If you like BoxMatrix then please contribute Supportdata, Supportdata2, Firmware and/or Hardware (get in touch).
My metamonk@yahoo.com is not reachable by me since years. Please use hippie2000@webnmail.de instead.
Property:Seale
| BoxMatrix >> Components >> Seale | @ BoxMatrix - IRC-Chat - Translate: de es fr it nl pl |
| News | Selectors | Models | Accessories | Components | Environment | Config | Commands | System | Webif | Software | Develop | Lexicon | Community | Project | Media |
| Codenames | SoC-Chips | RAM-Chips | Flash-Chips | FPGA-Chips | FON-Chips | DECT-Chips | WLAN-Chips | LAN-Chips | USB-Chips | Trafo-Chips | PSU-Chips | Misc-Chips | ALL-Chips |
Chip-Codename
| Codename: | Seale | Wiki | Freetz | IPPF | whmf | Web | |
| Creator: | Lantiq | Wiki | Freetz | IPPF | whmf | Web | |
| Vendor: | Lantiq | Wiki | Freetz | IPPF | whmf | Web | |
| Purpose: | Network-SoC | ||||||
| Description: | 800 / 1000MHz Dual Core MIPS32 / InterAptiv 34Kc Network SoC (GRX350/550) | ||||||
Chip-Details
Seale is the codename of a range of network SoCs, including the GRX350 and the GRX550, part of the VR10 and .VR11 chipsets.
It is the base of some FRITZ!Box 75xx routers. Intel considers the XRX350/550 Gen2 SoCS, the PRX300 used in 55xx fiber models Gen3 and x86 based SoCs used in 64xx-66xx cable models Gen4.
Multi-EVA boot on Lantiq-MIPS:
- SoCs: Seale, Falcon
- Lexicon: Bootcore, Interaptiv, PreEVA, EVA
- Commands: urladerupdate
- Kconfig: CONFIG_BOOTCORE_LOAD_ADDR
- Kconfig: CONFIG_SOC_PRX300_BOOTCORE, CONFIG_PRX300_BOOTCORE_WDT
- Kconfig: CONFIG_SOC_GRX500_BOOTCORE, CONFIG_SERIAL_GRX500_BOOTCORE_CONSOLE
- Kernel: cpunet.ko, grx_switch_console.ko
- Sysfs: switch_console
CPU-Info
root@fritz:/var/mod/root $ cat /proc/cpuinfo system type : GRX500 rev 1.2 machine : AVM7590ax (GRX550, HW259) Main model processor : 0 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 239.24 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : dsp mt eva Options implemented : tlb tlbinv segments 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm nan_legacy nan_2008 ebase_wg perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VPE : 0 VCED exceptions : not available VCEI exceptions : not available processor : 1 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 239.24 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : dsp mt eva Options implemented : tlb tlbinv segments 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm nan_legacy nan_2008 ebase_wg perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VPE : 1 VCED exceptions : not available VCEI exceptions : not available processor : 2 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 239.24 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : dsp mt eva Options implemented : tlb tlbinv segments 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm nan_legacy nan_2008 ebase_wg perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 1 VPE : 0 VCED exceptions : not available VCEI exceptions : not available processor : 3 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 239.24 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : dsp mt eva Options implemented : tlb tlbinv segments 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm nan_legacy nan_2008 ebase_wg perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 1 VPE : 1 VCED exceptions : not available VCEI exceptions : not available
GPL-Browser
Daily updated index of all Seale Tarballs unpacked to the GPL-Browser. Last update: 2025-05-26 03:55 GMT.
The Browse column lists the respective subdirectory of the gpl.boxmatrix.info service.
The SoC column lists the Chip-Codenames, the Model column lists the nicks of the Box-Models.
The Diff column links the comparison of the AVM Kernel to the pristine original from Kernel.org.
The Download column links the full tarball the respective directory content is extracted from.
| Browse | SoC | Arch | Model | Firmw | Diff | Download |
|---|---|---|---|---|---|---|
| seale-7590ac-750 | Seale | MIPS | 7590ac | 7.50 | 4.9.218 | Download |
| seale-7590ax-750 | Seale | MIPS | 7590ax | 7.50 | 4.9.218 | Download |
| seale-7590ax-800 | Seale | MIPS | 7590ax | 8.00 | 4.9.325 | Download |
| 3 partially unpacked Seale tarballs | ||||||
Firmware
This is a subset of the Binary-Files section, filtered for '*Seale*' or '*GRX*' or '*XRX*' binaries or descriptions.
Daily updated index of all binaries found scanning Firmware-Probes . Last update: 2025-05-26 04:32 GMT.
The label (static) in the Binary column shows there are other objects in this wiki using this name.
The Mod column shows the amount of models using the respective file. Click the column header to sort by this number.
You can hover or click a possible Link in the Type column to see the target of that link.
| Binary | Mod | Firmware | Description | Path | Size/Bytes | Type | Origin |
|---|---|---|---|---|---|---|---|
| ltq_fw_PHY11G_IP_xRx5xx_A21.bin | 10 | 7.19 - 8.00 | PHY11G firmware for Seale GRX5 | /lib/firmware | 64.0k | Blob | AVM |
| 1 files | |||||||
Modules
This is a subset of the Kernel-Modules section, filtered for '*Seale*' or '*GRX*' or '*XRX*' modules or descriptions.
Daily updated index of all kernel modules found scanning Firmware-Probes . Last update: 2025-05-26 04:32 GMT.
The label (module) in the Module column shows there are other objects in this wiki using this name.
The Mod column shows the amount of models using the respective module. Click the column header to sort by this number.
You can hover or click a possible Link in the Type column to see the target of that link.
| Module | Mod | Firmware | Description | Path | Size/Bytes | Type | Origin |
|---|---|---|---|---|---|---|---|
| cbm.ko | 6 | 6.51 - 6.93 | GRX500 Central Buffer Manager (CBM) Driver (GPL) | ./kernel/drivers/net/ethernet/lantiq/cbm | <builtin> | Mod | Linux |
| cbm_config.ko | GRX500 Central Buffer Manager (CBM) Config (GPL) | Linux | |||||
| cbm_proc.ko | 6 | 6.51 - 6.93 | GRX500 Central Buffer Manager (CBM) procfs (GPL) | ./kernel/drivers/net/ethernet/lantiq/cbm | <builtin> | Mod | Linux |
| clk-grx500.ko | GRX500 clock driver (GPL) | Linux | |||||
| dc_mode0-xrx500.ko | 10 | 7.19 - 7.31 | DC Mode0 support for XRX500 (GPL) | ./extra, ./extra/dc_mode/dc_mode0 | 28.0k - 33.1k | Mod | Lantiq |
| dlrx_fw.ko | 7 | 6.51 - 7.08 | DRE FW (GPL) | ./kernel/drivers/net/ethernet/lantiq/directlink/dlrx/dlrx_fw, ./kernel/drivers/net/lantiq_ppa/platform/xrx500/directlink | 33.8k - 36.6k | Mod | Lantiq |
| dwc3-grx500.ko | 10 | 7.19 - 8.00 | DesignWare USB3 GRX500 Glue Layer (GPL) | ./kernel/drivers/usb/dwc3 | <builtin> | Mod | Intel |
| grx500_bootcore-uart.ko | Driver for grx500_bootcore serial ports (GPL) | Lantiq | |||||
| grx500_wdt.ko | 12 | 7.24 - 8.00 | GRX500 Watchdog Driver (GPL) | ./kernel/drivers/watchdog | <builtin> | Mod | Intel |
| grx_switch_console.ko | Bootcore / Interaptiv console switcher (GPL) | Lantiq | |||||
| grx_wdt.ko | Seale hardware watchdog driver (GPL) | AVM | |||||
| leds-xrx500-proc.ko | LED driver for XRX500 SSO Unit sysfs (GPL) | Linux | |||||
| leds-xrx500.ko | LED driver for XRX500 SSO Unit (GPL) | Linux | |||||
| ltq_directpath_datapath.ko | 7 | 6.51 - 7.15 | Lantiq directpath datapath driver (Supported XRX500) (GPL) | ./kernel/drivers/net/lantiq_ppa/platform/xrx500 | 12.8k - 13.0k | Mod | Lantiq |
| ltq_dp_test.ko | 7 | 6.51 - 7.15 | Datapath Test Kernel Module (GPL) | ./kernel/drivers/net/lantiq_ppa/platform/xrx500 | 15.1k - 15.2k | Mod | Lantiq |
| ltq_eth_drv_xrx500.ko | 12 | 7.19 - 8.00 | Intel XRX500/PRX300 ethernet driver (GPL) | ./kernel/drivers/net/ethernet/lantiq | 34.3k - 69.5k, <builtin> | Mod | Lantiq |
| ltq_mpe_hal_drv.ko | 9 | 6.51 - 8.00 | MPE HAL (Routing/Bridging Acceleration) (GPL) | ./extra/platform/prx300, ./kernel/drivers/net/lantiq_ppa/platform/xrx500 | 128k - 214k | Mod | Lantiq |
| ltq_pae_hal.ko | 7 | 6.51 - 7.15 | PAE hardware abstraction layer (GPL) | ./kernel/drivers/net/lantiq_ppa/platform/xrx500 | 101k - 109k | Mod | Lantiq |
| ltq_tmu_hal_drv.ko | 7 | 6.51 - 7.15 | Lantiq TMU HAL (QoS) (GPL) | ./kernel/drivers/net/lantiq_ppa/platform/xrx500 | 190k - 242k | Mod | Lantiq |
| ltq_toe_drv.ko | Lantiq ToE (TCP Offload Engine) driver for XRX500 (GPL) | Lantiq | |||||
| phy-grx500-usb.ko | 10 | 7.19 - 8.00 | Intel DWC3 PHY Driver (GPL) | ./kernel/drivers/phy | <builtin> | Mod | Intel |
| spi-grx500.ko | 12 | 6.51 - 8.00 | Lantiq XRX500/PRX300 SPI controller driver (GPL) | ./kernel/drivers/spi | <builtin> | Mod | Linux |
| test-wave600_drv.ko | 10 | 7.21 - 7.81 | Intel DC test driver (Supported XRX500/PRX300) (GPL) | ./extra/test | 45.2k - 51.8k | Mod | Intel |
| xrx500-cpufreq.ko | 12 | 7.19 - 8.00 | XRX500/PRX300 Family SoC CPUFreq driver (GPL) | ./kernel/drivers/cpufreq | <builtin> | Mod | Linux |
| xrx500_phy_fw.ko | 12 | 7.19 - 8.00 | Lantiq XRX500/PRX300 PHY Firmware Loader (GPL) | ./kernel/drivers/net/ethernet/lantiq | 7.0k - 19.4k, <builtin> | Mod | Lantiq |
| 25 kernel modules | |||||||
Kernel-Config
This is a subset of the Kernel-Config section, filtered for '*Seale*' or '*GRX*' or '*XRX*' variables or descriptions.
Daily updated index of all kernel config variables found scanning Firmware-Probes . Last update: 2025-05-26 04:04 GMT.
The label (kerncfg) in the Variable column shows there are other objects in this wiki using this name.
The Mod column shows the amount of models using the respective variable. Click the column header to sort by this number.
| Variable | Mod | Firmware | Value | Description | Kernel | Origin |
|---|---|---|---|---|---|---|
| CONFIG_AVM_GRX500_IAP_WDT_NMI | 12 | 7.21 - 8.00 | y | Use NMI for the Interaptiv watchdog's barking irq | 4.9.198 - 4.9.276 | Linux |
| CONFIG_AVM_QOS_GRX_TMU | 7 | 6.51 - 7.15 | y | AVM QoS offload support using GRX TMU | 3.10.12 - 3.10.104 | Linux |
| CONFIG_AVM_WATCHDOG_GRX500 | 8 | 7.39 - 8.00 | y | GRX500 watchdog driver (avm.ko, avmwdt.ko, grx_wdt.ko) | 4.9.218 - 4.9.325 | Linux |
| CONFIG_DT_ANYWAN | GRX500 Anywan Board device tree (dtb.ko) | Linux | ||||
| CONFIG_GPIO_XRX500 | 7 | 6.51 - 7.19 | y | XRX500 GPIO support | 3.10.12 - 4.9.198 | Linux |
| CONFIG_GRX5 | 12 | 6.51 - 8.00 | y | GRX5 support | 3.10.12 - 4.9.325 | Linux |
| CONFIG_GRX500_CBM | 10 | 7.19 - 8.00 | y | GRX500 | 4.9.161 - 4.9.325 | Linux |
| CONFIG_GRX500_CLK | 10 | 7.19 - 8.00 | y | GRX500 CLK (clk-grx500.ko, clk_api.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_GRX500_IAP_WDT | 12 | 7.21 - 8.00 | y | GRX500 SoC watchdog for Interaptiv core (grx500_wdt.ko) | 4.9.198 - 4.9.276 | Linux |
| CONFIG_GRX5_AVM_FRITZ_BOX | 11 | 6.51 - 8.00 | y | GRX5 Fritzbpx support (dtb.ko, offload_pa.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_LEDS_XRX500 | 7 | 6.51 - 7.15 | y | LED driver for XRX500 SSO Unit (leds-xrx500-proc.ko, leds-xrx500.ko) | 3.10.12 - 3.10.104 | Linux |
| CONFIG_LTQ_DATAPATH_GRX750 | 4 | 7.14 - 8.00 | y | Datapath Lib for GRX750 | 4.9.175 - 5.15.153 | Linux |
| CONFIG_LTQ_DIRECTCONNECT_DP | 7 | 6.51 - 7.15 | y | Lantiq DirectConnect Datapath driver for XRX500 series | 3.10.12 - 3.10.104 | Linux |
| CONFIG_LTQ_ETH_XRX500 | 12 | 6.51 - 8.00 | m, y | Lantiq Ethernet driver for XRX500 series (ltq_eth_drv_xrx500.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_LTQ_PPA_GRX500 | 7 | 6.51 - 7.15 | y | PPA Acceleration Package - GRX500 Driver | 3.10.12 - 3.10.104 | Linux |
| CONFIG_LTQ_PPA_LRO | 7 | 6.51 - 7.15 | y | GRX500 LRO support in PPA | 3.10.12 - 3.10.104 | Linux |
| CONFIG_LTQ_TOE_DRIVER | 10 | 6.51 - 8.00 | y | Enable the TOE (TCP Offload Engine) driver for XRX500 (ltq_toe_drv.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_PHY_GRX500_USB | 10 | 7.19 - 8.00 | y | Lantiq GRX500 USB3 PHY Driver (phy-grx500-usb.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_PINCTRL_EQUILIBRIUM | 12 | 7.19 - 8.00 | y | Intel xrx500/prx300 pinctrl and GPIO driver (pinctrl-equilibrium.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_PINCTRL_XRX500 | 7 | 6.51 - 7.15 | y | XRX500 pinctrl driver | 3.10.12 - 3.10.104 | Linux |
| CONFIG_SERIAL_GRX500_BOOTCORE_CONSOLE | 3 | 7.50 | y | Console on GRX500 TEP(grx500_bootcore) console (early_printk.ko, grx500_bootcore-uart.ko) | 4.9.218 - 4.9.276 | Linux |
| CONFIG_SOC_GRX500 | 12 | 6.51 - 8.00 | y | Lantiq GRX500 'Seale' based design (avm.ko, grx_switch_console.ko, grx_wdt.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_SOC_GRX500_A21 | 7 | 6.51 - 7.15 | y | Lantiq GRX500 A21 specific changes | 3.10.12 - 3.10.104 | Linux |
| CONFIG_SOC_GRX500_BOOTCORE | 1 | 7.50 | y | GRX500_BOOTCORE (ngi.ko) | 4.9.218 | Linux |
| CONFIG_SOC_TYPE_GRX500_TEP | 3 | 7.50 | y | [Machine selection] (grx_switch_console.ko) | 4.9.218 - 4.9.276 | Linux |
| CONFIG_SPI_GRX500 | 12 | 6.51 - 8.00 | y | Lantiq GRX500 SPI controller (spi-grx500.ko) | 3.10.12 - 4.9.325 | Linux |
| CONFIG_USB_DWC3_GRX500 | 10 | 7.19 - 8.00 | y | DesignWare USB3 Lantiq GRX500 Platforms (dwc3-grx500.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_VRX518_GRX500 | 7 | 6.83 - 7.15 | y | TODO [Distributed Switch Architecture drivers] | 3.10.12 - 3.10.104 | Linux |
| CONFIG_XRX500_CPUFREQ | 12 | 7.19 - 8.00 | y | XRX500 CPUFreq Driver (xrx500-cpufreq.ko) | 4.9.161 - 4.9.325 | Linux |
| CONFIG_XRX500_ETH_DRV_COC_SUPPORT | 7 | 6.51 - 7.15 | y | CoC support in XRX500 ethernet driver | 3.10.12 - 3.10.104 | Linux |
| CONFIG_XRX500_PHY_FW | 12 | 6.51 - 8.00 | m, y | XRX500/PRX300 PHY firmware loader (xrx500_phy_fw.ko) | 3.10.12 - 4.9.325 | Linux |
| 31 config variables | ||||||
Chip-Variants
Chips using the codename or family name Seale:
Selectors >> Components-Selector >> SoC-Chips >> Seale
| Components-Selector | Cat. | Family | Coden. | Purpose | Iface | Creator | Vendor | Description |
|---|---|---|---|---|---|---|---|---|
| GRX550A3BC200-S-LMQ4 | SoC | GRX550 | Seale | Network-SoC | Lantiq | Intel | 1000MHz Dual Core MIPS32 / InterAptiv 34Kc Network SoC | |
| PXB4395EL1600-S-LLFB | SoC | GRX350 | Seale | Network-SoC | Lantiq | Intel | 800MHz Dual Core MIPS32 / InterAptiv 34Kc Network SoC | |
| PXB4583EL2000-S-LLK4 | SoC | GRX550 | Seale | Network-SoC | Lantiq | Intel | 1000MHz Dual Core MIPS32 / InterAptiv 34Kc Network SoC | |
| PXB4583EL2000-S-LLZR | SoC | GRX550 | Seale | Network-SoC | Lantiq | Intel | 1000MHz Dual Core MIPS32 / InterAptiv 34Kc Network SoC | |
| 4 Seale chips | ||||||||
Model-Matrix
Box-Models and Accessories using one of the Seale variants listed above:
Selectors >> Chips-Selector >> SoC-Chips >> Seale
Feature-Matrix
Features of Box-Models and Accessories using one of the Seale variants listed above:
| S € |
Model Languages, Brandings |
Internet [Annex] |
LAN Ports |
WLAN 802.11 |
PSTN Lines |
Phones | SoC Clock |
RAM | Flash | USB Host |
Image |
|---|---|---|---|---|---|---|---|---|---|---|---|
 
|
FRITZ!Box 6890 LTE v1 de, en, es, fr, it, nl, pl avm, avme |
SVect A, B, J, M LTE-Cat6 WLAN |
Gbit: 5 |
1,733 Mb +800 Mb 2.4GHz 5GHz |
POTS: 1 ISDN: 2 |
Analog: 2 ISDN: 8 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 1 USB: 3.0 |
|
|
|
FRITZ!Box 6890 LTE v2 de, en, es, fr, it, nl, pl avm, avme |
SVect A, B, J, M LTE-Cat6 WLAN |
Gbit: 5 |
1,733 Mb +800 Mb 2.4GHz 5GHz |
POTS: 1 ISDN: 2 |
Analog: 2 ISDN: 8 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 1 USB: 3.0 |
|
|
|
FRITZ!Box 7560 de, en, es, fr, it, pl 1und1, avm, avme |
Vect A, B, J, M USB-LTE WLAN |
Gbit: 4 |
866 Mb +450 Mb 2.4GHz 5GHz |
- | Analog: 1 DECT: 6 |
Seale GRX350 800 MHz |
256 MB | 128 MB | Ports: 1 USB: 2.0 |
|
|
|
FRITZ!Box 7580 de 1und1, avm |
Vect B, J USB-LTE WLAN |
Gbit: 5 |
1,733 Mb +800 Mb 2.4GHz 5GHz |
- | Analog: 2 ISDN: 8 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 2 USB: 3.0 |
|
|
|
FRITZ!Box 7583 de |
2xG.fast A, B, J, M USB-LTE WLAN |
Gbit: 5 |
1,733 Mb +800 Mb 2.4GHz 5GHz |
- | Analog: 2 ISDN: 16 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 2 USB: 3.0 |
|
|
|
FRITZ!Box 7583 VDSL de, en, es, fr, it, nl, pl 1und1, avm, avme |
2xSVect A, B, J, M USB-LTE WLAN |
Gbit: 5 |
1,733 Mb +800 Mb 2.4GHz 5GHz |
- | Analog: 2 ISDN: 16 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 2 USB: 3.0 |
- |
|
|
FRITZ!Box 7590 de, en, es, fr, it, nl, pl 1und1, avm, avme |
SVect A, B, J, M USB-LTE WLAN |
Gbit: 5 |
1,733 Mb +800 Mb 2.4GHz 5GHz |
POTS: 1 ISDN: 2 |
Analog: 2 ISDN: 8 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 2 USB: 3.0 |
|
 
|
FRITZ!Box 7590 AX |
SVect USB-LTE WLAN |
Gbit: 5 |
2,400 Mb +1,200 Mb 2.4GHz 5GHz Wi-Fi 6 |
POTS: 1 ISDN: 2 |
Analog: 2 ISDN: 8 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 2 USB: 3.0 |
|
|
|
FRITZ!Box 7590 AX v2 |
SVect A, B, J, M USB-LTE WLAN |
Gbit: 5 |
2,400 Mb +1,200 Mb 2.4GHz 5GHz Wi-Fi 6 |
- | Analog: 2 DECT: 6 |
Seale GRX550 1000 MHz |
512 MB | 512 MB | Ports: 2 USB: 3.0 |
|
Legend:
- = all variants of this model are still supported
= some variants of this model are end of support- = all variants of this model are end of support
- = at least one variant of this model is still sold
- = no variant of this model is sold any more (or not yet)
= a future model which is not yet sold or supported
This info is updated daily from the Part-Numbers section in each Box-Models article.
Gallery
If you want to extend the gallery with own work then please get in touch. See also the Photography-Inspiration article.
