If you like BoxMatrix then please contribute Supportdata, Supportdata2, Firmware and/or Hardware (get in touch).
My metamonk@yahoo.com is not reachable by me since years. Please use hippie2000@webnmail.de instead.
Property:lan0
| BoxMatrix >> System >> lan0 | @ BoxMatrix - IRC-Chat - Translate: de es fr it nl pl |
| News | Selectors | Models | Accessories | Components | Environment | Config | Commands | System | Webif | Software | Develop | Lexicon | Community | Project | Media |
| Devices | Filesystems | Partitions | Sockets | Netlink | Pipes | Interfaces | Bridges | Ports | Events | Sources | Sinks | AVMIPC | Processes | Watchdogs | Memory | Slab | Vmalloc | ProcFS | SysFS | Research |
Network-Interface
| Interface: | lan0 - type Ethernet | Wiki | Freetz | IPPF | whmf | AVM | Web |
| Location: | System >> Network-Interfaces - Origin: AVM | ||||||
| IP: | 192.168.100.1 | ||||||
| Properties: | Firmware: 6.08 - 7.61 | ||||||
| Function: | Internal ARM modem interface for Puma6 / Puma7 models | ||||||
Goto: Dependencies - Model-Matrix - Missing Supportdata - SMW-Browser
Details
lan0 is the internal ARM modem interface on Puma6 / Puma7 models.
It is the CMCI (Cable Modem to CPE Interface) ISP configuration interface, which is routed to a separate virtual connection.
It has the hardcoded IP 192.168.100.1 (defined by the DOCSIS specification) and uses the usb_rndis_mac MAC address.
It serves the ATOM Webinterface on Port-80-tcp and Port-443-tcp, which is proxied by pumaglued.
Optionally Port-8089-tcp could be forwarded for TR-069, also proxied by pumaglued.
Besides this snmp_agent_cm is also listening on this IP, on Port-161-udp and Port-162-udp.
Excerpt from showdsldstat of a DOCSIS connection with separate virtual connections for inet, voip and lan0:
2: name lan0 (attached) 2: sync_group: sync_lan0 2: iface lbr0 RBE/32/dsl e2:4b:a7:xx:xx:xx (local) stay online 1 2: IPv6: off 2: IPv4: native 2: IPv4: connected since 2022-05-11 13:49:39 (setup time 67 secs) (connect cnt 3) 2: IPv4: disconnect prevention disabled 2: IPv4: ip 192.168.100.2 mask 255.255.255.0 gw 0.0.0.0 mtu 1500 2: IPv4: masqaddr 192.168.100.2 2: route 192.168.100.0/24 protocol iface 2: RX bytes:0 pkt error:0 discard:0 filtered:0 dropped:0 2: RX pkts:0 unicast:0 multicast:0 broadcast:0 2: TX bytes:0 pkt error:0 discard:0 filtered:0 dropped:0 2: TX pkts:0 unicast:0 multicast:0 broadcast:0
RBE is routed bridge encapsulation, a Cisco implementation of bridged Ethernet over ATM with a separate broadcast domain
for every ATM circuit. It provides the multiplexing of the virtial connections.
Connections 0: (inet) and 1: (voip) use the sync_group sync_cable and both route to the erouter0 interface.
Connections 2: (lan0) uses the sync_group sync_lan0 and "routes" to the lbr0 interface, the lan0 bridge.
Dependencies
Daily updated index of all dependencies of this interface. Last update: GMT.
A * in the Mod column marks info from Supportdata-Probes, which will always stay incomplete.
A ** in the Mod column marks info from Supportdata2 probes, which by their nature will stay way more incomplete.
A - in the Mod column marks manual research, the Firmware then shows where the item occurs, not the Relation.
| Relation | Typ | Object | Mod | Firmware | Info | Origin |
|---|---|---|---|---|---|---|
| 0 dependencies for this interface | ||||||
Model-Matrix
Daily updated index of the presence, path and size of this interface for each model. Last update: 2024-12-21 07:02 GMT.
Showing all models using this interface. Click any column header (click-wait-click) to sort the list by the respective data.
The (main/scrpn/boot/arm/prx/atom/rtl) label in the Model column shows which CPU is meant for Multi-Linux models.
Note that this list comes from Supportdata-Probes, which can have arbitrary settings and come from different firmware versions.
It doesn't say much if a model is not listed here. It may be a missing supportdata file or just a disabled feature.
| Model | Firmware | IP | MAC |
|---|---|---|---|
| FRITZ!Box 6430 Cable (arm) | 6.87 - 7.29 | 192.168.100.1 | usb_rndis_mac |
| FRITZ!Box 6490 Cable (arm) | 6.08 - 7.24 | 192.168.100.1 | usb_rndis_mac |
| FRITZ!Box 6590 Cable (arm) | 6.87 - 7.20 | 192.168.100.1 | usb_rndis_mac |
| FRITZ!Box 6591 Cable (arm) | 7.01 - 7.29 | 192.168.100.1 | usb_rndis_mac |
| FRITZ!Box 6660 Cable (arm) | 7.13 - 7.29 | 192.168.100.1 | usb_rndis_mac |
| FRITZ!Box 6670 Cable (arm) | 7.59 - 7.61 | 192.168.100.1 | <other> |
| FRITZ!Box 6690 Cable (arm) | 7.29 - 7.57 | 192.168.100.1 | usb_rndis_mac |
| 7 models use this interface | |||
Missing Supportdata
The data in this article is incomplete due to missing Supportdata-Probes for the models listed below.
If you own any of these models and would like to help then please get in touch.
| Model | Method | Info |
|---|---|---|
| FRITZ!Box WLAN 3270 IT | lua | http://fritz.box/support.lua |
| FRITZ!Box Fon ata | html | http://fritz.box/html/support.html |
| FRITZ!Box Fon ata 1020 | html | http://fritz.box/html/support.html |
| FRITZ!Box Fon 5010 | html | http://fritz.box/html/support.html |
| FRITZ!Box Fon 5012 | html | http://fritz.box/html/support.html |
| FRITZ!Box Fon WLAN 7113 INT | html | http://fritz.box/html/support.html |
| Speedport W 501V | telnet | |
| Speedport W 722V | console | |
| Eumex 300 IP | telnet | |
| 9 models without supportdata probes | ||
