If you like BoxMatrix then please contribute Supportdata, Supportdata2, Firmware and/or Hardware (get in touch).
My metamonk@yahoo.com is not reachable by me since years. Please use hippie2000@webnmail.de instead.

0
U

Property:iptunnel

From BoxMatrix


BoxMatrix >> Shell-Commands >> iptunnel @ BoxMatrix   -   IRC-Chat   -   Translate: de es fr it nl pl
News Selectors Models Accessories Components Environment Config Commands System Webif Software Develop Lexicon Community Project Media

Startup-Scr Hotplug-Scr BusyBox-Cmds Bash-Cmds AVM-Cmds Chipset-Cmds Linux-Cmds Shared-Libs Kernel-Mods Research

BusyBox-Command

Goto:   GPL-Browser  -  Dependencies   -   Model-Matrix   -   Symbols   -   SMW-Browser

Details

Excerpt from:   BusyBox manual   >>   iptunnel command

iptunnel { add | change | del | show } [NAME]
[mode { ipip | gre | sit }]
[remote ADDR] [local ADDR] [ttl TTL]
iptunnel { add | change | del | show } [NAME]
[mode { ipip | gre | sit }] [remote ADDR] [local ADDR]
[[i|o]seq] [[i|o]key KEY] [[i|o]csum]
[ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]

Excerpt from:   BusyBox source   >>   iptunnel command   -   Last update: 2024-11-17 04:55 GMT.

Usage:
    iptunnel add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]

ipaddr add|change|replace|delete dev IFACE [CONFFLAG-LIST] IFADDR
        IFADDR := PREFIX | ADDR peer PREFIX [broadcast ADDR|+|-]
                [anycast ADDR] [label STRING] [scope SCOPE]
        PREFIX := ADDR[/MASK]
        SCOPE := [host|link|global|NUMBER]
        CONFFLAG-LIST := [CONFFLAG-LIST] CONFFLAG
        CONFFLAG := [noprefixroute]
ipaddr show|flush [dev IFACE] [scope SCOPE] [to PREFIX] [label PATTERN]
Usage:
    iptunnel         [promisc on|off] [mtu NUM] [name NAME] [qlen NUM] [address MAC]
        [master IFACE | nomaster] [netns PID]

iplink add [link IFACE] IFACE [address MAC] type TYPE [ARGS]
iplink delete IFACE type TYPE [ARGS]
        TYPE ARGS := vlan VLANARGS | vrf table NUM        VLANARGS := id VLANID [protocol 802.1q|802.1ad] [reorder_hdr on|off]
                [gvrp on|off] [mvrp on|off] [loose_binding on|off]
        CANARGS := [bitrate BITRATE [sample-point SAMPLE-POINT]] |
                [tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
                phase-seg2 PHASE-SEG2 [sjw SJW]]
                [dbitrate BITRATE [dsample-point SAMPLE-POINT]] |
                [dtq TQ dprop-seg PROP_SEG dphase-seg1 PHASE-SEG1
                dphase-seg2 PHASE-SEG2 [dsjw SJW]]
                [loopback on|off] [listen-only on|off] [triple-sampling on|off]
                [one-shot on|off] [berr-reporting on|off]
                [fd on|off] [fd-non-iso on|off] [presume-ack on|off]
                [restart-ms TIME-MS] [restart]
                [termination 0..65535]
iplink show [IFACE]
Usage:
    iptunnel list|flush|add|del|change|append|replace|test ROUTE

iproute list|flush SELECTOR
        SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]
        PREFIX := default|ADDR[/MASK]
iproute get ADDR [from ADDR iif IFACE]
        [oif IFACE] [tos TOS]
iproute add|del|change|append|replace|test ROUTE
        ROUTE := NODE_SPEC [INFO_SPEC]
        NODE_SPEC := PREFIX        INFO_SPEC := NH OPTIONS
        NH := [via [inet|inet6] ADDR] [dev IFACE] [src ADDR] [onlink]
        OPTIONS := [mtu [lock] NUM] [advmss [lock] NUM]
Usage:
    iptunnel [list] | add|del SELECTOR ACTION

        SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK[/MASK]]
                        [dev IFACE] [pref NUMBER]
        ACTION := [table TABLE_ID] [nat ADDR]
                        [prohibit|reject|unreachable]
                        [realms [SRCREALM/]DSTREALM]
        TABLE_ID := [local|main|default|NUMBER]
Usage:
    iptunnel add|change|del|show [NAME]
        [mode ipip|gre|sit] [remote ADDR] [local ADDR] [ttl TTL]

iptunnel add|change|del|show [NAME]
        [mode ipip|gre|sit] [remote ADDR] [local ADDR]
        [[i|o]seq] [[i|o]key KEY] [[i|o]csum]
        [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]
Usage:
    iptunnel show|flush [to PREFIX] [dev DEV] [nud STATE]

||||
Usage:
    iptunnel [OPTIONS] linkneighrule [ARGS]

OPTIONS := -f[amily] inet|inet6|link | -o[neline]

Usage:
    iptunnel 
Usage:
    iptunnel 
Usage:
    iptunnel 
Usage:
    iptunnel 
Usage:
    iptunnel 
Usage:
    iptunnel 

Note that some options may not be compiled in. If Usage: is shown multiple times these are compile options.

GPL-Browser

Daily updated index of all iptunnel code findings on the GPL-Browser. Last update: 2024-11-17 05:19 GMT.
The Browse column points to the Path containing the respective source code on the gpl.boxmatrix.info service.
The SoC column lists the Chip-Codenames, the Model column lists the nicks of the Box-Models.
The Diff column links the comparison of the AVM Kernel to the pristine original from Kernel.org.
The Download column links the full tarball the respective directory content is extracted from.
The presence of the source does not mean it fits the respective model and architecture. See the Model-Matrix where it's used.

Excerpt from:   BusyBox manual   >>   iptunnel command   -   Last update: 2009-10-02 09:23 GMT.

Dependencies

Daily updated index of all dependencies of this command. Last update: 2024-11-17 07:59 GMT.
A * in the Mod column marks info from Supportdata-Probes, which will always stay incomplete.

Relation Typ Object Mod Firmware Info Origin
Symlink to cmd busybox (bbcmd) 66 4.85 - 7.51 The BusyBox executable itself. Contains the code for all applets. BusyBox
1 dependency for this command

Model-Matrix

Daily updated index of the presence, path and size of this command for each model. Last update: 2024-11-17 06:06 GMT.
Showing all models using this command. Click any column header (click-wait-click) to sort the list by the respective data.
The (main/scrpn/boot/arm/prx/atom/rtl) label in the Model column shows which CPU is meant for Multi-Linux models.
Note that this list is merged from Firmware-Probes of all known AVM firmware for a model, including Recovery.exe and Labor-Files.
The path <bb> means the applet could be located in the busybox binary and could be called busybox iptunnel.
If a path is shown and no <bb> marker, then this is a dead link to a missing applet.

Model Firmware Path Size
FRITZ!Box WLAN 3270 5.05 - 5.54 /bin, <bb> Link
FRITZ!Box WLAN 3270 v3 5.05 - 5.54 /bin, <bb> Link
FRITZ!Box WLAN 3270 IT 5.23 - 5.52 /bin, <bb> Link
FRITZ!Box 3272 (main) 5.50 - 6.89 /bin, <bb> Link
FRITZ!Box WLAN 3370 (main) 5.01 - 6.56 /bin, /sbin, <bb> Link
FRITZ!Box 3390 (main) 5.50 - 6.56 /bin, /sbin, <bb> Link
FRITZ!Box 3490 (main) 6.20 - 6.83 /bin, /sbin, <bb> Link
FRITZ!Box 3490 (scrpn) 6.98 - 7.30 /sbin, <bb> Link
FRITZ!Box 4020 6.84 /sbin, <bb> Link
FRITZ!Box 4040 6.52 - 6.83 /sbin, <bb> Link
FRITZ!Box 5490 (main) 6.51 - 6.84 /sbin, <bb> Link
FRITZ!Box 5490 (scrpn) 6.98 - 7.29 /sbin, <bb> Link
FRITZ!Box 5491 (scrpn) 6.98 - 7.29 /sbin, <bb> Link
FRITZ!Box 6320 Cable v1 6.03 - 6.04 /bin, <bb> Link
FRITZ!Box 6320 Cable v2 6.21 /bin, <bb> Link
FRITZ!Box 6340 Cable 5.24 /bin, <bb> Link
FRITZ!Box 6360 Cable 4.85 - 6.51 /bin, <bb> Link
FRITZ!Box 6430 Cable (arm) 6.84 - 6.87 /bin, <bb> Link
FRITZ!Box 6430 Cable (atom) 6.84 - 6.87 /bin, <bb> Link
FRITZ!Box 6490 Cable (arm) 6.20 - 6.87 /bin, <bb> Link
FRITZ!Box 6490 Cable (atom) 6.20 - 6.87 /bin, <bb> Link
FRITZ!Box 6590 Cable (arm) 6.83 - 6.110 /bin, <bb> Link
FRITZ!Box 6590 Cable (atom) 6.83 - 6.110 /bin, <bb> Link
FRITZ!Box 6591 Cable (arm) 7.04 - 7.13 /sbin, <bb> Link
FRITZ!Box 6591 Cable (atom) 7.04 - 7.13 /sbin, <bb> Link
FRITZ!Box 6810 LTE 6.35 /bin, <bb> Link
FRITZ!Box 6820 LTE v1 (main) 6.40 - 6.83 /bin, <bb> Link
FRITZ!Box 6820 LTE v2 (main) 6.40 - 6.83 /bin, <bb> Link
FRITZ!Box 6840 LTE (main) 5.08 - 6.88 /bin, /sbin, <bb> Link
FRITZ!Box 6842 LTE /bin, <bb> Link
FRITZ!Box Fon WLAN 7240 5.04 - 6.06 /bin, <bb> Link
FRITZ!Box Fon WLAN 7270 v2 5.01 - 6.06 /bin, <bb> Link
FRITZ!Box Fon WLAN 7270 v3 5.01 - 6.06 /bin, <bb> Link
FRITZ!Box 7272 (main) 5.55 - 6.88 /bin, <bb> Link
FRITZ!Box 7312 5.23 - 6.56 /bin, <bb> Link
FRITZ!Box Fon WLAN 7320 4.85 - 6.35 /bin, <bb> Link
FRITZ!Box 7330 5.06 - 6.56 /bin, <bb> Link
FRITZ!Box 7330 SL 5.08 - 6.56 /bin, <bb> Link
FRITZ!Box Fon WLAN 7340 5.04 - 5.05 /bin, <bb> Link
FRITZ!Box Fon WLAN 7360 SL 5.04 - 6.34 /bin, <bb> Link
FRITZ!Box Fon WLAN 7360 v1 5.06 - 6.36 /bin, <bb> Link
FRITZ!Box Fon WLAN 7360 v2 5.22 - 6.88 /bin, /sbin, <bb> Link
FRITZ!Box 7362 SL (main) 5.53 - 6.98 /bin, /sbin, <bb> Link
FRITZ!Box 7369 (main) 6.30 - 6.32 /bin, <bb> Link
FRITZ!Box Fon WLAN 7390 5.01 - 5.22 /bin, <bb> Link
FRITZ!Box 7412 (main) 6.21 - 6.88 /bin, /sbin, <bb> Link
FRITZ!Box 7430 (main) 6.26 - 6.98 /bin, /sbin, <bb> Link
FRITZ!Box 7490 (main) 5.57 - 6.98 /bin, /sbin, <bb> Link
FRITZ!Box 7490 (scrpn) 6.98 - 7.51 /sbin, <bb> Link
FRITZ!Box 7560 (main) 6.98 /sbin, <bb> Link
FRITZ!Box 7580 (main) 6.98 /sbin, <bb> Link
FRITZ!Box 7581 6.54 - 6.85 /sbin, <bb> Link
FRITZ!Box 7582 6.83 /sbin, <bb> Link
FRITZ!Box 7590 (main) 6.98 /sbin, <bb> Link
FRITZ!WLAN Repeater 300E 5.01 - 6.34 /bin, <bb> Link
FRITZ!WLAN Repeater 310 A 5.24 - 6.92 /bin, <bb> Link
FRITZ!WLAN Repeater 310 B 6.30 - 6.92 /sbin, <bb> Link
FRITZ!WLAN Repeater 450E 6.00 - 6.92 /bin, <bb> Link
FRITZ!WLAN Repeater 1160 6.51 - 6.92 /sbin, <bb> Link
FRITZ!WLAN Repeater 1750E 6.12 - 6.93 /bin, <bb> Link
FRITZ!WLAN Repeater DVB-C 6.12 - 6.92 /bin, <bb> Link
FRITZ!Powerline 540E 5.58 - 6.92 /bin, <bb> Link
FRITZ!Powerline 546E 5.50 - 6.92 /bin, <bb> Link
FRITZ!Powerline 1240E 6.33 - 6.92 /sbin, <bb> Link
FRITZ!Powerline 1260E 6.90 - 6.92 /sbin, <bb> Link
Speedport W 504V MK 5.04 /bin, <bb> Link
66 models use this command

Symbols

Daily updated index of all symbols of this command. Last update: 2024-11-17 07:59 GMT.

Firmware Symbol
0 symbols for this command

SMW-Browser

Information is currently being retrieved from the backend.