If you like BoxMatrix then please contribute Supportdata, Supportdata2, Firmware and/or Hardware (get in touch).
My metamonk@yahoo.com is not reachable by me since years. Please use hippie2000@webnmail.de instead.
Kernel-Config-M
From BoxMatrix
| BoxMatrix >> Environment >> Kernel-Config-M | @ BoxMatrix - IRC-Chat - Translate: de es fr it nl pl |
| News | Selectors | Models | Accessories | Components | Environment | Config | Commands | System | Webif | Software | Develop | Lexicon | Community | Project | Media |
| Bootloader-Env | Brandings | TIATM-Env | Linux-Env | AVM-Env | Config-Env | CGI-Env | WebCM-Env | Kernel-Cfg | Research |
 |
Similar to the Config-Environment which stores compile options to build FRITZ!OS the Kernel-Config stores compile options to build the respective Kernel. Unlike the Config-Environment which is accessible as shell variables there is no direct way to access the Kernel-Config. However, there's a nice mechanism called IKCONFIG (Included Kernel-Config, CONFIG_IKCONFIG)[1] which permits to embed the compressed Kernel-Config in the kernel binary. IKCONFIG can be located in the decompressed kernel binary by its signatures and can be accessed from the running kernel at /proc/config.gz, if CONFIG_IKCONFIG_PROC is enabled. Unfortunately AVM only uses this feature for nearly 40 models. Thanks! Enough to create this section, but not representing all current Box-Models.
|
Kernel-Config[edit]
Kernel-Config variables starting with 'CONFIG_M'
Goto: 0-9 - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - ALL
Dear AVM: Please activate CONFIG_IKCONFIG for all kernels and modules.builtin (ascii) in rootfs to help developers. Thanks!
Daily updated index of all kernel config variables found scanning Firmware-Probes . Last update: 2025-01-19 05:06 GMT.
The label (kerncfg) in the Variable column shows there are other objects in this wiki using this name.
The Mod column shows the amount of models using the respective variable. Click the column header to sort by this number.
| Variable | Mod | Firmware | Value | Description | Kernel | Origin |
|---|---|---|---|---|---|---|
| CONFIG_M25PXX_USE_FAST_READ | 2 | 5.25 - 7.29 | y | Use FAST_READ OPCode allowing SPI CLK >= 50MHz | 2.6.28.8 - 2.6.39.4 | Linux |
| CONFIG_MAC80211 | 3 | 7.19 - 7.57 | m, y | Generic IEEE 802.11 Networking Stack (mac80211) (mac80211.ko) | 4.9.161 - 4.9.279 | Linux |
| CONFIG_MAC80211_HAS_RC | 3 | 7.19 - 7.57 | y | IEEE 802.11 Rate Control algorithm is set | 4.9.161 - 4.9.279 | Linux |
| CONFIG_MAC80211_RC_DEFAULT | 3 | 7.19 - 7.57 | 'minstrel_ht' | IEEE 802.11 default Rate Control algorithm (minstrel_ht) | 4.9.161 - 4.9.279 | Linux |
| CONFIG_MAC80211_RC_DEFAULT_MINSTREL | 3 | 7.19 - 7.57 | y | Minstrel | 4.9.161 - 4.9.279 | Linux |
| CONFIG_MAC80211_RC_MINSTREL | 3 | 7.19 - 7.57 | y | Enable IEEE 802.11 Minstrel TX Rate Control algorithm (minstrel) (mac80211.ko) | 4.9.161 - 4.9.279 | Linux |
| CONFIG_MAC80211_RC_MINSTREL_HT | 3 | 7.19 - 7.57 | y | Enable IEEE 802.11n Minstrel HT TX Rate Control algorithm (minstrel_ht) (mac80211.ko) | 4.9.161 - 4.9.279 | Linux |
| CONFIG_MAC80211_RC_MINSTREL_VHT | 1 | 7.19 | y | Enable IEEE 802.11ac Minstrel VHT TX Rate Control algorithm (minstrel_ht) | 4.9.161 | Linux |
| CONFIG_MAC80211_STA_HASH_MAX_SIZE | 33 | 7.01 - 8.00 | 0 | Station hash table maximum size | 4.4.60 - 5.15.153 | Linux |
| CONFIG_MACH_AR724x | 1 | 6.30 | y | Support for Atheros ar724x based board (724x.ko, core.ko, fixup-ath.ko, ops-ath.ko, pci-ar7240.ko, pci-ath.ko) | 2.6.32.61 | Linux |
| CONFIG_MACH_ATHEROS | 2 | 6.30 - 6.83 | y | Support for Atheros based board | 2.6.32.61 | Linux |
| CONFIG_MACH_BCM963138 | 2 | 6.54 - 7.18 | y | Support for BCM963138 board (arch_profile_brcma.ko, avm.ko, avm_dma_device.ko, board_963xx.ko, brcm_wdt.ko) | 3.4.11 - 4.1.38 | Linux |
| CONFIG_MACH_DAVINCI_EVM | 1 | 4.99 | y | TI DM644x EVM (board-dm644x-evm.ko, board-evm.ko, i2c-emac.ko, leds-evm.ko) | 2.6.19.2 | Linux |
| CONFIG_MACH_DAVINCI_VLYNQ_TI | 1 | 4.99 | y | TI VLYNQ for Davinci VF | 2.6.19.2 | Linux |
| CONFIG_MACH_FUSIV | 1 | 6.86 | y | Fusiv processor based boards (pci-fusiv.ko) | 2.6.28.8 | Linux |
| CONFIG_MACH_FUSIV_MIPS32 | 1 | 6.86 | y | Fusiv MIPS32 Core (core.ko, ikan6850.ko) | 2.6.28.8 | Linux |
| CONFIG_MACH_IKAN_MIPS | 1 | 4.76 | y | Ikanos MIPS core | 2.6.19.2 | Linux |
| CONFIG_MACH_NO_WESTBRIDGE | 2 | 7.29 | y | no West Bridge HAL selected | 2.6.39.4 | Linux |
| CONFIG_MACH_NXEB500HMI | Enable Hilscher nxeb500hmi Eval Board support | Linux | ||||
| CONFIG_MACH_PUMA5EVM | 1 | 5.25 | y | Puma5 EVM Board (pal_sysPsc.ko, pal_sysPscPowerCtrl.ko, pal_sysPscResetCtrl.ko, pal_sysWdtimer.ko) | 2.6.28.8 | Linux |
| CONFIG_MACH_PUMA6 | 1 | 7.29 | y | Puma6 SOC (ar7wdt_hw_puma.ko, arch_profile_pumaX.ko, avm.ko, checkpoint_proc.ko, profiling.ko) | 2.6.39.4 | Linux |
| CONFIG_MACH_PUMA6_BOARD | 1 | 7.29 | y | Puma6 Board | 2.6.39.4 | Linux |
| CONFIG_MACH_PUMA7 | 7 | 7.04 - 8.00 | y | Puma7 SOC (arch_profile_pumaX.ko, avm.ko, profiling.ko) | 3.12.14 - 5.15.153 | Linux |
| CONFIG_MACH_PUMA7_BOARD | 7 | 7.04 - 8.00 | y | Puma7 Board | 3.12.14 - 5.15.153 | Linux |
| CONFIG_MACH_QCA955x | Support for Atheros QCA955x based board (955x.ko, core.ko, fixup-ath.ko, ops-ath.ko, otp.ko, pci-ath.ko) | Linux | ||||
| CONFIG_MACH_QCA956x | 1 | 6.50 - 6.83 | y | Support for Atheros QCA956x based board (956x.ko, avmnet_ar8326_wan.ko, core.ko, fixup-ath.ko, ops-ath.ko, pci-ath.ko) | 2.6.32.61 | Linux |
| CONFIG_MACH_RLX | 1 | 7.62 | y | [Select CPU features] | 3.18.24 | Linux |
| CONFIG_MACSEC | 2 | 7.21 - 8.00 | y | IEEE 802.1AE MAC-level encryption (MACsec) (macsec.ko) | 4.9.218 - 4.9.276 | Linux |
| CONFIG_MACSEC_HW_OFFLOAD | 2 | 7.21 - 8.00 | y | Intel MACSec HW Support | 4.9.218 - 4.9.276 | Linux |
| CONFIG_MACVLAN | 21 | 6.51 - 8.00 | m, y | MAC-VLAN support (macvlan.ko) | 3.10.12 - 5.15.153 | Linux |
| CONFIG_MAGIC_SYSRQ | 78 | 3.23 - 8.00 | y | Magic SysRq key (poweroff.ko, sysrq.ko) | 2.4.17 - 5.15.153 | Linux |
| CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE | 41 | 6.52 - 8.00 | 0x1 | Enable magic SysRq key functions by default | 3.14.43 - 5.15.153 | Linux |
| CONFIG_MAGIC_SYSRQ_SERIAL | 13 | 7.19 - 8.00 | y | Enable magic SysRq key over serial | 4.9.198 - 4.19.183 | Linux |
| CONFIG_MAILBOX | 6 | 7.19 - 7.90 | y | Mailbox Hardware Support (mailbox.ko) | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MANDATORY_FILE_LOCKING | 22 | 7.14 - 8.00 | y | Enable Mandatory file locking | 4.9.161 - 4.19.183 | Linux |
| CONFIG_MAP_E_SUPPORT | 1 | 7.30 | y | IPv6: MAP (RFC 7597) support | 4.4.60 | Linux |
| CONFIG_MARKERS | 2 | 5.06 - 5.25 | y | Activate markers (marker.ko) | 2.6.28.8 | Linux |
| CONFIG_MARVELL_PHY | 1 | 7.29 | y | Marvell PHYs (marvell.ko) | 2.6.39.4 | Linux |
| CONFIG_MARVEL_88E6161 | 1 | 6.86 | y | Marvel 88E6161 | 2.6.28.8 | Linux |
| CONFIG_MARVEL_SWITCH | 1 | 6.86 | m | Marvel 88E6161 Ethernet switch | 2.6.28.8 | Linux |
| CONFIG_MATOM | 5 | 7.04 - 8.00 | y | Intel Atom | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MAX_POSIX_TIMERS | 14 | 3.23 - 4.01 | 3000 | System wide maximum number of POSIX timers | 2.4.17 | Linux |
| CONFIG_MAX_ZONEDMA_SIZE | 12 | 6.51 - 8.00 | 128, 256 | Maximum ZONE_DMA Size in (MB) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MAY_USE_DEVLINK | 22 | 7.14 - 8.00 | y | Prevent link errors wuth external modules using devlink infrastructure | 4.9.161 - 4.19.183 | Linux |
| CONFIG_MCAST_HELPER | 4 | 7.61 - 8.00 | m | Multicast Helper support (mcast_helper.ko) | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MCAST_HELPER_PACKAGE | 4 | 7.61 - 8.00 | y | Multicast Helper package enable | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MCAST_HELPER_REG | 4 | 7.61 - 8.00 | y | Multicast Helper Register Support (mcast_helper_reg.ko) | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MCAST_LATENCY_OPTIMIZATION | 3 | 7.50 | y | Lantiq Multicast Latency Optimization | 4.9.218 - 4.9.276 | Linux |
| CONFIG_MCAST_SNOOPING | 12 | 7.19 - 8.00 | y | MCAST Snooping support (bridge.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MD | 2 | 7.61 - 7.90 | y | Multiple devices driver support (RAID and LVM) | 5.4.213 | Linux |
| CONFIG_MDIO | 16 | 6.52 - 7.90 | y | Generic support for MDIO-compatible transceivers (mdio.ko) | 2.6.39.4 - 5.4.213 | Linux |
| CONFIG_MDIO_BITBANG | 14 | 6.52 - 8.00 | m, y | Bitbanged MDIO buses (mdio-bitbang.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MDIO_BOARDINFO | 21 | 6.51 - 7.81 | y | Collect pre-declarations of PHY devices (mdio-boardinfo.ko) | 3.10.12 - 4.4.271 | Linux |
| CONFIG_MDIO_BUS | 6 | 7.61 - 8.00 | y | Build mdio_bus/mdio_device code is as a loadable module or built-in | 5.4.213 - 5.15.153 | Linux |
| CONFIG_MDIO_DEVICE | 6 | 7.61 - 8.00 | y | MDIO bus device drivers (mdio-bus.ko) | 5.4.213 - 5.15.153 | Linux |
| CONFIG_MDIO_DEVRES | 4 | 7.61 - 8.00 | y | MDIO bus allocation and registation (mdio_devres.ko) | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MDIO_GPIO | 10 | 6.52 - 7.90 | y | GPIO lib-based bitbanged MDIO buses (mdio-gpio.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MDIO_IPQ40XX | 2 | 6.52 - 6.92 | y | Qualcomm Atheros ipq40xx MDIO interface (mdio-ipq40xx.ko) | 3.14.43 | Linux |
| CONFIG_MDIO_QCA | 7 | 7.19 - 7.90 | y | Qualcomm Atheros ipq MDIO interface (mdio-qca.ko) | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MD_RAID0 | 2 | 7.61 - 7.90 | m | RAID-0 (striping) mode (raid0.ko) | 5.4.213 | Linux |
| CONFIG_MD_RAID1 | 2 | 7.61 - 7.90 | m | RAID-1 (mirroring) mode (raid1.ko) | 5.4.213 | Linux |
| CONFIG_MD_RAID10 | 2 | 7.61 - 7.90 | m | RAID-10 (mirrored striping) mode (raid10.ko) | 5.4.213 | Linux |
| CONFIG_MEDIA_ATTACH | 1 | 7.27 | y | Load and attach frontend and tuner driver modules as needed | 4.4.60 | Linux |
| CONFIG_MEDIA_CAMERA_SUPPORT | 10 | 6.52 - 7.81 | y | Cameras/video grabbers support | 3.14.43 - 4.4.271 | Linux |
| CONFIG_MEDIA_DIGITAL_TV_SUPPORT | 1 | 7.27 | y | Digital TV support | 4.4.60 | Linux |
| CONFIG_MEDIA_SUBDRV_AUTOSELECT | 9 | 6.52 - 7.81 | y | Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends) | 3.14.43 - 4.4.271 | Linux |
| CONFIG_MEDIA_SUPPORT | 11 | 6.52 - 7.81 | m, y | Multimedia support (cec-edid.ko, cec.ko, media.ko) | 3.4.11 - 4.4.271 | Linux |
| CONFIG_MEDIA_TUNER | 3 | 6.54 - 7.27 | m | Generic support for analog and hybrid tuners | 3.4.11 - 4.4.60 | Linux |
| CONFIG_MEDIA_TUNER_CUSTOMISE | 2 | 6.54 - 6.85 | y | Customize analog and hybrid tuner modules to build | 3.4.11 | Linux |
| CONFIG_MEDIA_USB_SUPPORT | 9 | 6.52 - 7.81 | y | Media USB Adapters | 3.14.43 - 4.4.271 | Linux |
| CONFIG_MEI | 1 | 5.06 | y | [MEI driver] | 2.6.28.8 | Linux |
| CONFIG_MEMBARRIER | 36 | 7.01 - 8.00 | y | Enable membarrier() system call (membarrier.ko) | 4.4.60 - 5.15.153 | Linux |
| CONFIG_MEMCG | 19 | 6.51 - 8.00 | y | Memory controller (memcontrol.ko, page_cgroup.ko, vmpressure.ko) | 3.10.12 - 5.15.153 | Linux |
| CONFIG_MEMCG_KMEM | 14 | 6.51 - 8.00 | y | Memory Resource Controller Kernel Memory accounting (tcp_memcontrol.ko) | 3.10.12 - 5.15.153 | Linux |
| CONFIG_MEMCG_SWAP | 8 | 7.39 - 8.00 | y | Swap controller (swap_cgroup.ko) | 4.9.218 - 4.9.325 | Linux |
| CONFIG_MEMCG_SWAP_ENABLED | 8 | 7.39 - 8.00 | y | Swap controller enabled by default | 4.9.218 - 4.9.325 | Linux |
| CONFIG_MEMFD_CREATE | 7 | 7.39 - 8.00 | y | Allow applications to set executable bit at creation time (memfd.ko) | 4.19.183 - 5.15.153 | Linux |
| CONFIG_MEMORY | 2 | 7.39 - 8.00 | y | Memory Controller drivers | 4.9.276 | Linux |
| CONFIG_MEMORY_ISOLATION | 20 | 7.04 - 8.00 | y | Memory page isolation (page_isolation.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MEMORY_START | 14 | 3.23 - 4.01 | 14000000 | Physical memory start address | 2.4.17 | Linux |
| CONFIG_MESSAGE_LOGLEVEL_DEFAULT | 39 | 6.98 - 8.00 | 4 | Default message log level (1-7) | 3.18.24 - 5.15.153 | Linux |
| CONFIG_MFD_CORE | 4 | 7.04 - 8.00 | y | Multifunction device drivers support (mfd-core.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MFD_QCOM_RPM | 8 | 6.52 - 7.81 | y | Qualcomm Resource Power Manager (RPM) (qcom_rpm.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MFD_SPMI_PMIC | 5 | 7.19 - 7.81 | y | Qualcomm SPMI PMICs (qcom-spmi-pmic.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MFD_SUPPORT | 1 | 7.29 | y | Multifunction device drivers | 2.6.39.4 | Linux |
| CONFIG_MFD_SYSCON | 31 | 6.52 - 8.00 | y | System Controller Register R/W Based on Regmap (syscon.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MHI_BUS | 7 | 7.28 - 8.00 | y | Modem Host Interface (mhi.ko, mhi_boot.ko, mhi_dtr.ko, mhi_init.ko, mhi_main.ko, mhi_pm.ko) | 4.4.60 - 5.15.153 | Linux |
| CONFIG_MHI_BUS_TEST | 2 | 7.61 - 7.90 | m | MHI bus Test driver | 5.4.213 | Linux |
| CONFIG_MHI_DEBUG | 1 | 7.28 - 7.57 | y | MHI debug support | 4.9.250 - 4.9.279 | Linux |
| CONFIG_MHI_NETDEV | 3 | 7.28 - 7.90 | y | MHI NETDEV (mhi_netdev.ko, netdev.ko) | 4.9.250 - 5.4.213 | Linux |
| CONFIG_MHI_QTI | 1 | 7.28 - 7.57 | y | MHI QTI (mhi_arch_qti.ko, mhi_qti.ko) | 4.9.250 - 4.9.279 | Linux |
| CONFIG_MHI_UCI | 3 | 7.28 - 7.90 | y | MHI UCI (mhi_uci.ko, uci.ko) | 4.9.250 - 5.4.213 | Linux |
| CONFIG_MICROCODE | 5 | 7.04 - 7.61 | y | CPU microcode loading support (microcode.ko) | 2.6.39.4 - 5.15.111 | Linux |
| CONFIG_MICROCODE_EARLY | 1 | 7.04 - 7.13 | y | Early load microcode (core_early.ko, microcode_core_early.ko) | 3.12.59 - 3.12.74 | Linux |
| CONFIG_MICROCODE_INTEL | 5 | 7.04 - 7.61 | y | Intel microcode loading support (microcode.ko) | 2.6.39.4 - 5.15.111 | Linux |
| CONFIG_MICROCODE_INTEL_EARLY | 1 | 7.04 - 7.13 | y | Early load microcode (intel_early.ko, microcode_intel_early.ko) | 3.12.59 - 3.12.74 | Linux |
| CONFIG_MICROCODE_INTEL_LIB | 1 | 7.04 - 7.13 | y | Intel CPU Microcode Update Driver (microcode_intel_lib.ko) | 3.12.59 - 3.12.74 | Linux |
| CONFIG_MICROCODE_OLD_INTERFACE | 4 | 7.04 - 7.57 | y | Ancient loading interface (DEPRECATED) | 2.6.39.4 - 4.9.279 | Linux |
| CONFIG_MIGHT_HAVE_CACHE_L2X0 | 11 | 7.04 - 8.00 | y | Machine might have a L2x0 or PL310 cache controller | 3.12.14 - 5.4.213 | Linux |
| CONFIG_MIGHT_HAVE_PCI | 8 | 6.52 - 8.00 | y | Machine might have PCI hardware | 3.14.43 - 4.19.183 | Linux |
| CONFIG_MIGRATION | 34 | 6.51 - 8.00 | y | Page migration (migrate.ko) | 3.10.12 - 5.15.153 | Linux |
| CONFIG_MII | 47 | 5.06 - 8.00 | m, n, y | Generic Media Independent Interface device support (mii.ko) | 2.6.28.8 - 5.15.153 | Linux |
| CONFIG_MII0_PORT_ENABLED | 1 | 5.06 - 5.21 | y | Port 0 enabled | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII0_RGMII_MAC_MODE | 1 | 5.06 - 5.21 | y | RGMII MAC | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII1_PORT_ENABLED | 1 | 5.06 - 5.21 | y | Port 1 enabled | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII1_RGMII_MAC_MODE | 1 | 5.06 - 5.21 | y | RGMII MAC | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII2_GMII_MODE | 1 | 5.06 - 5.21 | y | GMII MAC | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII2_PORT_ENABLED | 1 | 5.06 - 5.21 | y | Port 2 enabled | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII3_PORT_DISABLED | 1 | 5.06 - 5.21 | y | Port 3 Disabled | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII4_GMII_MODE | 1 | 5.06 - 5.21 | y | GMII MAC | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII4_PORT_ENABLED | 1 | 5.06 - 5.21 | y | Port 4 enabled | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII5_PORT_DISABLED | 1 | 5.06 - 5.21 | y | Port 5 Disabled | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MII_SETUP_AVMNET | 1 | 6.50 | y | MII Setup will be done by AVMNET | 2.6.32.61 | Linux |
| CONFIG_MIPS | 56 | 3.23 - 8.00 | y | Support for the MIPS platform (arch_mips_backtrace.ko, arch_mips_profile.ko, avm.ko, bcm_mips_setup.ko, profiling.ko, setup-bus.ko, setup-irq.ko) | 2.4.17 - 4.9.325 | Linux |
| CONFIG_MIPS32 | 4 | 4.74 - 4.87 | y | Support for the MIPS32 platform (ioremap.ko, module-elf32.ko, pgtable-32.ko, scall32-o32.ko) | 2.6.13.1 | Linux |
| CONFIG_MIPS_AR7WRD | 14 | 3.23 - 4.01 | y | Texas Instruments AR7WRD reference board | 2.4.17 | Linux |
| CONFIG_MIPS_ASID_BITS | 15 | 7.19 - 8.00 | 8 | Size of the Address Space IDentification in Bits | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MIPS_ASID_SHIFT | 15 | 7.19 - 8.00 | 0 | Address Space IDentification shift in Bits | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MIPS_AVALANCHE_ADAM2 | Avalanche SoC (NSP) Adam2 Support (adam2_proc.ko) | Linux | ||||
| CONFIG_MIPS_AVALANCHE_ADAM2_JMP_TBL | Enables the original ADAM2 Bootloader-Environment API (adam2_proc.ko, fixenv.ko, getenv.ko, getienv.ko, setenv.ko, unsetenv.ko) | Linux | ||||
| CONFIG_MIPS_AVALANCHE_CPMAC | 14 | 3.23 - 4.01 | m | Avalanche CPMAC network driver (avalanche_cpmac.ko) | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_CPMAC_ADM6996 | 9 | 3.87 - 4.01 | y | ADM6996 switch support for Avalanche CPMAC | Linux | |
| CONFIG_MIPS_AVALANCHE_DMA | 14 | 3.23 - 4.01 | y | Avalanche McDMA enable | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_FAST_BRIDGE | 14 | 3.23 - 4.01 | y | TODO [Networking options] | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_INTC | 20 | 3.23 - 6.06 | y | TODO [Machine selection] | 2.4.17 - 2.6.32.60 | Linux |
| CONFIG_MIPS_AVALANCHE_LED | 15 | 3.23 - 4.87 | m, y | LED support on the MIPS avalanche (avalanche_led.ko, hardware_error.ko, led_drv.ko, led_hal.ko) | 2.4.17 - 2.6.13.1 | Linux |
| CONFIG_MIPS_AVALANCHE_PAGING | 14 | 3.23 - 4.01 | y | TODO [Machine selection] | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_SOC | 14 | 3.23 - 4.01 | y | Support for TI Avalanche SoC (AR7) | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_USB | 14 | 3.23 - 4.01 | m | AVM USB NET support (avalanche_usb.ko) | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_USB_CDROM | 14 | 3.23 - 4.01 | y | CDROM Mode support for AVM USB NET | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_USB_DEBUG | 14 | 3.23 - 4.01 | 0 | Debug print support for AVM USB NET | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_VLYNQ | 14 | 3.23 - 4.01 | m | Avalanche VLYNQ driver (avalanche_vlynq.ko) | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS | 14 | 3.23 - 4.01 | 1, 2 | Number of ports for Avalanche VLYNQ driver | 2.4.17 | Linux |
| CONFIG_MIPS_AVALANCHE_WDTIMER | Avalanche Watch Dog Timer support (wdtimer.ko) | Linux | ||||
| CONFIG_MIPS_BOARDS_GEN | 11 | 4.68 - 6.06 | y | MIPS evaluation boards generic support (core.ko, irq-msc01.ko) | 2.6.13.1 - 2.6.32.60 | Linux |
| CONFIG_MIPS_CLOCK_VSYSCALL | 11 | 7.01 - 8.00 | y | MIPS VDSO SYSCALL varoant of gettimeofday | 4.4.60 - 4.9.276 | Linux |
| CONFIG_MIPS_CM | 12 | 7.19 - 8.00 | y | MIPS Coherence Manager (CM) (mips-cm.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MIPS_CMDLINE_DTB_EXTEND | 4 | 7.21 - 8.00 | y | Extend dtb kernel arguments with bootloader arguments | 4.4.60 - 4.9.276 | Linux |
| CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER | 7 | 7.01 - 7.50 | y | Bootloader kernel arguments if available | 4.4.60 - 4.9.276 | Linux |
| CONFIG_MIPS_CMDLINE_FROM_DTB | 10 | 7.19 - 8.00 | y | Dtb kernel arguments if available | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MIPS_CMP | 12 | 6.51 - 8.00 | y | MIPS CMP framework support (DEPRECATED) (malta-amon.ko, smp-cmp.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MIPS_CPMAC_PORTS | 14 | 3.23 - 4.01 | 1, 2 | Number of ports for the CPMAC network driver | 2.4.17 | Linux |
| CONFIG_MIPS_CPU_SCACHE | 12 | 6.51 - 8.00 | y | MIPS32/MIPS64 L2 cache handler (sc-mips.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MIPS_EMERALD | 14 | 3.23 - 4.01 | y | TODO [Kernel hacking] | 2.4.17 | Linux |
| CONFIG_MIPS_EXTERNAL_TIMER | 12 | 7.19 - 8.00 | y | TODO [CPU Power Management] | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MIPS_FPU_EMU | 16 | 5.21 - 7.29 | y | Enable FPU emulation (dp_add.ko, dp_cmp.ko, dp_div.ko, dp_fint.ko, dp_flong.ko, dp_frexp.ko, dp_fsp.ko, dp_logb.ko, dp_modf.ko, dp_mul.ko, dp_scalb.ko, dp_simple.ko, dp_sqrt.ko, dp_sub.ko, dp_tint.ko, dp_tlong.ko, ieee754.ko, ieee754d.ko, ieee754dp.ko, ieee754m.ko, ieee754sp.ko, ieee754xcpt.ko, sp_add.ko, sp_cmp.ko, sp_div.ko, sp_fdp.ko, sp_fint.ko, sp_flong.ko, sp_frexp.ko, sp_logb.ko, sp_modf.ko, sp_mul.ko, sp_scalb.ko, sp_simple.ko, sp_sqrt.ko, sp_sub.ko, sp_tint.ko, sp_tlong.ko) | 2.6.32.41 - 3.10.107 | Linux |
| CONFIG_MIPS_FPU_EMULATOR | 9 | 7.01 - 7.62 | y | MIPS FPU Emulator | 3.18.24 - 4.9.231 | Linux |
| CONFIG_MIPS_FUSIV | 2 | 4.76 - 6.86 | y | Don't break old AVM source code (avm.ko, ikan_wdt.ko) | 2.6.19.2 - 2.6.28.8 | Linux |
| CONFIG_MIPS_GIC | 12 | 7.19 - 8.00 | y | MIPS Global Interrupt Controller (GIC) support (irq-mips-gic.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MIPS_GIC_IPI | 7 | 6.51 - 7.15 | y | (smp-gic.ko) | 3.10.12 - 3.10.104 | Linux |
| CONFIG_MIPS_L1_CACHE_SHIFT | 45 | 4.68 - 8.00 | 5, 6 | MIPS L1 Cache Alignment Shift in bits | 2.6.13.1 - 4.9.325 | Linux |
| CONFIG_MIPS_MACHINE | 6 | 7.01 - 7.27 | y | MIPS machine selection (mips_machine.ko) | 4.4.60 | Linux |
| CONFIG_MIPS_MT | 21 | 5.06 - 8.00 | y | MIPS MultiThreading support (mips-mt.ko, yield_context.ko) | 2.6.28.8 - 4.9.325 | Linux |
| CONFIG_MIPS_MT_DISABLED | 14 | 4.68 - 6.86 | y | Disable multithreading support | 2.6.19.2 - 2.6.32.61 | Linux |
| CONFIG_MIPS_MT_FPAFF | 15 | 6.31 - 7.29 | y | Dynamic FPU affinity for FP-intensive threads (mips-mt-fpaff.ko) | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MIPS_MT_SMP | 15 | 6.51 - 8.00 | y | MIPS MT SMP support (1 TC on each available VPE) (smp-mt.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MIPS_MT_SMTC | 6 | 6.31 - 6.87 | y | Use all TCs on all VPEs for SMP (DEPRECATED) (cevt-smtc.ko, ifxmips_smtc.ko, malta-smtc.ko, smtc-asm.ko, smtc-proc.ko, smtc.ko) | 2.6.32.61 - 3.10.73 | Linux |
| CONFIG_MIPS_MT_SMTC_IM_BACKSTOP | 4 | 6.51 - 6.84 | y | Use per-TC register bits as backstop for inhibited IM bits | 3.10.73 | Linux |
| CONFIG_MIPS_MT_TC_LIMIT | 4 | 6.51 - 6.84 | 2 | SMTC: Limit usable TCs | 3.10.73 | Linux |
| CONFIG_MIPS_NO_APPENDED_DTB | 19 | 7.01 - 8.00 | y | TODO [MIPS specific enhancements] | 4.4.60 - 4.9.325 | Linux |
| CONFIG_MIPS_OHIO | 4 | 4.01 - 4.87 | y | Support for the AVM Board family using the OHIO CPU (core.ko, ti_sangam.ko) | 2.6.13.1 | Linux |
| CONFIG_MIPS_OHIO_PHY_MEMSTART | 4 | 4.74 - 4.87 | 0x14000000 | Ohio physical ram start | 2.6.13.1 | Linux |
| CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | 15 | 6.51 - 8.00 | y | CPU has MIPS MT per TC counters | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MIPS_PLATFORM_DEVICES | 6 | 7.01 - 7.27 | y | MIPS Platform Specific Device Drivers | 4.4.60 | Linux |
| CONFIG_MIPS_RAW_APPENDED_DTB | 2 | 7.50 | y | [MIPS specific enhancements] | 4.9.276 | Linux |
| CONFIG_MIPS_SANGAM | 14 | 3.23 - 4.01 | y | Support for the TI Sangam SoC (ti_sangam.ko) | 2.4.17 | Linux |
| CONFIG_MIPS_SANGAM_ATM | 14 | 3.23 - 4.01 | m | TI DSL / ATM drivers for the Sangam (tiatm.ko) | 2.4.17 | Linux |
| CONFIG_MIPS_SPRAM | 21 | 7.01 - 8.00 | y | MIPS SPRAM support (spram.ko) | 4.4.60 - 4.9.325 | Linux |
| CONFIG_MIPS_TI | 14 | 3.23 - 4.01 | y | Texas Instruments MIPS Machine selection | 2.4.17 | Linux |
| CONFIG_MIPS_UR8 | 7 | 4.68 - 6.06 | y | Texas Instruments UR8 Machine selection (ar7wdt_hw_26.ko, avm.ko, core.ko) | 2.6.19.2 - 2.6.32.60 | Linux |
| CONFIG_MIPS_UR8_C55_MEMORY | 6 | 4.78 - 6.06 | 0x100, 0x40 | UR8 c55 Memory allocation in KBytes (0 disabled) | 2.6.19.2 - 2.6.32.60 | Linux |
| CONFIG_MIPS_UR8_PHY_MEMSTART | 7 | 4.68 - 6.06 | 0x14000000 | UR8 physical ram start | 2.6.19.2 - 2.6.32.60 | Linux |
| CONFIG_MIPS_UR8_WLAN_MEMORY | 3 | 4.86 - 6.06 | 0x180 | UR8 WLAN Memory allocation in KBytes (0 disabled) | 2.6.19.2 - 2.6.32.60 | Linux |
| CONFIG_MIPS_V2USB_EVM | 10 | 3.65 - 4.01 | y | TODO [Machine selection] | Linux | |
| CONFIG_MIPS_VPE_LOADER | 3 | 5.06 - 6.50 | y | VPE loader support. (vpe.ko) | 2.6.28.8 - 2.6.32.61 | Linux |
| CONFIG_MIPS_VPE_LOADER_TOM | 3 | 5.06 - 6.50 | y | Load VPE program into memory hidden from linux | 2.6.28.8 - 2.6.32.61 | Linux |
| CONFIG_MIPS_YAMUNA | 6 | 4.68 - 6.06 | y | TI MIPS YAMUNA (aka TNETD84XX) | 2.6.19.2 - 2.6.32.60 | Linux |
| CONFIG_MISC_DEVICES | 1 | 7.29 | y | Misc devices | 2.6.39.4 | Linux |
| CONFIG_MISC_FILESYSTEMS | 56 | 5.05 - 8.00 | y | Miscellaneous filesystems | 2.6.32.21 - 5.15.153 | Linux |
| CONFIG_MISDN | 2 | 7.29 | m | Modular ISDN driver (mISDN_core.ko) | 2.6.39.4 | Linux |
| CONFIG_MISDN_AVMFRITZ | Support for AVM FRITZ!CARD PCI (avmfritz.ko) | Linux | ||||
| CONFIG_MLOCK_APPS | 4 | 7.04 - 7.57 | y | mlock all started elf's text sections | 2.6.39.4 - 4.9.279 | Linux |
| CONFIG_MMC | 17 | 6.52 - 8.00 | y | MMC/SD/SDIO card support (mmc_core.ko) | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MMC_ARMMMCI | 7 | 6.52 - 7.90 | y | ARM AMBA Multimedia Card Interface support (armmmci.ko, mmci.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MMC_BLOCK | 17 | 6.52 - 8.00 | y | MMC block device driver (mmc_block.ko) | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MMC_BLOCK_BOUNCE | 14 | 6.52 - 7.81 | y | Use bounce buffer for simple hosts | 2.6.39.4 - 4.9.279 | Linux |
| CONFIG_MMC_BLOCK_MINORS | 17 | 6.52 - 8.00 | 16, 32, 8 | Number of minors per block device | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MMC_QCOM_DML | 7 | 6.52 - 7.90 | y | Qualcomm Data Mover for SD Card Controller (armmmci.ko, mmci_qcom_dml.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MMC_QCOM_TUNING | 5 | 6.52 - 7.81 | y | Qualcomm Atheros SD Card Tuning for UHS (mmci_qcom_tuning.ko) | 3.14.43 - 4.4.271 | Linux |
| CONFIG_MMC_SDHCI | 17 | 6.52 - 8.00 | y | Secure Digital Host Controller Interface support (sdhci.ko) | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MMC_SDHCI_ACPI | 4 | 7.04 - 8.00 | y | SDHCI support for ACPI enumerated SDHCI controllers (sdhci-acpi.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MMC_SDHCI_IO_ACCESSORS | 10 | 7.04 - 8.00 | y | Selected by the drivers that need to overwrite SDHCI IO memory accessors | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MMC_SDHCI_MSM | 8 | 6.52 - 7.90 | y | Qualcomm SDHCI Controller Support (sdhci-msm.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MMC_SDHCI_MSM_ICE | 2 | 7.61 - 7.90 | y | Qualcomm Inline Crypto Engine for SDHCI core (sdhci-msm-ice.ko) | 5.4.213 | Linux |
| CONFIG_MMC_SDHCI_PCI | 1 | 7.29 | y | SDHCI support on PCI bus (sdhci-pci.ko) | 2.6.39.4 | Linux |
| CONFIG_MMC_SDHCI_PLTFM | 12 | 6.52 - 7.90 | y | SDHCI platform and OF driver helper (sdhci-platform.ko, sdhci-pltfm.ko) | 2.6.39.4 - 5.4.213 | Linux |
| CONFIG_MMC_SDHCI_PUMA6 | 1 | 7.29 | y | SDHCI support on the Cat Mountain SoC (sdhci-platform.ko, sdhci-puma6.ko) | 2.6.39.4 | Linux |
| CONFIG_MMC_SDHCI_PUMA7 | 3 | 7.04 - 7.57 | y | SDHCI support on the Cougar Mountain SoC (sdhci-puma7.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MMC_WBSD | 4 | 7.04 - 8.00 | m | Winbond W83L51xD SD/MMC Card Interface support (wbsd.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MMU | 68 | 4.68 - 8.00 | y | Support for memory management hardware (bugs.ko, fault-armv.ko, flush.ko, idmap.ko, ioremap.ko, min_addr.ko, mmap.ko, mmu.ko, pageattr.ko, pgd.ko, proc.ko, vmregion.ko) | 2.6.13.1 - 5.15.153 | Linux |
| CONFIG_MMU_NOTIFIER | 1 | 7.29 | y | MMU Notifier support (mmu_notifier.ko) | 2.6.39.4 | Linux |
| CONFIG_MM_OWNER | 8 | 6.51 - 7.29 | y | cgroups support for the memory resource controller | 2.6.39.4 - 3.10.104 | Linux |
| CONFIG_MODIFY_LDT_SYSCALL | 4 | 7.14 - 8.00 | y | Enable the LDT (local descriptor table) | 4.9.175 - 5.15.153 | Linux |
| CONFIG_MODPROBE_PATH | 4 | 7.61 - 8.00 | '/sbin/modprobe' | Path to modprobe binary | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MODULES | 79 | 3.23 - 8.00 | y | Enable loadable module support (armksyms.ko, kmod.ko, ksyms.ko, mips_ksyms.ko, module.ko, netsyms.ko, proc-syms.ko) | 2.4.17 - 5.15.153 | Linux |
| CONFIG_MODULES_TREE_LOOKUP | 33 | 7.14 - 8.00 | y | Use a latched RB-tree for module address lookup | 4.4.60 - 5.15.153 | Linux |
| CONFIG_MODULES_USE_ELF_REL | 47 | 6.51 - 8.00 | y | Modules only use ELF REL relocations | 3.10.12 - 5.15.153 | Linux |
| CONFIG_MODULE_BUILD_IN | 1 | 7.62 | y | Realtek RTL86900 SDK | 3.18.24 | Linux |
| CONFIG_MODULE_COMPRESS_NONE | 4 | 7.61 - 8.00 | y | Do not compress modules | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MODULE_FORCE_LOAD | 5 | 7.04 - 8.00 | y | Forced module loading | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MODULE_FORCE_UNLOAD | 6 | 4.99 - 8.00 | y | Forced module unloading | 2.6.19.2 - 5.15.153 | Linux |
| CONFIG_MODULE_STRIPPED | 12 | 6.52 - 7.50 | y | Reduce module size | 3.14.43 - 4.9.276 | Linux |
| CONFIG_MODULE_UNLOAD | 68 | 4.68 - 8.00 | y | Module unloading | 2.6.13.1 - 5.15.153 | Linux |
| CONFIG_MODVERSIONS | 20 | 4.99 - 8.00 | y | Set version information on all module symbols | 2.6.19.2 - 5.15.153 | Linux |
| CONFIG_MONOSTEREO_SAMEJACK | 1 | 4.99 | y | Mono and Stereo on same jacks | 2.6.19.2 | Linux |
| CONFIG_MOUSE_PS2 | 2 | 4.99 - 7.29 | y | PS/2 mouse (psmouse.ko) | 2.6.19.2 - 2.6.39.4 | Linux |
| CONFIG_MPILIB | 15 | 6.52 - 8.00 | m, y | MPI multiprecision maths library (from gpg) (mpi.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MPLS | 6 | 7.61 - 8.00 | y | MultiProtocol Label Switching | 5.4.213 - 5.15.153 | Linux |
| CONFIG_MPTCP | 3 | 6.98 - 7.24 | y | MPTCP protocol (mptcp.ko) | 4.1.38 - 4.1.52 | Linux |
| CONFIG_MPTCP_FULLMESH | 3 | 6.98 - 7.24 | y | MPTCP Full-Mesh Path-Manager (mptcp_fullmesh.ko) | 4.1.38 - 4.1.52 | Linux |
| CONFIG_MPTCP_PM_ADVANCED | 3 | 6.98 - 7.24 | y | MPTCP: advanced path-manager control | 4.1.38 - 4.1.52 | Linux |
| CONFIG_MQ_IOSCHED_DEADLINE | 5 | 7.39 - 8.00 | y | MQ version of the deadline IO scheduler (mq-deadline.ko) | 4.19.183 - 5.15.153 | Linux |
| CONFIG_MQ_IOSCHED_KYBER | 1 | 7.39 - 8.00 | y | MQ version of the kyber IO scheduler (kyber-iosched.ko) | 4.19.183 | Linux |
| CONFIG_MRPC | 7 | 7.04 - 8.00 | y | RPC over HW Mailbox support (mrpc.ko) | 3.12.14 - 5.15.153 | Linux |
| CONFIG_MRPC_AVMCFG_CLIENT | 3 | 7.04 - 7.57 | y | AVM config MRPC client (avmcfg_client.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_AVMCFG_SERVER | 4 | 7.04 - 8.00 | y | AVM config MRPC server (avmcfg_server.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_AVM_CRASHLOG | 7 | 7.39 - 8.00 | y | AVM crashlog MRPC server and client (avm_crashlog_client.ko, avm_crashlog_server.ko) | 4.9.279 - 5.15.153 | Linux |
| CONFIG_MRPC_AVM_DTBO_SERVER | 4 | 7.61 - 8.00 | y | AVM mrpc dtbo server (avm_dtbo_server.ko) | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MRPC_AVM_FWINFO_CLIENT | 3 | 7.39 - 7.57 | y | AVM firmware info client (avm_fw_info_client.ko) | 4.9.279 | Linux |
| CONFIG_MRPC_AVM_FWINFO_SERVER | 4 | 7.39 - 8.00 | y | AVM firmware info server (avm_fw_info_server.ko) | 4.9.279 - 5.15.153 | Linux |
| CONFIG_MRPC_CONNTRACK_CLIENT | 1 | 7.04 - 7.13 | y | Connection tracking MRPC client | 3.12.59 - 3.12.74 | Linux |
| CONFIG_MRPC_CPPI_CLIENT | 7 | 7.04 - 8.00 | y | CPPI MRPC client (cppi_client.ko) | 3.12.14 - 5.15.153 | Linux |
| CONFIG_MRPC_CPPI_SERVER | 7 | 7.04 - 8.00 | y | cppi MRPC server (cppi_server.ko) | 3.12.14 - 5.15.153 | Linux |
| CONFIG_MRPC_GPIO_CLIENT | 4 | 7.04 - 8.00 | y | GPIO MRPC client for NETIP GPIOs (gpio_client.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_GPIO_SERVER | 3 | 7.04 - 7.57 | y | gpio MRPC server (gpio_server.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_HANDSHAKE | 4 | 7.04 - 8.00 | y | handshake mrpc client (handshake_client.ko, handshake_server.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_HANDSHAKE_CLIENT | 3 | 7.04 - 7.57 | y | handshake MRPC client (handshake_client.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_HANDSHAKE_SERVER | 3 | 7.04 - 7.57 | y | handshake MRPC server (handshake_server.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_HIL_CMDS_CLIENT | 1 | 7.04 - 7.13 | y | HIL commands MRPC client | 3.12.59 - 3.12.74 | Linux |
| CONFIG_MRPC_HIL_EVENTS_SERVER | 4 | 7.04 - 8.00 | y | ARM to ATOM HIL events over HW Mailbox (hil_events_server.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_MODPHY_CLIENT | 4 | 7.04 - 8.00 | y | modphy mrpc client (modphy_client.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_MODPHY_SERVER | 3 | 7.04 - 7.57 | y | modphy MRPC server (modphy_server.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_PMU_CLIENT | 4 | 7.04 - 8.00 | y | pmu mrpc client (pmu_client.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_PMU_SERVER | 3 | 7.04 - 7.57 | y | pmu MRPC server (pmu_server.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_PP_CLIENT | 1 | 7.04 - 7.13 | y | PP MRPC client | 3.12.59 - 3.12.74 | Linux |
| CONFIG_MRPC_REMOTE_CONFIG_CLIENT | 3 | 7.04 - 7.57 | y | Remote Config client (remote_config_client.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_REMOTE_CONFIG_SERVER | 4 | 7.04 - 8.00 | y | Remote Config server (remote_config_server.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_SGC_CLIENT | 3 | 7.04 - 7.57 | y | Session Group Counter client (sgc_client.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MRPC_SGC_SERVER | 4 | 7.04 - 8.00 | y | Session Group Counter server (sgc_server.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MRPC_WIFI_PROXY_CLIENT | 2 | 7.04 - 7.24 | y | WiFi proxy MRPC client (wifi_proxy_client.ko) | 3.12.59 - 4.9.199 | Linux |
| CONFIG_MSDOS_FS | 53 | 4.68 - 8.00 | m, n, y | MSDOS fs support (msdos.ko) | 2.6.13.1 - 5.4.213 | Linux |
| CONFIG_MSDOS_PARTITION | 74 | 3.23 - 8.00 | y | PC BIOS (MSDOS partition tables) support (msdos.ko) | 2.4.17 - 5.15.153 | Linux |
| CONFIG_MSM_GCC_8660 | 2 | 6.52 - 6.92 | y | MSM8660 Global Clock Controller (gcc-msm8660.ko) | 3.14.43 | Linux |
| CONFIG_MSM_GCC_8960 | 2 | 6.52 - 6.92 | y | APQ8064/MSM8960 Global Clock Controller (gcc-msm8960.ko) | 3.14.43 | Linux |
| CONFIG_MSM_GCC_8974 | 2 | 6.52 - 6.92 | y | MSM8974 Global Clock Controller (gcc-msm8974.ko) | 3.14.43 | Linux |
| CONFIG_MSM_GLINK | 4 | 7.19 - 7.50 | y | Generic Link (G-Link) (glink.ko, glink_debugfs.ko, glink_ssr.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_GLINK_LOOPBACK_SERVER | 4 | 7.19 - 7.50 | y | Generic Link (G-Link) Loopback Server (glink_loopback_server.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_GLINK_PKT | 4 | 7.19 - 7.50 | y | Enable device interface for GLINK packet channels (msm_glink_pkt.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_GLINK_SMEM_NATIVE_XPRT | 3 | 7.19 - 7.50 | y | Generic Link (G-Link) SMEM Native Transport (glink_smem_native_xprt.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_IPC_ROUTER_GLINK_XPRT | 4 | 7.19 - 7.50 | y | MSM GLINK XPRT Layer (ipc_router_glink_xprt.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_IPC_ROUTER_MHI_XPRT | 3 | 7.19 - 7.50 | y | MSM MHI XPRT Layer (ipc_router_mhi_xprt.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_MHI | 3 | 7.19 - 7.50 | y | Modem Host Interface Driver (diagfwd_mhi.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_MHI_DEBUG | 3 | 7.19 - 7.50 | y | MHI debug support | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_MHI_UCI | 3 | 7.19 - 7.50 | y | MHI Usperspace Control Interface Driver | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_MMCC_8960 | 2 | 6.52 - 6.92 | y | MSM8960 Multimedia Clock Controller (mmcc-msm8960.ko) | 3.14.43 | Linux |
| CONFIG_MSM_MMCC_8974 | 2 | 6.52 - 6.92 | y | MSM8974 Multimedia Clock Controller (mmcc-msm8974.ko) | 3.14.43 | Linux |
| CONFIG_MSM_PCIE | 2 | 6.52 - 6.92 | y | MSM PCIe support (pcie.ko, pcie_irq.ko) | 3.14.43 | Linux |
| CONFIG_MSM_QMI_INTERFACE | 5 | 7.19 - 7.81 | y | MSM QMI Interface Library (qmi_interface.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MSM_RPM_LOG | 4 | 6.52 - 7.62 | y | QCOM Resource Power Manager Log Driver (rpm_log.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MSM_RPM_RPMSG | 4 | 7.29 - 7.81 | y | QCA Resource Power Manager (RPM) over GLINK RPMSG (rpm-rpmsg.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MTD | 76 | 3.23 - 8.00 | y | Memory Technology Device (MTD) support (chipreg.ko, map_funcs.ko, mtd.ko, mtdcore.ko) | 2.4.17 - 5.15.153 | Linux |
| CONFIG_MTDRAM_ERASE_SIZE | 11 | 6.31 - 7.29 | 128 | MTDRAM erase block size in KiB | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MTDRAM_TOTAL_SIZE | 11 | 6.31 - 7.29 | 4096 | MTDRAM device size in KiB | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MTD_AFS_PARTS | 3 | 7.04 - 7.57 | y | ARM Firmware Suite partition parsing (afs.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MTD_AR7240_SPI_FLASH | 2 | 6.30 - 6.83 | y | Support for ar7240 spi flash (ar7240_flash.ko) | 2.6.32.61 | Linux |
| CONFIG_MTD_AR7_PARTS | 3 | 7.04 - 7.57 | y | TI AR7 partitioning support (ar7part.ko) | 3.12.14 - 4.9.279 | Linux |
| CONFIG_MTD_ATH_FLASH | 5 | 7.01 - 7.27 | y | Support for Atheros spi flash (ath_flash.ko) | 4.4.60 | Linux |
| CONFIG_MTD_AVALANCHE | 14 | 3.23 - 4.01 | y | Avalanche MTD flash driver (avalanche-flash.ko) | 2.4.17 | Linux |
| CONFIG_MTD_AVALANCHE_BUSWIDTH | 14 | 3.23 - 4.01 | 2 | Bus width of Avalanche flash in bytes | 2.4.17 | Linux |
| CONFIG_MTD_AVALANCHE_LEN | 14 | 3.23 - 4.01 | 0x400000 | Size of Avalanche flash in bytes | 2.4.17 | Linux |
| CONFIG_MTD_AVALANCHE_PARTITIONS | 14 | 3.23 - 4.01 | 6 | Number of partitions on Avalanche flash | 2.4.17 | Linux |
| CONFIG_MTD_AVALANCHE_START | 14 | 3.23 - 4.01 | 0x10000000 | Physical base address of Avalanche flash | 2.4.17 | Linux |
| CONFIG_MTD_AVM_MTDRAM | 9 | 7.27 - 8.00 | y | AVM mtdram driver (avm_mtdram.ko) | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_BCM963XX | 3 | 6.54 - 8.00 | y | Broadcom 963xx ADSL board flash memory support (bcm963xx-flash.ko, bcm963xx.ko) | 3.4.11 - 4.19.183 | Linux |
| CONFIG_MTD_BCM_SPI_NAND | 3 | 6.54 - 7.31 | y | Broadcom 63xx SPI NAND MTD support (bcm63xx_spinand.ko, bcm963xx_mtd.ko) | 3.4.11 - 4.1.52 | Linux |
| CONFIG_MTD_BLKDEVS | 55 | 5.05 - 8.00 | y | Common interface to block layer for MTD 'translation layers' (mtd_blkdevs.ko) | 2.6.28.8 - 5.15.153 | Linux |
| CONFIG_MTD_BLOCK | 76 | 3.23 - 8.00 | y | Caching block device access to MTD devices (mtd_blkdevs.ko, mtdblock.ko) | 2.4.17 - 5.15.153 | Linux |
| CONFIG_MTD_BLOCK2MTD | 23 | 4.99 - 8.00 | y | MTD using block device (block2mtd.ko) | 2.6.19.2 - 5.15.153 | Linux |
| CONFIG_MTD_BRCMNAND | 2 | 6.54 - 6.85 | y | Broadcom NAND controller support (bcm63xx-nand.ko, brcmnand_base.ko, brcmnand_bbt.ko) | 3.4.11 | Linux |
| CONFIG_MTD_CFI | 52 | 3.23 - 8.00 | y | Detect flash chips by Common Flash Interface (CFI) probe (cfi_probe.ko) | 2.4.17 - 5.4.213 | Linux |
| CONFIG_MTD_CFI_ADV_OPTIONS | 38 | 3.23 - 8.00 | y | Flash chip driver advanced configuration options | 2.4.17 - 4.9.325 | Linux |
| CONFIG_MTD_CFI_AMDSTD | 52 | 3.23 - 8.00 | y | Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips) (cfi_cmdset_0002.ko) | 2.4.17 - 5.4.213 | Linux |
| CONFIG_MTD_CFI_AMDSTD_RETRY | 4 | 4.74 - 4.87 | 0 | Retry failed commands (erase/program) | 2.6.13.1 | Linux |
| CONFIG_MTD_CFI_B2 | 14 | 3.23 - 4.01 | y | Support CFI devices on a physical bus which is 16 bits wide | 2.4.17 | Linux |
| CONFIG_MTD_CFI_GEOMETRY | 37 | 3.23 - 8.00 | y | Specific CFI Flash geometry selection | 2.4.17 - 4.9.325 | Linux |
| CONFIG_MTD_CFI_I1 | 76 | 3.23 - 8.00 | y | Support 1-chip flash interleave | 2.4.17 - 5.15.153 | Linux |
| CONFIG_MTD_CFI_I2 | 54 | 5.05 - 8.00 | y | Support 2-chip flash interleave | 2.6.28.8 - 5.15.153 | Linux |
| CONFIG_MTD_CFI_INTELEXT | 27 | 3.87 - 8.00 | y | Support for CFI command set 0001 (Intel/Sharp chips) (cfi_cmdset_0001.ko) | 2.6.13.1 - 5.4.213 | Linux |
| CONFIG_MTD_CFI_NOSWAP | 38 | 3.23 - 8.00 | y | NO swap | 2.4.17 - 4.9.325 | Linux |
| CONFIG_MTD_CFI_STAA | 10 | 5.06 - 7.29 | y | Support for CFI command set 0020 (ST (Advanced Architecture) chips) (cfi_cmdset_0020.ko) | 2.6.28.8 - 3.10.107 | Linux |
| CONFIG_MTD_CFI_UTIL | 41 | 4.68 - 8.00 | y | Common Flash Interface (CFI) support (cfi_util.ko) | 2.6.13.1 - 5.4.213 | Linux |
| CONFIG_MTD_CHAR | 27 | 4.68 - 7.29 | y | Direct char device access to MTD devices (mtdchar.ko) | 2.6.13.1 - 3.4.11 | Linux |
| CONFIG_MTD_CMDLINE_PARTS | 54 | 4.68 - 8.00 | y | Command line partition table parsing (cmdlinepart.ko) | 2.6.13.1 - 5.15.153 | Linux |
| CONFIG_MTD_CMDLINE_PARTS_EXT | 7 | 7.29 - 8.00 | y | Support for multiple command line partition table arguments | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_COMPLEX_MAPPINGS | 45 | 5.05 - 8.00 | y | Support non-linear mappings of flash chips | 2.6.28.8 - 5.4.213 | Linux |
| CONFIG_MTD_CONCAT | 7 | 5.06 - 6.87 | y | MTD concatenating support (mtdconcat.ko) | 2.6.28.8 - 2.6.32.61 | Linux |
| CONFIG_MTD_DMA_NAND_XWAY | 7 | 6.51 - 7.15 | y | Lantiq xway DMA NAND suppport (xway_dmanand.ko) | 3.10.12 - 3.10.104 | Linux |
| CONFIG_MTD_GEN_PROBE | 52 | 3.23 - 8.00 | y | Generic flash chip probe code helpers (gen_probe.ko) | 2.4.17 - 5.4.213 | Linux |
| CONFIG_MTD_IFX_HSNAND | 8 | 6.31 - 7.29 | y | IFX MTD HSNAND Flash Driver (ifxmips_mtd_dmanand.ko, ifxmips_mtd_hsnand.ko, ifxmips_mtd_nand_ecc.ko) | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MTD_IFX_HSNAND_FLASH_SIZE | 6 | 6.31 - 7.29 | 4 | Maximum size for IFX flash area (MB) | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MTD_IFX_NAND | 2 | 5.06 - 5.51 | y | IFX MTD NAND Flash Driver (ifxmips_mtd_nand.ko) | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MTD_IFX_NAND_FLASH_SIZE | 2 | 5.06 - 5.51 | 128 | Maximum size for IFX flash area (MB) | 2.6.28.8 - 2.6.32.41 | Linux |
| CONFIG_MTD_IFX_NAND_LATCH_ENABLE | 8 | 5.50 - 7.29 | y | Enable Latch mode in the NAND drivers | 2.6.32.41 - 3.10.107 | Linux |
| CONFIG_MTD_JEDECPROBE | 17 | 4.74 - 8.00 | y | Detect non-CFI AMD/JEDEC-compatible flash chips (jedec_probe.ko) | 2.6.13.1 - 4.9.325 | Linux |
| CONFIG_MTD_LANTIQ | 13 | 6.51 - 7.29 | y | Lantiq SoC NOR support (lantiq-flash.ko) | 3.10.12 - 3.10.107 | Linux |
| CONFIG_MTD_LTQ_SPINAND | 2 | 7.21 - 8.00 | y | Lantiq Generic SPI-Nand device support (ltq_spinand.ko) | 4.9.218 - 4.9.276 | Linux |
| CONFIG_MTD_M25P80 | 22 | 5.25 - 8.00 | n, y | Support most SPI Flash chips (AT26DF, M25P, W25X, ...) (m25p80.ko) | 2.6.28.8 - 4.9.325 | Linux |
| CONFIG_MTD_MAP_BANK_WIDTH_1 | 54 | 5.05 - 8.00 | y | Support 8-bit buswidth | 2.6.28.8 - 5.15.153 | Linux |
| CONFIG_MTD_MAP_BANK_WIDTH_2 | 65 | 4.68 - 8.00 | y | Support 16-bit buswidth | 2.6.13.1 - 5.15.153 | Linux |
| CONFIG_MTD_MAP_BANK_WIDTH_4 | 61 | 4.68 - 8.00 | y | Support 32-bit buswidth | 2.6.19.2 - 5.15.153 | Linux |
| CONFIG_MTD_MSM_QPIC_NAND | MSM QPIC NAND Device Support | Linux | ||||
| CONFIG_MTD_MTDRAM | 11 | 6.31 - 7.29 | m, n | Test driver using RAM (mtdram.ko) | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MTD_NAND | 31 | 5.06 - 8.00 | y | NAND Device Support (nand.ko, nand_ecc.ko) | 2.6.28.8 - 4.19.183 | Linux |
| CONFIG_MTD_NAND_ATH | Support for NAND on Atheros board (ath_avmnand.ko, ath_nand.ko) | Linux | ||||
| CONFIG_MTD_NAND_AVM | 1 | 7.27 | y | Nand flash support for Qualcomm-Atheros SoCs 955X (AVM) (ath_avmnand.ko) | 4.4.60 | Linux |
| CONFIG_MTD_NAND_AVM_FIXUP | 10 | 7.19 - 8.00 | y | Build with AVM-specific quirks (nand_avm.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MTD_NAND_BCH | 10 | 7.19 - 8.00 | y | NAND software BCH ECC support (nand_bch.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MTD_NAND_BRCMNAND | 3 | 6.98 - 8.00 | y | Broadcom STB NAND controller (bcm63138_nand.ko, bcm6368_nand.ko, bcm63xx_nand.ko, brcmnand.ko, brcmstb_nand.ko, iproc_nand.ko) | 4.1.38 - 4.19.183 | Linux |
| CONFIG_MTD_NAND_CORE | 2 | 7.61 - 7.90 | y | [Mapping drivers for chip access] (nandcore.ko) | 5.4.213 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM | 1 | 6.86 | y | Support for the AVM Direct-NAND low level Interface (direct_avm.ko) | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_ALE | 1 | 6.86 | 19 | GPIO number for the ALE signal used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_CLE | 1 | 6.86 | 18 | GPIO number for the CLE signal used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_DATA | 1 | 6.86 | 0x1E000000 | Base of the data reagion used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_GPIO | 1 | 6.86 | y | Direct NAND controlled via gpio | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_NCE0 | 1 | 6.86 | 16 | GPIO number for the /CE signal for chip 0 used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_NCE1 | 1 | 6.86 | 17 | GPIO number for the /CE signal for chip 1 used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_NWP | 1 | 6.86 | 20 | GPIO number for the /WP signal used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_READY0 | 1 | 6.86 | 21 | GPIO number for the ready signal for nand chip 0 used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_DIRECT_AVM_READY1 | 1 | 6.86 | 7 | GPIO number for the ready signal for nand chip 1 used by the AVM Direct-NAND Interface | 2.6.28.8 | Linux |
| CONFIG_MTD_NAND_ECC | 28 | 6.51 - 8.00 | y | Enable ECC correction algorithm (nand_ecc.ko, nandcore.ko) | 3.4.11 - 4.19.183 | Linux |
| CONFIG_MTD_NAND_ECC_BCH | 10 | 7.19 - 8.00 | y | Support software BCH ECC | 4.9.161 - 4.9.325 | Linux |
| CONFIG_MTD_NAND_ECC_SW_HAMMING | 2 | 7.61 - 7.90 | y | Software Hamming ECC engine (nand_ecc.ko, nandcore.ko) | 5.4.213 | Linux |
| CONFIG_MTD_NAND_IDS | 28 | 5.06 - 8.00 | y | Nand device & manufacturer IDs (nand_ids.ko) | 2.6.28.8 - 4.9.276 | Linux |
| CONFIG_MTD_NAND_PLATFORM | 7 | 6.51 - 7.15 | y | Support for generic platform NAND driver (plat_nand.ko) | 3.10.12 - 3.10.104 | Linux |
| CONFIG_MTD_NAND_QCOM | 7 | 7.19 - 7.90 | y | Support for NAND on QCOM SoCs (qcom_nandc.ko) | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_NAND_SERIAL | 1 | 7.30 | y | Support for SERIAL NAND in QPIC | 4.4.60 | Linux |
| CONFIG_MTD_NAND_VERIFY_WRITE | 4 | 6.31 - 6.87 | y | Verify NAND page writes | 2.6.28.8 - 2.6.32.61 | Linux |
| CONFIG_MTD_NAND_XWAY | 10 | 6.51 - 8.00 | y | Support for NAND on Lantiq XWAY SoC (xway_nand.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MTD_NMYX25 | 1 | 7.29 | y | Support N25Q256 M25P32 SPI Flash chips (nmyx25.ko) | 2.6.39.4 | Linux |
| CONFIG_MTD_NOR_SPIF_G3 | 1 | 7.62 | y | [LPDDR & LPDDR2 PCM memory drivers] | 3.18.24 | Linux |
| CONFIG_MTD_OF_PARTS | 44 | 6.51 - 8.00 | y | OpenFirmware partitioning information support (mtd.ko, ofpart.ko) | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MTD_OHIO | 4 | 4.74 - 4.87 | y | AVM Sangam / Ohio / UR8 / DaVini boot flash device (ohio-flash.ko) | 2.6.13.1 | Linux |
| CONFIG_MTD_PARTITIONED_MASTER | 3 | 7.14 - 7.57 | y | Retain master device when partitioned | 4.9.175 - 4.9.279 | Linux |
| CONFIG_MTD_PARTITIONS | 36 | 3.23 - 7.29 | y | MTD partitioning support (mtd.ko, mtdpart.ko) | 2.4.17 - 2.6.39.4 | Linux |
| CONFIG_MTD_PHRAM | 8 | 4.99 - 8.00 | y | Physical system RAM (phram.ko) | 2.6.19.2 - 5.15.153 | Linux |
| CONFIG_MTD_PHYSMAP | 16 | 4.68 - 7.62 | y | Flash device in physical memory map (physmap.ko) | 2.6.13.1 - 3.18.24 | Linux |
| CONFIG_MTD_PHYSMAP_BANKWIDTH | 13 | 4.68 - 6.86 | 2 | Bank width in octets | 2.6.13.1 - 2.6.28.8 | Linux |
| CONFIG_MTD_PHYSMAP_LEN | 13 | 4.68 - 6.86 | <long> | Physical length of flash mapping | 2.6.13.1 - 2.6.28.8 | Linux |
| CONFIG_MTD_PHYSMAP_OF | 23 | 6.51 - 8.00 | y | Memory device in physical memory map based on OF description (physmap_of.ko, physmap_of_versatile.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MTD_PHYSMAP_START | 13 | 4.68 - 6.86 | <long> | Physical start address of flash mapping | 2.6.13.1 - 2.6.28.8 | Linux |
| CONFIG_MTD_PLATNOR | 6 | 5.06 - 6.87 | y | Map driver for platform device NOR (mtd-nor) (plat-nor.ko) | 2.6.28.8 - 2.6.32.61 | Linux |
| CONFIG_MTD_PLATRAM | 53 | 4.68 - 8.00 | y | Map driver for platform device RAM (mtd-ram) (plat-ram.ko) | 2.6.13.1 - 4.9.325 | Linux |
| CONFIG_MTD_QCOM_NAND | QCOM NAND Device Support (qcom_nand.ko) | Linux | ||||
| CONFIG_MTD_QCOM_SMEM_PARTS | 5 | 7.19 - 7.81 | y | QCOM SMEM partitioning support (qcom_smem_part.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MTD_RAM | 57 | 4.68 - 8.00 | y | Support for RAM chips in bus mapping (map_ram.ko) | 2.6.13.1 - 5.4.213 | Linux |
| CONFIG_MTD_RAW_NAND | 2 | 7.61 - 7.90 | y | Raw/Parallel NAND Device Support (nand.ko) | 5.4.213 | Linux |
| CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK | 11 | 5.06 - 7.29 | -1 | Location of RedBoot partition table | 2.6.28.8 - 3.10.107 | Linux |
| CONFIG_MTD_REDBOOT_PARTS | 11 | 5.06 - 7.29 | y | RedBoot partition table parsing (redboot.ko) | 2.6.28.8 - 3.10.107 | Linux |
| CONFIG_MTD_ROM | 16 | 5.25 - 8.00 | y | Support for ROM chips in bus mapping (map_rom.ko) | 2.6.28.8 - 4.19.183 | Linux |
| CONFIG_MTD_ROOTFS_ROOT_DEV | 22 | 6.51 - 7.90 | y | Automatically set 'rootfs' partition to be root filesystem | 3.10.12 - 5.4.213 | Linux |
| CONFIG_MTD_ROOTFS_SPLIT | 9 | 6.51 - 7.15 | y | Automatically split 'rootfs' partition for squashfs | 3.10.12 - 3.14.43 | Linux |
| CONFIG_MTD_SFL | 3 | 5.25 - 7.29 | y | Generic Serial Flash MTD Driver Support (sfl.ko) | 2.6.28.8 - 3.12.74 | Linux |
| CONFIG_MTD_SPI | 3 | 5.25 - 7.29 | y | Detect spi flash chips by probe (spi_probe.ko, spimap.ko) | 2.6.28.8 - 2.6.39.4 | Linux |
| CONFIG_MTD_SPINAND_GIGADEVICE | 6 | 7.19 - 7.81 | y | SPINAND Devcie Support for Gigadevice (giga_spinand.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MTD_SPINAND_MT29F | 6 | 7.19 - 7.81 | y | SPINAND Device Support for Micron (mt29f_spinand.ko) | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MTD_SPINAND_ONDIEECC | 6 | 7.19 - 7.81 | y | Use SPINAND internal ECC | 4.4.60 - 4.4.271 | Linux |
| CONFIG_MTD_SPI_NOR | 25 | 7.04 - 8.00 | y | SPI-NOR device support (spi-nor.ko) | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE | 4 | 7.61 - 8.00 | y | Disable SWP on flashes with volatile protection bits | 5.15.111 - 5.15.153 | Linux |
| CONFIG_MTD_SPI_NOR_USE_4K_SECTORS | 7 | 7.04 - 8.00 | y | Use small 4096 B erase sectors | 3.12.59 - 5.15.153 | Linux |
| CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT | 1 | 7.61 - 7.90 | 65536 | Maximum flash chip size to use 4K sectors on (in KiB) | 5.4.213 | Linux |
| CONFIG_MTD_SPLIT | 15 | 6.52 - 7.90 | y | Generic MTD split support (mtdsplit.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MTD_SPLIT_FIRMWARE | 13 | 7.01 - 7.90 | y | Automatically split firmware partition for kernel+rootfs | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_SPLIT_FIRMWARE_NAME | 13 | 7.01 - 7.90 | 'firmware' | Firmware partition name | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_SPLIT_FIT_FW | 13 | 7.01 - 7.90 | y | FIT based firmware partition parser (mtdsplit_fit.ko) | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_SPLIT_SQUASHFS_ROOT | 15 | 6.52 - 7.90 | y | Squashfs based root partition parser (mtdsplit_squashfs.ko) | 3.14.43 - 5.4.213 | Linux |
| CONFIG_MTD_SPLIT_SUPPORT | 13 | 7.01 - 7.90 | y | Generic MTD split support | 4.4.60 - 5.4.213 | Linux |
| CONFIG_MTD_UBI | 29 | 6.51 - 8.00 | y | Enable UBI - Unsorted block images (ubi.ko) | 3.4.11 - 5.4.213 | Linux |
| CONFIG_MTD_UBI_BEB_LIMIT | 29 | 6.51 - 8.00 | 20 | Maximum expected bad eraseblock count per 1024 eraseblocks | 3.10.12 - 5.4.213 | Linux |
| CONFIG_MTD_UBI_BEB_RESERVE | 2 | 6.54 - 6.85 | 1 | Percentage of reserved eraseblocks for bad eraseblocks handling | 3.4.11 | Linux |
| CONFIG_MTD_UBI_BLOCK | 11 | 6.98 - 8.00 | y | Read-only block devices on top of UBI volumes (ubi.ko) | 4.1.38 - 5.4.213 | Linux |
| CONFIG_MTD_UBI_GLUEBI | 23 | 6.51 - 8.00 | y | MTD devices emulation driver (gluebi) (avm_mtd_rename_ubi.ko, gluebi.ko, ubi.ko) | 3.4.11 - 5.4.213 | Linux |
| CONFIG_MTD_UBI_GLUEBI_ROOTFS_DEV | 12 | 6.51 - 8.00 | y | Set root filesystem based on rootfs volume name | 3.10.12 - 4.9.325 | Linux |
| CONFIG_MTD_UBI_WL_THRESHOLD | 29 | 6.51 - 8.00 | 4096 | UBI wear-leveling threshold | 3.4.11 - 5.4.213 | Linux |
| CONFIG_MTRR | 5 | 7.04 - 8.00 | y | MTRR (Memory Type Range Register) support | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MTRR_SANITIZER | 5 | 7.04 - 8.00 | y | MTRR cleanup support | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT | 5 | 7.04 - 8.00 | 0, 1 | MTRR cleanup enable value (0-1) | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT | 5 | 7.04 - 8.00 | 1 | MTRR cleanup spare reg num (0-7) | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MTSCHED | 15 | 6.31 - 7.29 | y | Support mtsched priority configuration for TCs (mtsched_proc.ko) | 2.6.32.61 - 3.10.107 | Linux |
| CONFIG_MULTIUSER | 38 | 6.98 - 8.00 | y | Multiple users, groups and capabilities support (groups.ko) | 4.1.38 - 5.15.153 | Linux |
| CONFIG_MULTI_IRQ_HANDLER | 10 | 6.52 - 7.81 | y | Enable custom IRQ handler at run time | 3.4.11 - 4.4.271 | Linux |
| CONFIG_MUSB_RSRV_NONE | 1 | 5.25 | y | TODO [PUMA5 high speed USB support] | 2.6.28.8 | Linux |
| CONFIG_MUTEX_FIFO | 9 | 7.04 - 8.00 | y | FIFO scheduler | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MUTEX_SPIN_ON_OWNER | 20 | 6.51 - 8.00 | y | MCS like mutex especially tailored for optimistic spinning | 2.6.39.4 - 5.15.153 | Linux |
| CONFIG_MXL_SKB_POOL_EXTENSION | 4 | 7.90 - 8.00 | y | [Networking options] | 5.15.153 | Linux |
| 404 config variables | ||||||
Goto: 0-9 - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - ALL
