | 11 | 4.44 - 6.06 | Notify about new datapump firmware - unused (UR8). | TEXT | TI |
| dsp_freq | 11 | 4.44 - 6.06 | DSP boost frequency (200-250MHz) (AR7 / UR8). | TEXT | TI |
| dsp_noboost | 11 | 4.44 - 6.06 | Surpress DSP frequency boost (UR8). | TEXT | TI |
| enable_margin_retrain | 11 | 4.44 - 6.06 | Enables automatic Resync on low signal noice ratio (SNR, UR8). | TEXT | TI |
| enable_rate_adapt | 11 | 4.44 - 6.06 | Enables seamless rate adaption (SRA, UR8). | TEXT | TI |
| eoc_vendor_id | 11 | 4.44 - 6.06 | EOC vendor id - 8 ASCII bytes, hex encoded (UR8). | TEXT | TI |
| eoc_vendor_revision | 11 | 4.44 - 6.06 | EOC vendor revision for ADSL1 - 32 bit integer (UR8). | TEXT | TI |
| eoc_vendor_serialnum | 11 | 4.44 - 6.06 | EOC vendor serial number - 32 ASCII bytes, hex encoded (UR8). | TEXT | TI |
| fine_gain_control | 11 | 4.44 - 6.06 | Enables manual finetuning of the automatic gain controller (AGC, UR8). | TEXT | TI |
| fine_gain_value | 11 | 4.44 - 6.06 | The current setting of the manual finetuning of the AGC (UR8). | TEXT | TI |
| invntry_vernum | 11 | 4.44 - 6.06 | EOC vendor revision for ADSL2/ADSL2+ - 16 digits integer (UR8). | TEXT | TI |
| los_alarm | 11 | 4.44 - 6.06 | Enables loss of signal (LOS) alarm (UR8). | TEXT | TI |
| macc (tiatm) | 25 | 3.42 - 4.27 | Alternative MAC-Address of the DSL interface (AR7). | TEXT | TI |
| margin_threshold | 11 | 4.44 - 6.06 | Threshold for enable_margin_retrain in 0.5 dB steps (UR8). | TEXT | TI |
| maximum_bits_per_carrier | 11 | 4.44 - 6.06 | Maximum bits per upstream Subcarrier (UR8). | TEXT | TI |
| maximum_interleave_depth | 11 | 4.44 - 6.06 | Maximum depth pf the Interleaving (UR8). | TEXT | TI |
| modulation | 22 | 1.63 - 6.06 | DSL modem training mode (UR8). | TEXT | TI |
| oam_lb_timeout | 39 | 1.63 - 6.06 | OAM loopback timeout in milliseconds (AR7 / UR8). | TEXT | TI |
| pair_selection | 11 | 4.44 - 6.06 | TODO (UR8). | TEXT | TI |
| SarLB | 11 | 4.44 - 6.06 | Activates SAR loopback mode (UR8). | TEXT | TI |
| SarRxBuf | 31 | 3.42 - 6.06 | Number of SAR receive buffers each channel (AR7 / UR8). | TEXT | TI |
| SarRxMax | 31 | 3.42 - 6.06 | Maximum number of receive buffers to work through each interrupt (AR7 / UR8). | TEXT | TI |
| SarTxBuf | 31 | 3.42 - 6.06 | Number of SAR transmit buffers each channel (AR7 / UR8). | TEXT | TI |
| SarTxMax | 31 | 3.42 - 6.06 | Maximum number of transmit buffers to work through each interrupt (AR7 / UR8). | TEXT | TI |
| SarTxRsv | 11 | 4.44 - 6.06 | TODO (UR8). | TEXT | TI |
| sar_ipacemax | 36 | 3.42 - 6.06 | SAR interrupt pacing value (AR7 / UR8). | TEXT | TI |
| trellis | 11 | 4.44 - 6.06 | Enable or disable Trellis-Coding (UR8). | TEXT | TI |
| TurboDSL | 36 | 3.42 - 6.06 | Activated Turbo-DSL (AR7 / UR8). | TEXT | TI |
| WdtEnable | 11 | 4.44 - 6.06 | Enable or disable the DSP Watchdog (UR8). | TEXT | AVM |
| 41 variables | |||||
